1. Serie de transmisores de TV Rohde & Schwarz
NEW!
R&S® NM/NW8500(VHF)
R&S® THU9 (UHF)
R&S® NH/NV8600(UHF)
R&S® NH/NV8300(UHF),
R&S® NM/NW8200(VHF)
R&S®SCx8000(UHF/VHF)
High power
R&S®SV8000(UHF)
Medium power
R&S®SLx/XLx8000(UHF/VHF)
Low power

2. R&S®SCx8000 SCx8000 – UHF and VHF
Multistandard platform
Digital standards:
DVB-T/H
ATSC
ATSC Mobile DTV
DAB, DAB+,T-DMB
MediaFLO
ISDB-T(B)
Analog standards
B/G, D/K, M, M1, N, I, I1
SCx8000 transmitters:
SCV UHF TV transmitters
SCW8000- VHF TV transmitters
SCA VHF DAB transmitters
Transmitter R&S®SCx8000,
configured as SCV8302E, 600W DVB-T
Efficiency of up to 22% for UHF and up to 24% for VHF, saves energy costs
Broadband pre-corrected for quick commissioning

3. R&S®SCx8000 transmitter series Components
600W COFDM configuration SCV8302E in seven 19’’ HUs (UHF)
1 HU for R&S®SX801
3 HU for R&S®VH8301C1, basis amplifier
3 HU for R&S®VH8301C2 extension amplifier
600W COFDM configuration R&S®SCW8601E in only four 19’’ HUs (VHF) !
1 HU for R&S®SX801
3 HU for R&S®VM8601C1

4. R&S®SX801 Backup exciter - Block diagram
Comparison Backup Exciter and Dual Drive with NETCCU800
Remote
R&S®SX801 (Control)
Control
Exciter A
Remote
R&S®SX801(Program)
Exciter B RF
Control
CAN
Amplifier stage
R&S®NetCCU800
Remote
Rack
controller
Amplifier stage
CAN
Backup exciter
“Standard” dual drive with R&S®NETCCU800 for Nx8000 systems

5. R&S®SCx8000 transmitter series SCV8000 UHF output power classes
Amplifiers
Output power *
COFDM
ATSC / ATSC Mobile DTV
ATV
SCV8201x
1x VH8201C1
200 W
300 W
500 W
SCV8301x
1xVH8301C1
450 W
700 W
SCV8202x +
1x VH8201C2
400 W
600 W
1000 W
SCV8302x
1x VH8301C1
1x VH8301C2
900 W
1400 W
* output power depends on frequency, the given numbers are average powers

6. R&S®SCx8000 transmitter series SCW/SCA8000 VHF output power classes
Amplifier
Output power *
COFDM
(SCW)
ATSC / ATSC Mobile DTV (SCW)
ATV
DAB
(SCA)
SCW/SCA8201
1x VM8201C1
200 W
350 W
SCW/SCA8301x
1xVM8301C1
300 W
550 W
SCW/SCA8401x
1x VM8401C1
400 W
700 W
SCWSCA8601x
1x VM8601C1
600 W
1100 W
* output power depends on frequency, the given numbers are average powers before filter

7. R&S®VH8000Cx UHF base amplifier - Block diagram
Block diagram of R&S®VH8000C1, 200W/300W
Dual Power Adaptor Board
Power Supply 1
Power Supply 3
(optional)
Power Supply 2
Fan 2
Amplifier
Control
Final Stage
Control (CAN)
Fan 1
Rf in
Splitter / exciter
switch
Rf in
Ext. amp out
RF Monitor
Driver Stage
RF out (N)
Amplifier Board

8. R&S®VH8000Cx UHF expansion amplifier - Block diagram
Block diagram of R&S®VH8000C2, 200W/300W
Dual Power Adaptor Board
Power Supply 1
Power Supply 3
(optional)
Power Supply 2
Fan 2
Amplifier
Control
Final Stage
Control (CAN)
Fan 1
Combiner
RF in (N)
RF out (7/16)
Rf in
RF monitor
Driver Stage
Amplifier Board
RF out (N)

9. R&S®SCx8000 transmitter series R&S®VM8x01C1 VHF Amplifier
Two power supplies ensure transmission with maximal 6dB power loss in case one power supply fails
In case one of the three power supply fails, output power is reduced by 1 dB
In case one fails one blower is able to cool the system without power loss (up to 80°C
Air flow

10. R&S®SCx8000 transmitter series Head End Proposal
HD/SD
ONE SEG
HD/SD/ ONE SEG
BTS RF
Mask Filter
HD/SD
ONE SEG

11. Muchas gracias por su tiempo!