2. A case should be... The mission of YY-W2xx Server Chassis Application Power User Workstation Small and Medium Business Pedestal Server Quick view at products spec. Versatile High reliable rackmount Pedestal server chassis It is very flexible, could be rack mounted, could be stand alone, single or redundant power supplies, and supports hard drives hot swappable in built in special design backplane or in modules. Either IDE hard drives or 1" Ultra160 SCSI hard drives. This chassis enables you to meet a variety of customer needs with one chassis.

3. A case should be... Multi-function chassis, Pedestal (YY-W2xx) and Rackmount(YY-R5xx) Case dimension 220mm W x 600mm D x 427mm H Motherboard configuration extended ATX, ATX, Micro ATX Drive configuration (3-combination) –8 * 5.25" exposed + 2*3.5” hidden or –5 * 5.25” exposed + 7*3.5" hidden System cooling fan –Built-in 12 cm Ball-bearing fan + 2*6cm rear-mounted Front panel control –Power switch, Reset switch, USB*2 Front panel LED –Power, HDD, Fan Alarm, HDD Failure LED, Lan*2, USBx4(Optional) Materials –Metal:Recyclable SECC metal –Plastic :UL approved flame retardant parts –Steel chassis t0.8~1.2mm Emissions Designed to meet FCC class B-47CFR part 15 /IEC/CISPR 22 Net Weight 14.0kg without PSU Color Cool gray, Black Power Supply EPS12V, ATX12V SINGLE OR REDUNDANT P’SU W201W202 R501

4. A case should be... Single ATX/EPS12V or Redundant P’su Built in 1x12cm DC fan for hard drives and core areas Optional 2x6cm DC fan for AGP/PCI cards Optional card clamp holder for fixing add- on card Allow EEB3.5 M/B (12”x13”) CEB1.1 M/B (12”x10.5”) Optional Intrusion Switch Flexible and easy install drive bays. Type A: 8x5.25” exposed Type B: 5x5.25”exposed+ 5x3.5” HDD hidden Type C: 4x5.25”exposed+ 6x3.5” HDD hot swappable w/backplane YY-W201 Server Chassis, Pedestal & 5U rackmount versatile

5. A case should be... YY-W201 Server Chassis, Pedestal & 5U rackmount versatile VERSATILE 5.25” DRIVE BAYS, TO KEEP CD ROM IN HORIZONTAL IN RACKMOUNT USE. With CONVERTIBLE DRIVE BAYS, 3 BAYS OF 5.25” COULD BE ALWAYS KEPT IN HORIZONTAL

6. A case should be... The vented panel should be retained as an air inlet for core area cooling Snap in Front Bezel, could be fixed and locked after system installed Open side panel with handle Slide in rails for drives install Optional fixed HDD cage for 5-devices Easy swap fan to HDD cage *USBx4 Front Access YY-W201 Server Chassis, Pedestal & 5U rackmount versatile

7. A case should be... Optional Intrusion switch Optional Card Clamp holder for fixing Add on cards Adjustable holder for various length, height of Add on cards Power Supply could be Single ATX/EPS12V, or Redundant Power Supply Excellent Air Flow for hard drives and core areas Optional 6cmx2 cooling fans for AGP/PCI cards YY-W201 Server Chassis, Pedestal & 5U rackmount versatile

8. A case should be... HDD frame for 5-devices HDD, with anti-vibration soft mounting kits and 9cm cooling fan Free to build your own raid module or HDD enclosures Type A: 8*5.25”drive bays Type B: 5*5.25”+5*3.5”HDD drive bays Type C: 2*3 1”H hot swap module in 4x5.25” device 2 x 3-devices hot swappable HDD raid module, for IDE ATA66.100/133, SCA Ultra160/320 or SATA HDD Flexible combination driver bay

9. A case should be... Flexible Combination Driver Bay Specifications: Material: Aluminum Interface: SI-0237SS, SI-0347SS, SI-0357SS  Serial ATA SI-0237C, SI-0357C  SCA2 Ultra320 SI-0237A, SI-0347A, SI-0357A  ATA66/100/133 Hot-Swap: Level 4 (Bus may have active I/O processes on going, but device being inserted or removed must be idle) SAF-TE: HDD fail detect function optional (SI- 0375CS w/SAF-TE) Alarm System: Buzzer beeping in case of fan error. (stop, disconnect, speed slow down) Feature: Front Led display: HDD full, power access, SCSI ID. YY-W201 with Raid module Hot-Swappable solution for SATA (Serial ATA), SCA2 ULTRA320, and IDE ATA133 HDD SI-0237 SI-0347 SI-0357

10. A case should be... 427mm 600mm 220mm EEB 3.5 compliance www.ssiforum.orgwww.ssiforum.org CEB 1.1 compliance Compact & Scaleable Hard Tooling Production Multiple Chassis; rackmount (5U) & Pedestal Dust Filter behind Front bezel Control Panel: Power Failure LED LAN LED x2 HDD LED Power on LED Reset Switch Power Switch

11. A case should be... EIA-310D compliance EEB 3.5 compliance, refer to www.ssiforum.org Telescopic slides (24”) is optional How to make it as rackmount : 1. To remove top cover and bottom cover of chassis 2. Screw in rack bracket and handles 3. Slide in to EIA rack

12. A case should be... http://www.intel.com/support/motherboards/server/s hg2/chassis_list.htm

13. A case should be... http://www.intel.com/support/motherboards/server/s e7501br2/chassis_list.htm

14. A case should be... http://www.intel.com/support/motherboards/server/s e7501cw2/chassis_list.htm

15. A case should be... http://support.intel.com/support/motherboards/server /se7500cw2/sb/CS-006857.htm

16. A case should be... http://support.intel.com/support/motherboards/server /se7501hg2/sb/CS-007319.htm

17. A case should be... http://support.intel.com/support/motherboards/server /se7505vb2/sb/CS-007378.htm