1. By Jacob Campbell

2. a motherboard is the central printed circuit board (PCB) in many modern computers and holds many of the crucial components of the system, providing connectors for other peripherals. The motherboard is sometimes alternatively known as the main board, system board, or, on Apple computers, the logic board. It is also sometimes casually shortened to mobo.

3.  Motherboards contain some non-volatile memory to initialize the system and load an operating system from some external peripheral device. Microcomputers such as the Apple II and IBM PC used ROM chips, mounted in sockets on the motherboard. At power-up, the central processor would load its program counter with the address of the boot ROM and start executing ROM instructions, displaying system information on the screen and running memory checks, which would in turn start loading memory from an external or peripheral device (disk drive).

4.  A power supply is a device that supplies electrical energy to one or more electric loads. The term is most commonly applied to devices that convert one form of electrical energy to another, though it may also refer to devices that convert another form of energy (e.g., mechanical, chemical, solar) to electrical energy.

6.  A drive bay is a standard-sized area for adding hardware to a computer. Most drive bays are fixed to the inside of a case, but some can be removed.

7.  The central processing unit (CPU) is the portion of a computer system that carries out the instructions of a computer program, to perform the basic arithmetical, logical, and input/output operations of the system. The CPU plays a role somewhat analogous to the brain in the computer. The term has been in use in the computer industry at least since the early 1960s.The form, design and implementation of CPUs have changed dramatically since the earliest examples, but their fundamental operation remains much the same.

8.  The fundamental operation of most CPUs, regardless of the physical form they take, is to execute a sequence of stored instructions called a program. The program is represented by a series of numbers that are kept in some kind of computer memory.

9.  Random access memory (RAM) is a form of computer data storage. Today, it takes the form of integrated circuits that allow stored data to be accessed in any order with a worst case performance of constant time. Strictly speaking, modern types of DRAM are therefore not random access, as data is read in bursts, although the name DRAM / RAM has stuck. However, many types of SRAM, ROM, OTP, and NOR flash are still random access even in a strict sense.

10.  RAM is often associated with volatile types of memory (such as DRAM memory modules), where its stored information is lost if the power is removed.

11.  A hard disk drive (HDD; also hard drive, hard disk, or disk drive) is a device for storing and retrieving digital information, primarily computer data. It consists of one or more rigid (hence "hard") rapidly rotating discs (often referred to as platters), coated with magnetic material and with magnetic heads arranged to write data to the surfaces and read it from them.

12.  Hard drives are classified as non-volatile, random access, digital, magnetic, data storage devices. Introduced by IBM in 1956, hard disk drives have decreased in cost and physical size over the years while dramatically increasing in capacity and speed.

13.  A computer fan is any fan inside, or attached to, a computer case used for active cooling, and may refer to fans that draw cooler air into the case from the outside, expel warm air from inside, or move air across a heatsink to cool a particular component.

14.  The expansion card (also expansion board, adapter card or accessory card) in computing is a printed circuit board that can be inserted into an expansion slot of a computer motherboard or backplane to add functionality to a computer system via the expansion bus.  One edge of the expansion card holds the contacts (the edge connector) that fit exactly into the slot. They establish the electrical contact between the electronics (mostly integrated circuits) on the card and on the motherboard.

15.  Ports & Connectors The various connectors and ports on the computer allow it to communicate with the many different devices and peripherals attached. Because there are so many cables and cords attached to the back of the computer, and so many different types of connectors, it often seems a little intimidating to the newer user.

16.  Although there are some devices which may use the same connector or port, the individual devices and their cords can only physically attach to one certain type of connector; so don't feel nervous about hooking your system together.

17.  http://en.wikipedia.org/wiki/Motherboard http://en.wikipedia.org/wiki/Motherboard  http://en.wikipedia.org/wiki/Power_supply http://en.wikipedia.org/wiki/Power_supply  http://en.wikipedia.org/wiki/Drive_bay http://en.wikipedia.org/wiki/Drive_bay  http://en.wikipedia.org/wiki/Central_processin g_unit http://en.wikipedia.org/wiki/Central_processin g_unit  http://en.wikipedia.org/wiki/Random- access_memory http://en.wikipedia.org/wiki/Random- access_memory  http://en.wikipedia.org/wiki/Hard_disk_drive http://en.wikipedia.org/wiki/Hard_disk_drive

18.  http://en.wikipedia.org/wiki/Computer_fan http://en.wikipedia.org/wiki/Computer_fan  http://en.wikipedia.org/wiki/Expansion_card http://en.wikipedia.org/wiki/Expansion_card  http://www.pccomputernotes.com/connectors &ports/ports.htm http://www.pccomputernotes.com/connectors &ports/ports.htm