1. Wheel Alignment Fundamentals Chapter 60 Page 875

2. Terms Toe Toe Camber Camber Caster Caster Steering Axis Inclination Steering Axis Inclination Turning Radius Turning Radius

3. Secondary Terms Cradle Cradle Tracking Tracking Setback Setback Understeer Understeer Oversteer Oversteer Slip angle Slip angle Wheelbase Wheelbase Ride height Ride height Road crown Road crown Highway crown Highway crown

4. Toe In Measurement of the front vs rear of the tires when looking over the top. Measurement of the front vs rear of the tires when looking over the top.

5. Camber Measured at the top of the tire, inward leaning = negative camber--outward leaning = positive camber Measured at the top of the tire, inward leaning = negative camber--outward leaning = positive camber

6. Caster Angle that the steering support makes is the caster measurement. The example below is positive caster mainly used with power steering. Angle that the steering support makes is the caster measurement. The example below is positive caster mainly used with power steering.

7. Steering Axis Inclination

8. Scrub Radius

9. Turning Radius

10. Cradle

11. Tracking

12. Setback

13. Understeer

14. Oversteer

15. Slip Angle

16. Ride Height