1. The special unit for special tasks

2.  Installation possibilities Private area Special object Industrial park

3. Technical specifications Power supply voltage: 9-36 Vdc Current: 200 mA 4 freely-configurable input channels 4 NC relay outputs Remote outputs testing 250m sensor cable/input (max.) Starting point is extendable (max. 500m) using ‘DC’ (non-sensitive) cable Radio interference- resistant metal housing (IP65-rated) Programming via computer (RS485 protocol) 256 network address, in bus line used Operating temperature: -40 to +65 C

4. The sensor cable

5. The sensor cable core connection tube

6. 4 freely-configurable input channels Vibration (sensor) cable Seismic sensor (optional) Frequency detector (not used) PIR sensor (not used)

7. Fence detection system

8. The fence sensor cable operation Functioning of the system: Because the cable is physically responsive to the fence to which it is affixed, it senses any abnormal movement/vibration of the fence. If an intruder attempts to climb the fence, it will move horizontally and vertically, and the sensor cable will detect this movement. The more sensor cable applied to a given section of fence (depending on its characteristics and condition), the more precise the digital conversion of the received analog signal – that’s why QuadroSense generates fewer false alarms.

9. Sensor cable installation

10. Use of an optional, intermediate 'DC' cable between the QuadroSense central unit and the sensor cable permits placement of the sensor cable up to 500m away from the central unit. If the ‘DC’ cable is cut, QuadroSense immediately generates an alarm signal. Fence detection at work

11. Sawing and cutting detection View and adjust two related parameters in real-time mode: HF parameters To detect attempted sawing and/or cutting of the sensor cable LF parameters To detect attempted climbing and/or scaling of the fence

12. Seismic sensor Max. 12 sensors per channel Max. 15m diameter detection zone per sensor Not visible after installation

13. Programming All inputs are programmable by computer (RS485 protocol) - it is possible to fine-tune the system.

14. Installations world-wide Hungary Slovakia Lithuania Russia Poland Italy Spain France Canada

15. Installation Option 1.

16. Installation Option 2.

17. Installation Option 3.

18. Installation Option 4.

19. Installation Option 5.

20. Easy and simple combinability

21. Easy and simple assimilation

22. Detection zone sensor cable Easy and simple integration

23. Contact details: peter@umirs.eupeter@umirs.eu info@umirs.eu www.umirs.eu Thank you for your attention!