1. GS2060/TL260GS Product Technical Training
2-Way Wireless Security Suite

2. GS2060/TL260GS – Product Overview
2-Way Wireless Security Suite

3. 2-Way Wireless Security Suite
GS2060
GS2060 GSM/GPRS Wireless Alarm Communicator
Overview:
The GS2065 provides primary or backup GSM/GPRS communication for Power Series PC1864/1832/1616 control panels
Specifications:
Dimensions : 3.937"x5.875"x0.625"
(100mmx150mmx15mm)
Weight : 310 g
Antenna Gain : 2db
Input Voltage : 11.1 to 12.6 V (from the Panel Bell output)
Current Draw : 65 mA at 12V (400 mA
during the GSM transmission)
Operating Environment : 5 º C to 40º C
(40º F to 104º F)
READ SCREEN
PASS MODULE AROUND
2-Way Wireless Security Suite

4. 2-Way Wireless Security Suite
GS2060
GS2060 GSM/GPRS Wireless Alarm Communicator
Features:
Back up and primary GSM/GPRS alarm communication
Panel remote uploading/downloading support via GSM/GPRS
Individual Periodic Test Transmission via GSM/GPRS
Supervision heartbeats via GSM/GPRS
128-bit AES encryption over GSM/GPRS
Full event reporting
SIA format
PC-Link connection
SIM card included
Signal strength and trouble display
Activating and initializing through Connect 24
Quad-Band: 850 MHz, 1900 MHz, 900 MHz
and 1800 MHz
READ SCREEN
2-Way Wireless Security Suite

5. 2-Way Wireless Security Suite
GS2060
GS2060 GSM/GPRS Wireless Alarm Communicator
Compatible Control Panel & Cabinet
Control panel: Power Series PC1864/1832/1616 version 4.1 and higher
Cabinet: PC5003C and PC4050C
Compatible Receivers:
Sur-Gard System I Receiver: version 1.10 and higher
Sur-Gard System II Receiver: version 2.00 and higher
Sur-Gard SG-DRL3-IP: version 2.20 and higher (for Sur-Gard System III Receiver)
Product Model and Accessories:
GS2060GS-USA: For US market with AT&T SIM card
GS2060GS-CDN: For Canada market with Roger SIM card
GS-15ANTQ: Antenna Extension Kits with 15 feet cable
GS-25ANTQ: Antenna Extension Kits with 25 feet cable
GS-50ANTQ: Antenna Extension Kits with 50 feet cable
READ SCREEN
2-Way Wireless Security Suite

6. 2-Way Wireless Security Suite
TL260GS
TL260GS Internet and GSM/GPRS Dual-Path Alarm Communicator
Overview:
The TL260GS is an Internet and GSM/GPRS Dual-Path alarm communication for Power Series PC1864/1832/1616 control panels
Specifications:
Dimensions : 3.937"x5.875"x0.625"
(100mmx150mmx18mm)
Weight : 320 g
Antenna Gain : 2db
Input Voltage : 11.1 to 12.6 V (from the Panel Bell output)
Current Draw : 100 mA at 12V (400 mA
during the GSM transmission)
Operating Environment : 5 º C to 40º C
(40º F to 104º F)
READ SCREEN
PASS MODULE AROUND
2-Way Wireless Security Suite

7. 2-Way Wireless Security Suite
TL260GS
TL260GS Internet and GSM/GPRS Dual-Path Alarm Communicator
Features:
Fully redundant Internet and GSM/GPRS dual-path alarm communication
Integrated call routing
Panel remote uploading/downloading support via GSM/GPRS and Internet
Individual Periodic Test Transmission via GSM/GPRS and Internet
Supervision heartbeats via GSM/GPRS and Internet
128-bit AES encryption via GSM/GPRS and Internet
Full event reporting
SIA format
PC-Link connection
SIM card included
Signal strength and trouble display
Activating and initializing through Connect 24
Quad-Band: 850 MHz, 1900 MHz, 900 MHz and 1800 MHz
READ SCREEN
PASS MODULE AROUND
2-Way Wireless Security Suite

8. 2-Way Wireless Security Suite
TL260GS
TL260GS Internet and GSM/GPRS Dual-Path Alarm Communicator
Compatible Control Panel:
Control panel: Power Series PC1864/1832/1616 version 4.1 and higher
Cabinet: PC5003C and PC4050C
Compatible Receivers:
Sur-Gard System I Receiver: version 1.10 and higher
Sur-Gard System II Receiver: version 2.00 and higher
Sur-Gard SG-DRL3-IP: version 2.20 and higher (for Sur-Gard System III Receiver)
Product Model and Accessories:
TL260GS-USA: For US market with AT&T SIM card
TL260GS-CDN: For Canada market with Roger SIM card
GS-15ANTQ: Antenna Extension Kits with 15 feet cable
GS-25ANTQ: Antenna Extension Kits with 25 feet cable
GS-50ANTQ: Antenna Extension Kits with 50 feet cable
READ SCREEN
PASS MODULE AROUND
2-Way Wireless Security Suite

9. 2-Way Wireless Security Suite
UL Approval List
GS2060 GSM/GPRS Wireless Alarm Communicator
TL260GS Internet and GSM/GPRS Dual-Path Alarm Communicator
UL Commercial Burglary
Listed as a primary communication channel (heartbeats must be enabled)
Listed as a back-up in conjunction with the POTS (daily test transmission)
Used as Dual Signaling Line Communication System (redundancy must be enabled)
Used as Standard Line Security and Encrypted Line Security System (heartbeats
and encryption must be enabled)
UL Residential Burglary and Fire
Listed as a primary communication channel (monthly test transmission)
Listed as a back-up in conjunction with the DACT (monthly test transmission)
2-Way Wireless Security Suite

10. 2-Way Wireless Security Suite
ULC Approval List
GS2060 GSM/GPRS Wireless Alarm Communicator
TL260GS Internet and GSM/GPRS Dual-Path Alarm Communicator
ULC Commercial Burglary and Fire
Listed as a passive communication module with Security Level P1, P2 and P3 (redundancy must be enabled)
Listed as a active communication module with Security Level A1-A4 (heartbeats and encryption must be enabled)
ULC Residential Burglary and Fire
Listed as a primary communication channel (daily test transmission)
Listed as a back-up in conjunction with the DACT (daily test transmission)
2-Way Wireless Security Suite

11. 2-Way Wireless Security Suite
UL/ULC Listed Installation – Commercial
Supervisory/Test Transmission Requirements
Applications
Communicator
Setup Mode
GS2060
TL260GS
Primary Channel
Backup Channel
UL Commercial Burglary
Primary
200 ms
Daily
Backup
Optional
ULC Commercial Fire
Active
180 ms
Passive
ULC Commercial Burglary
READ SCREEN
NOTE: Proper Supervisory/Test Transmission intervals could be pre-set with the profile in Connect 24 database for applicable installations.
2-Way Wireless Security Suite

12. 2-Way Wireless Security Suite
UL/ULC Listed Installation – Residential
Supervisory/Test Transmission – Requirements
Applications
Communicator
Setup Mode
GS2060
TL260GS
Primary Channel
Backup Channel
UL Residential Fire
Primary
Monthly
Backup
Optional
UL Residential Burglary
ULC Residential Fire
Active
Daily
Passive
ULC Residential Burglary
READ SCREEN
NOTE: Proper Supervisory/Test Transmission intervals could be pre-set with the profile in Connect 24 database for applicable installations.
2-Way Wireless Security Suite

13. GS2060/TL260GS – Installation and programming
2-Way Wireless Security Suite

14. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
BEFORE YOU BEGIN
Have the following ready before installation:
PC1864/1832/1616 Control panel with backup battery
Battery connection harness
PK5500 keypad with battery
Screwdriver
Prior to installing a GS2060 and TL260GS, contact your monitoring station to determine if it is a master reseller or visit and become an authorized dealer. In both instances, you will acquire a Profile Number, Installer ID Number and an Installer Password.
Please NOTE:
You need to activate the SIM card and initialize the communicator (step 1) 24 HOURS BEFORE INSTALLATION.
All options of the communicator only could be programmed through Connect 24
READ SCREEN
2-Way Wireless Security Suite

15. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Summary of Installation Steps
Step 1 – Initialize an account via Connect 24 Website (
Step 2 – Install and wire the communicator to the control panel (on-site)
Step 3 – Load the programming and test for best signal strength location
Step 4 – Program communication options on the control panel via keypad
Step 5 – Test communication
READ SCREEN
2-Way Wireless Security Suite

16. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 1 – Initialize an account via Connect 24 Website (
Login to Connect 24 website by using Installer ID and Password to initialize an account
Select Profile Number
Select Product Model
Enter SIM card number
Enter DNIS number (if necessary)
Enter Account Code
Select GPRS Periodic Test Transmission Interval (if necessary)
Select Supervisory Type (if necessary)
Enable DHCP (if necessary)
Enter IP Address (TL260GS only when the installation is static IP)
Enter Subnet Mask Address (TL260GS only when the installation is static IP)
Enter Gateway Address (TL260GS only when the installation is static IP)
Select Ethernet Periodic Test Transmission Interval (if necessary)
Select Rate Plan
Confirm information and submit activation application
NOTE: You still can remotely change these options later via Connect 24 website.
READ SCREEN
2-Way Wireless Security Suite

17. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 1 – 1
Select Profile Number
READ SCREEN
2-Way Wireless Security Suite

18. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 1 – 2
Select Module Number
READ SCREEN
2-Way Wireless Security Suite

19. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 1 – 3
Enter SIM Number
READ SCREEN
2-Way Wireless Security Suite

20. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 1 – 4
Enter DNIS number
Enter Account Code
Select Supervisory Type
Enable DHCP (if necessary)
READ SCREEN
2-Way Wireless Security Suite

21. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 1 – 5
Enter IP Address (TL260GS only)
Enter Subnet Mask Address (TL260GS only)
Enter Gateway Address (TL260GS only)
READ SCREEN
2-Way Wireless Security Suite

22. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 1 – 6
Select Plan Rate
READ SCREEN
2-Way Wireless Security Suite

23. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 2 – 1 Install and wire the communicator to the control panel (on-site)
Assemble the communicator with mounting bracket
READ SCREEN
2-Way Wireless Security Suite

24. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 2 – 2 Install and wire the communicator to the control panel (on-site)
Insert the communicator into the cabinet and assemble the antenna
READ SCREEN
2-Way Wireless Security Suite

25. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 2 – 3 Install and wire the communicator to the control panel (on-site)
Wire the communicator to control panel
NOTE: See details in product manual for PC1864/1832/1616 control panel
PCLINK Cable Connector
Control panel: Red wire is on the right and black is on the left
Communicator: Must be reversed (Black wire is on the right and red wire is on the left)
READ SCREEN
2-Way Wireless Security Suite

26. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 3 – Load the programming and test for best signal strength location
Ensure the SIM card is inserted
Power up the control panel
The communicator will be programmed by loading the pre-programmed configuration from Connect 24 automatically
Check Green LEDs. You must achieve full or medium signal strength. See details in product manual.
If signal strength is poor, must relocate the control panel or use an external extension antenna kits
READ SCREEN
2-Way Wireless Security Suite

27. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 4 – Program communication options on the control panel via keypad
GS2060/TL260GS with PC1864/1832/1616 control panel
o Sections [301], [302], [303]: Program Communication Path
• DCAA - Internal (Ethernet 1, Ethernet 2, GPRS 1,
GPRS 2)
o Section [350] : Program Communication Format (Communicator)
• (If Option [301] (above) is set to DCAA, Option [350] must be
set to SIA, sub-option 5)
o Sections [351] to [376] : Program Call Direction
o Section [382] : Enable T-LINK Interface (Option [5])
o Section [167] : Enable Communication Wait For ACK (Set to 60 seconds)
o Section [401] : Enable DLS Session Through GPRS or Ethernet (Option [1])
READ SCREEN
2-Way Wireless Security Suite

28. 2-Way Wireless Security Suite
Installation
GS2060/TL260GS Installation
Step 5 – Test communication
1. Disconnect incoming phone line from TIP and RING on the control panel
2. Verify that LED 2 is on, this indicate that the unit is active
3. Create an alarm transmission
4. Verify alarm transmission by calling monitoring station
5. Re-connect the phone line, if necessary
For back-up communication applications, perform steps 1 to 5
For primary communication applications, perform steps 3 and 4 only
READ SCREEN
2-Way Wireless Security Suite

29. 2-Way Wireless Security Suite
Installation
LED Display
Trouble Status LED (Yellow – first one from the left)
Please see details about the trouble shooting on page 17 in product manual
2-Way Wireless Security Suite

30. 2-Way Wireless Security Suite
Installation
LED Display
Network Connection Status LED (Red – second one from the left)
LED OFF
No network connection issue present
LED ON
Physical Ethernet cable is not connected
DHCP configuration fails
Fails to get an IP address from the GPRS network
GPRS connections has been reset
LED blinks quickly once
Ethernet transmitting
LDE blinks quickly twice
Ethernet receiving
2-Way Wireless Security Suite

31. 2-Way Wireless Security Suite
Installation
LED Display
Signal Strength LED 2 (Green – third one from the left)
Signal Strength LED 1 (Green – fourth one from the left)
Green LED 2 blinks quickly once
GPRS transmitting
Green LED 2 blinks quickly twice
GPRS receiving
2-Way Wireless Security Suite

32. 2-Way Wireless Security Suite
Installation
Keypad Trouble Display
Trouble Condition
General System Trouble
Panel Event Buffer Description
T-Link Network Fault/Restore includes
SIM Lock Trouble
GSM Trouble
Ethernet Trouble
Connect 24 Configuration Trouble
T-Link Receiver Trouble/Restore includes
Receiver Not Available Trouble
Receiver Supervison Trouble
FTC Trouble
T-Link Comm. Fault/Restore includes
Panel Absent Trouble
2-Way Wireless Security Suite

33. GS2060/TL260GS – Applications
2-Way Wireless Security Suite

34. 2-Way Wireless Security Suite
Applications
GS/IP Call Routing (Internal)
Communicator Controlled Call Routing
– Backup (dual-path)
– Redundant (dual-path)
Required Programming
Panel Sections [301], [302] and [305]
• Any of them could be programmed as DCAA
DCAA (default): Ethernet 1 → Ethernet 2 → GRPS 1 → GPRS 2
Communicator Sections [005]
Option [4] - Primary and backup path
[ON]: GPRS path primary, Ethernet path backup
[OFF]: Ethernet path primary, GPRS path backup
Option [5] - Redundant between GPRS path and Ethernet path
[OFF]: Disable redundancy
[ON]: Enable redundancy
NOTE: “Primary and Backup Path” and “Redundant Communication” options need to be configured during the initialization of the account via Connect 24.
READ SCREEN
2-Way Wireless Security Suite

35. 2-Way Wireless Security Suite
Applications
GS/IP Call Routing (Internal)
Backup Mode 1: Ethernet Primary, 4 Receivers
READ SCREEN
2-Way Wireless Security Suite

36. 2-Way Wireless Security Suite
Applications
GS/IP Call Routing (Internal)
Backup Mode 2: Ethernet Primary, 2 Receivers
READ SCREEN
2-Way Wireless Security Suite

37. 2-Way Wireless Security Suite
Applications
GS/IP Call Routing (Internal)
Backup Mode 3: GPRS Primary, 4 Receivers
READ SCREEN
2-Way Wireless Security Suite

38. 2-Way Wireless Security Suite
Applications
GS/IP Call Routing (Internal)
Backup Mode 4: GPRS Primary, 2 Receivers
READ SCREEN
2-Way Wireless Security Suite

39. 2-Way Wireless Security Suite
Applications
GS/IP Call Routing (Internal)
Redundant Mode: 4 Receivers
– (Redundancy between GSM/GPRS path and Ethernet/Internet path)
READ SCREEN
NOTE: The application requires 4 different SG receivers or SG-DLR3 IP line cards
2-Way Wireless Security Suite

40. 2-Way Wireless Security Suite
Applications
Other Applications
Periodic Test transmission
Individual periodic test via GPRS and Ethernet
Daily, Weekly and Monthly Interval
Configured during the initialization of the account via Connect 24
Encryption
128 Bit AES Encryption
Turned on by central monitoring station Sur-Gard receiver
Encrypted communications enabled after next event sent to the receiver
NOTE: Enabling this feature will require more data usage.
Read-only Options from Keypad
Read all the options of the communicator from LCD keypad
Control panel option [851]
READ SCREEN
2-Way Wireless Security Suite

41. 2-Way Wireless Security Suite
Applications
Other Applications
Power Save Mode
Extend the battery duration when an AC power loss on control panel
Ethernet functionality turned off until a new event need to be transmitted
Network Connections LED: OFF
Incoming DLS connection will not be possible
Hardware Default
Reset the programming options to the factory setting (default values)
NOTE: Please see details in product manual
Software Update
Update the firmware through DLS IV locally via PCLINK
Update the firmware through DLS IV remotely via Ethernet/Internet (TL260GS only)
READ SCREEN
2-Way Wireless Security Suite

42. 2-Way Wireless Security Suite
Applications
SIA Report Code
Event SIA Data Code SIA Address Field
Panel Absent Trouble ET
Panel Absent Trouble Restore ER
Radio Activation Restore RS
Ethernet 1 Test Transmission RP
GPRS 1 Test Transmission RP
GPRS 2 Test Transmission RP
FTC Restore YK
Example: Nri0 ET001
N= New Event
ri0=Partition/Area identifier
ET= Panel Absent Restore
001=Zone 001
NOTE: GPRS 2 Test Transmission will only be sent when two different APNs are programmed.
READ SCREEN
2-Way Wireless Security Suite