1. Chapter 11
Angular Momentum

2. Angular Momentum Angular momentum - Definition
Newton’s second law in angular form
- System of particles
- Rigid body
- Conservation

3. Angular momentum - Vector quantity: Units: kg m2/s Magnitude:
Direction: right hand rule.
L positive  counterclockwise
L negative  clockwise
Direction of L is always perpendicular to plane formed by r and p.

4. IV. Newton’s second law in angular form
Linear
Angular
Single particle
The vector sum of all torques acting on a particle is equal to the time rate of change of the angular momentum of that particle.
Proof:
V. Angular momentum
- System of particles:

5. Includes internal torques (due to forces between particles within system) and external torques (due to forces on the particles from bodies outside system).
Forces inside system  third law force pairs  torqueint sum =0  The only torques that can change the angular momentum of a system are the external torques acting on a system.
The net external torque acting on a system of particles is equal to the time rate of change of the system’s total angular momentum L.

6. The Vector Product and Torque
The torque vector lies in a direction perpendicular to the plane formed by the position vector and the force vector
The torque is the vector (or cross) product of the position vector and the force vector

7. Torque Vector Example Given the force and location
Find the torque produced

8. Torque Vector Example Given the force and location
Find the torque produced

9. Angular Momentum
The instantaneous angular momentum of a particle relative to the origin O is defined as the cross product of the particle’s instantaneous position vector and its instantaneous linear
momentum

10. Torque and Angular Momentum
The torque is related to the angular momentum
Similar to the way force is related to linear momentum
The torque acting on a particle is equal to the time rate of change of the particle’s angular momentum
This is the rotational analog of Newton’s Second Law
must be measured about the same origin

11. Angular Momentum The SI units of angular momentum are (kg.m2)/ s
Both the magnitude and direction of the angular momentum depend on the choice of origin
The magnitude is L = mvr sinf
f is the angle between and
The direction of is perpendicular to the plane formed by and

12. Angular Momentum of a Particle, Example
The vector is pointed out of the diagram
The magnitude is
L = mvr sin 90o = mvr
sin 90o is used since v is perpendicular to r
A particle in uniform circular motion has a constant angular momentum about an axis through the center of its path

13. Angular Momentum of a System of Particles
The total angular momentum of a system of particles is defined as the vector sum of the angular momenta of the individual particles
Differentiating with respect to time

14. Angular Momentum of a System of Particles
Any torques associated with the internal forces acting in a system of particles are zero
Therefore,
The net external torque acting on a system about some axis passing through an origin in an inertial frame equals the time rate of change of the total angular momentum of the system about that origin

15. Angular Momentum of a System of Particles
The resultant torque acting on a system about an axis through the center of mass equals the time rate of change of angular momentum of the system regardless of the motion of the center of mass
This applies even if the center of mass is accelerating, provided are evaluated relative to the center of mass

16. System of Objects
The masses are connected by a light cord that passes over a pulley; find the linear acceleration
The sphere falls, the pulley rotates and the block slides
Use angular momentum approach
Find an expressions for the linear acceleration

17. Angular Momentum of a Rotating Rigid Object
Each particle of the object rotates in the xy plane about the z axis with an angular speed of w
The angular momentum of an individual particle is Li = mi ri2 w
and are directed along the z axis

18. Angular Momentum of a Rotating Rigid Object
To find the angular momentum of the entire object, add the angular momenta of all the individual particles
This also gives the rotational form of Newton’s Second Law

19. Angular Momentum of a Rotating Rigid Object
The rotational form of Newton’s Second Law is also valid for a rigid object rotating about a moving axis provided the moving axis:
(1) passes through the center of mass
(2) is a symmetry axis
If a symmetrical object rotates about a fixed axis passing through its center of mass, the vector form holds:
where is the total angular momentum measured with respect to the axis of rotation

20. Angular Momentum of a Bowling Ball
The momentum of inertia of the ball is 2/5MR 2
The angular momentum of the ball is Lz = Iw
The direction of the angular momentum is in the positive z direction

21. Conservation of Angular Momentum
The total angular momentum of a system is constant in both magnitude and direction if the resultant external torque acting on the system is zero
Net torque = 0 -> means that the system is isolated
For a system of particles,

22. Conservation of Angular Momentum
If the mass of an isolated system undergoes redistribution, the moment of inertia changes
The conservation of angular momentum requires a compensating change in the angular velocity
Ii wi = If wf = constant
This holds for rotation about a fixed axis and for rotation about an axis through the center of mass of a moving system
The net torque must be zero in any case

23. Conservation Law Summary
For an isolated system -
(1) Conservation of Energy:
Ei = Ef
(2) Conservation of Linear Momentum:
(3) Conservation of Angular Momentum:

24. A solid cylinder of radius 15 cm and mass 3
A solid cylinder of radius 15 cm and mass 3.0 kg rolls without slipping at a constant speed of 1.6 m/s. (a) What is its angular momentum about its symmetry axis? (b) What is its rotational kinetic energy? (c) What is its total kinetic energy?
( I cylinder= )

25. A light rigid rod 1. 00 m in length joins two particles, with masses 4
A light rigid rod 1.00 m in length joins two particles, with masses 4.00 kg and 3.00 kg, at its ends. The combination rotates in the xy plane about a pivot through the center of the rod. Determine the angular momentum of the system about the origin when the speed of each particle is 5.00 m/s.

26. A 4.00 kg counterweight is attached to a light cord, which is wound around a spool. The spool is a uniform solid cylinder of radius 8.00 cm and mass 2.00 kg. (a) What is the net
torque on the system? (b) What
is the angular momentum function?
(c) What is the acceleration
of the counterweight?

27. A ball having mass m is fastened at the end of a flagpole connected to the side of a tall building at point P, shown in the figure. The length of the flagpole is ℓ, and θ is the angle the flagpole makes with the horizontal. The ball becomes loose and starts to fall with acceleration –g .
(a) Determine the angular momentum (as a function of time) of the ball about point P. Neglect air resistance. (b) For what physical reason does the angular momentum change?
(c) What, if any, is its rate of change?

28. A wooden block of mass M resting on a frictionless, horizontal surface is attached to a rigid rod of length ℓ and of negligible mass. The rod is pivoted at the other end. A bullet of mass m traveling parallel to the horizontal surface and perpendicular to the rod with speed v hits the block and becomes embedded in it.

29. A conical pendulum consists of a bob of mass m in motion in a circular path in a horizontal plane as shown. During the motion, the supporting wire of length ℓ maintains the constant angle with the vertical. Show that the magnitude of the angular momentum of the bob about the center of the circle is

30. The position vector of a particle of mass 2
The position vector of a particle of mass 2.00 kg is given as a function of time by Determine the angular momentum of the particle about the origin, as a function of time.

31. A particle of mass m is shot with an initial velocity vi making an angle with the horizontal as shown. The particle moves in the gravitational field of the Earth. Find the angular momentum of the particle about the origin when the particle is (a) at the origin, (b) at the highest point of its trajectory, and (c) just before it hits the ground. (d) What torque causes its angular momentum to change?

32. A wad of sticky clay with mass m and velocity vi is fired at a solid cylinder of mass M and radius R. The cylinder is initially at rest, and is mounted on a fixed horizontal axle that runs through its center of mass. The line of motion of the projectile is perpendicular to the axle and at a distance d < R from the center. (a) Find the angular speed of the system just after the clay strikes and sticks to the surface of the cylinder. (b) Is mechanical energy of the clay-cylinder system conserved in this process? Explain your answer.

33. Two astronauts, each having a mass of 75. 0 kg, are connected by a 10
Two astronauts, each having a mass of 75.0 kg, are connected by a 10.0-m rope of negligible mass. They are isolated in space, orbiting their center of mass at speeds of 5.00 m/s. Treating the astronauts as particles, calculate (a) the magnitude of the angular momentum of the system and (b) the rotational energy of the system. By pulling on the rope, one of the astronauts shortens the distance between them to 5.00 m. (c) What is the new angular momentum of the system? (d) What are the astronauts’ new speeds? (e) What is the new rotational energy of the system? (f) How much work does the astronaut do in shortening the rope?

34. A uniform solid disk is set into rotation with an angular speed ωi about an axis through its center. While still rotating at this speed, the disk is placed into contact with a horizontal surface and released as in Figure. (a) What is the angular speed of the disk once pure rolling takes place? (b) Find the fractional loss in kinetic energy from the time the disk is released until pure rolling occurs. (Hint: Consider torques about the center of mass.)

35. Conservation of Angular Momentum: The Merry-Go-Round
The moment of inertia of the system is the moment of inertia of the platform plus the moment of inertia of the person
Assume the person can be treated as a particle
As the person moves toward the center of the rotating platform, the angular speed will increase
To keep the angular momentum constant