1. DENSO Denso Manufacturing Michigan Inc. Production Control Supplier Manual Section Packaging Title Expendable Packaging Requirements Control No. PKG-004 Purpose: * Standards: Date Issued : 3-23-99Date Revised : 10/08/14 To define DMMI’s expendable packaging requirements. (A)Container Requirements Box style must be Half Slotted Container (HSC) with lid. Suppliers must insure boxes will remained stacked during shipment. If corner post will help with this please consider using. No printing or designs are allowed on the box. There are three exceptions that MAY be printed on the bottom of the box: 1. The suppliers name 2. A small font part number, for inventory purposes. 3. Packaging supplier certification stamp. Regular slotted (RSC) and HSC Flanged containers are not acceptable. (1) G:PRD_CTRL/SUPPLIER MANUAL UPDATES 2009/SUPPLIER MANUAL UPDATES 2011/ Expendable Packaging Requirements Acceptable Example HSC with 2” flange HSC with lid Not Acceptable (unless approved) RSC Lid outside dimension should match tote outside dimension.

2. DENSO Denso Manufacturing Michigan Inc. Production Control Supplier Manual Section Packaging Date Issued : 3-23-99Date Revised : 10/08/14 Title Expendable Packaging Requirements Control No. PKG-004 (2) G:PRD_CTRL/SUPPLIER MANUAL UPDATES 2009/SUPPLIER MANUAL UPDATES 2011/ Expendable Packaging Requirements Acceptable Boxes Boxes must be designed to stack a minimum of 96” in the truck and 192” in warehouse storage. Box with lid must mirror the same outside dimensions as the returnable container if the mass packaging is a returnable system. The lid should match outside dimension to prevent full layer of boxes from overhanging pallet. Corrugated layer pads are required when using boxes smaller than 24” x 15”. This adds stability to the pallet. Container weight cannot exceed 30 pounds when full. Part orientation should mirror the returnable container’s orientation if there is one. Hand held boxes and lids must not have staples as part of the construction method. (B) Wood Pallet Requirements DMMI’s standard wood pallet size is 48” x 45”. The supplier is expected to propose this size when submitting new expendable packaging specifications. (see drawing on page three) Pallet material must be adequate for weight of product. Using guidelines below: Light Products 1 to 599 lbs. Softwood Heavy products 600 lbs. and over Hardwood Softwood 48” x 45” pallets, for import, must be “heat” treated and identified. Wing style and block style pallets are not acceptable. Striping is required on the middle stringer to identify the size of the pallet (see drawing on page 3). Reconditioned pallets may be used but, broken stringers, rotten wood and bark on the pallets are not acceptable. No exposed fasteners are allowed.

3. DENSO Denso Manufacturing Michigan Inc. Production Control Supplier Manual Section Packaging Date Issued : 3-23-99Date Revised : 10/08/14 Title Expendable Packaging Requirements Control No. PKG-004 (3) G:PRD_CTRL/SUPPLIER MANUAL UPDATES 2009/SUPPLIER MANUAL UPDATES 2011/ Expendable Packaging Requirements End of Procedure 45” 3” min. 48” 5” Blue Stripe 48” x 45” Pallet Specification Material: Reference weight guide (softwood vs. hardwood) Dimensions: 48” x 45” x 5” Deck boards: 8 top, 4 bottom Joint Style: Nails, 2 per deck board / stringer Pallet Style: 4 way entry Print Style: Stripe Print Color: Blue, pantone # 072C or stenciled 48” x 45” Print Location: Center stringer Top View Bottom View End View * Denotes change