1. Marc Baarmand Total of 8 Calibration Boxes (CBOX) for HF  CBOX contains Small blue scintillator (UV → blue) 1×9 Splitter (each CBOX serves 9 PMT RO Boxes) 2 blue LEDs – pulsed by LED driver 3 PINs – use 5V off backplane to power!  CBOX should also contain – preferred packaging QIE card to read out 3 PINs – only 3 QIE channels per CBOX! LED driver – need >5V to allow larger dynamic range!  CBOX space in HF crate One CBOX per HF rack Need 5 (minimum 4) slots in a HF crate HF crate may need additional voltage(s) depending on LED driver! HF Laser / LED Calibration

2. Marc Baarmand 2 HF wedges tested at a time – read out through the same 4 ROBOXs  HF laser/LED calibration setup UV laser + neutral density filters 1×4 Splitter + various fibers 1 CBOX  1 QIE card and 1 LED driver 4 CLIs HF crate – read out QIE and power PINs and LED driver  Issues QIE card/software ready? LED driver ready? Its features, e.g. variable pulse to allow single PE calibration? Need to know the schedule ASAP HF laser / LED Calibration @ 2004 Beam Test

3. Marc Baarmand HF Laser / LED Calibration single PE calibration – 2003 beam test

4. Marc Baarmand N 2 Laser 300  QQ 150m HF  HF + 9 PMT Boxes 9 600  QP Calib Box 1  4 Counting Room HF Calibration Optical Fiber Path 9 PMT Boxes / Quad 24 PMT Tubes / Box 216 PMTs / Quad 864 PMTs / End 1728 PMTs Total 300  J 337 nm Bottom Rack Calib Box Top Rack Calib Box Calib Box Bottom Rack Top Rack 9 9 9 600  QP 300  QQ