1. 2008 “Generating value through knowledge” Engineering and Industrial Development Centre

2. 2008 R&D AND SPECIALIZED SERVICES ON COMPOSITE STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY  Composite material specimen preparation. Hand lay up with prepreg. Preparation in autoclave and hot plates compression press. (laminates of fiber reinforced composite materials with polymeric matrix, different fiber orientation).  Determination of mechanical properties; complete characterization considering the material anisotropy. Tension, compression, bending testing at temperatures -129 a 540°C.  Fatigue and fracture analysis of composite materials: High cycle fatigue, low cycle fatigue, fracture toughness, Poisson modulus, interlaminar shear, dynamic testing.  Nondestructive testing of composite materials, using ultrasonic with phase arrays, immersion ultrasonic, “C” scan, Lamb waves, acoustic emission, radiography, infrared thermography.  Failure analysis of composite materials using optical microscopy and scanning electron microscopy.  Noise and vibration analysis. Autoclave, Econoclave 2×4, ASC Process Systems Manual Hydraulic Compression Press, Q-230H, PHI Mechanical Testing System MTS-810 SEM Instron 8872 ACTUAL CAPACITIES

3. 2008  ASTM D 3529/D 3529M – 97 (Reapproved 2008) Standard test method for matrix solids content and matrix content of composite prepreg.  ASTM D 3530/D 3530M – 97 (Reapproved 2008) Standard test method for volatiles content of composite material prepreg.  ASTM D 3531 – 99 (Reapproved 2004) Standard test method for resin flow of carbon fiber-epoxy prepreg.  ASTM D 3532 – 99 (Reapproved 2004) Standard test method for gel time of carbon fiber-epoxy prepreg. ACTUAL CAPACITIES R&D AND SPECIALIZED SERVICES ON COMPOSITE STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY BODE 100 - PC Controlled vector network analyzer OMNISCAN MX PA, OLYMPUS Ultrasonic immersion system Hopkinson bar Noise and vibration analysis Infrared thermography

4. 2008  MECHATRONICS FOR INDUSTRY. Turnkey automation solutions: Assembly & automated manipulation; Machinery for special testing  ASSEMBLY. Design and integration of solutions in: Automated transport & transfer systems; Handling & integration of robots; Positioning & indexing systems. Insertion, clamping, riveting & other assembly operations.  MACHINING. Machining Solutions: Automated drilling systems; Automated regrinding systems; Other machining operations.  TESTING. Design of special machines for inspection testing: Machines for inspection in industrial laboratories; Machines for automated testing; Machines for the inspection and operations of in-line testing; Optical machines.  AUTOMATION SIMULATION AND MACHINERY ANALYSIS. FEM & dynamic analysis; Production line simulations & human factors.  APPLIED ELECTRONICS. Integrated systems in industrial inspection for: Product quality checking, detection of defects; Barcode inspection in 1d & 2d; Assembly verification; Inspection of dimensions. ACTUAL CAPACITIES R&D AND SPECIALIZED SERVICES ON METALLIC STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY

5. 2008 ADVANCED MANUFACTURING  Product Design: Design and development of structural components for manufacturing processes and assembly with DELMIA-CATIA (Robotics simulations & work cells design)  Modeling and simulation  Plastic and other materials prototype manufacturing  Rapid prototyping by stereolitography  High speed and high precision machining  Die and tooling manufacturing  Manufacturing processes development  Optimization of operations sequence, production logistics and production diagnostic systems. (Aluminum, Stainless Steel, Alloy Steels, Titanium, Engineering plastics) ACTUAL CAPACITIES R&D AND SPECIALIZED SERVICES ON METALLIC STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY

6. 2008 NDT NON DESTRUCTIVE INSPECTION (MM-063-006/08)  Radiography (RT) Testing  Ultrasonic Testing  Magnetic Particle Testing  Leak Testing  Eddy Current Testing  Visual testing  Fluorescent penetrant examination in aerospace components ACTUAL CAPACITIES Certified Personnel ASNT LEVEL III AND NAS 410

7. 2008 Acredited on ISO-IEC-17025-2005 (NMX-EC-17025-IMNC-2006)  Metallography and Failure Analysis (MM-0031-006/08)  Chemical Analysis (Q-093-073/09 ema)  Mechanical Testing (MM-065-006/08) OTHER METALLURGICAL SERVICES ACTUAL CAPACITIES

8. 2008  Management of metrological confirmation programs of measuring equipment.  Installation and set up at operation of calibration laboratories.  Specialized training in Metrology (Courses and Diplomas).  Specializes Consulting in measurement assurance with the MESURA program ® by CENAM and technological institutions.  Development of models and software for estimating uncertainties in measurement processes.  Development and manufacture of measurement equipment. ACTUAL CAPACITIES METROLOGY SERVICES

9. 2008 METROLOGY SERVICES Accreditation NMX-EC-17025-IMNC-2006 Certification NMX-CC-9001-IMNC-2000 Calibration and Measurements:  Dimensional Qro. (D-39 ema), S.L.P. (D-102 ema), G.M. Silao (D-108 ema)  Mass (M-31 ema)  Density (DEN-06 ema)  Volume (V-19 ema)  Flow (FL-14 ema)  Pressure (P-58 ema)  Temperature (T-24 ema)  Humidity (H-09 ema)  Torsional torque, S.L.P. (PT-19 ema) CANHEFERN  Electric (E-85 ema)  Time & Frecuency (TF-14 ema) MIDE  Gas Flow (FL-016 ema) ACTUAL CAPACITIES

10. 2008 POTENTIAL CAPACITIES ON R&D AND SPECIALIZED SERVICES (no equipments available)  Flammability analysis  Permeability and water absorption analysis  Porosity analysis  Effect of humidity in composite materials  Electrical discharge reception in composite materials  Inspection by shearography  Environmental conditioning  High velocity impact testing  Other validation tests, according with special client requirements POTENTIAL CAPACITIES

11. 2008 “Generating value through knowledge” PROJECTS OF INTERESTCOORDINATOR 7.1.1. THE GREENING OF AIR TRANSPORT 7.1.1.1. Green aircraft ATT 2010.1.1-2 Aerostructures Dr. Carlos Rubio González Dr. Ulises Sánchez Santana 7.1.3. ENSURING CUSTOMER SATISFACTION AND SAFETY 7.1.3.3. Aircraft safety ATT 2010.3.3-1 Aerostructures Dr. Carlos Rubio González Dr. Ulises Sánchez Santana 7.1.4. IMPROVING COST EFFICIENCY 7.1.4.1. Aircraft development cost ATT 2010.4.1-1 Design Systems and Tools Dr. Hugo Gámez Cuatzin Dr. Hugo Jiménez Hernández M.C. Antonio Ramírez Martínez ATT 2010.4.1-2 Aerostructures Dr. Carlos Rubio González Dr. Ulises Sánchez Santana 7.1.4.2. Aircraft operational cost ATT 2010.4.2-4 Systems Dr. Manuel Bandala Sánchez Dr. Luis del Llano Vizcaya 7.1.6. PIONEERING THE AIR TRANSPORT OF THE FUTURE 7.1.6.1. Breakthrough and emerging technologies ATT 2010.6.1-4 Life-cycle Dr. Luis García Valdovinos Dr. Luis del Llano Vizcaya M.C. Julio César Solano Vargas 7.1.6.2. Step changes in air transportation ATT 2010.6.2-2 Guidance and controlDr. Luis García Valdovinos Dr. Hugo Jiménez Hernández IDENTIFIED COLLABORATION OPPORTUNITIES CoopAIR - CIDESI

12. 2008 “Generating value through knowledge” Tank you very much Engineering and Industrial Development Centre