1. Autoclave Machine

2. Autoclave Machine
An autoclave is a device used to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C for around 20 minutes.
In our lab, we use the autoclave machine to clean the pipette tips.
It is also used to sterilize the water that is filled in to the water tray of CO2 Incubator.

3. Settings Power Button Pressure Gauge Control Panel
Open the lid of machine and add 2 L DI water for every cycle. Close the lid tightly after keeping samples.
To turn on Autoclave machine, firstly engage the Power Button
Then press ‘Start’ until start light is on.
Temperature will start increasing up to the set value and time.
Time and Temperature can be set by pressing ‘Mode’ and then changing the values using ‘right’, ‘left’ and ‘up’ arrow buttons.
Open the lid after display panel shows temperature below 25°C.
Power Button
Pressure Gauge
Control Panel

4. Specifications MODEL HST-506-4 Chamber Size ¢ 300x630mm Capacity
45 Liter
  Type
Full Automatic System
  Chamber Type
Round-Vertical Type
  Temp. controller
Digital P.I.D Controller (Auto Tuning)
  Temp. Range
Ambient to 132'C
  Operating Pressure
1.2Kg/cm2 -121'C
  Timer
99min. Digital Timer
  Door
One Touch Type (Single Screw Door)
  Pressure Gauge
Mechanical Type 0-3Kg/cm2
  Air Exhaust
Adjustable Handle Valve
  Safety Device
Over Heat Protector, Over Pressure Protector, Alarm
  Basket
Standard Type 2EA
  Power(AC 220V, 60HZ)
2.5KW