Presentation is loading. Please wait.

Presentation is loading. Please wait.

Energy Transfers Using a calorimeter Worked example: A fuel heated 40g of water which started at temperature of 20 degrees Celsius and finished at a temperature.

Published byDylan Hall Modified over 9 years ago

Similar presentations

Presentation on theme: "Energy Transfers Using a calorimeter Worked example: A fuel heated 40g of water which started at temperature of 20 degrees Celsius and finished at a temperature."— Presentation transcript:

1 Energy Transfers Using a calorimeter Worked example: A fuel heated 40g of water which started at temperature of 20 degrees Celsius and finished at a temperature of 39 degrees. The fuel before burning had a mass of 23.6g but now has a mass of 23.5g. The fuel has a formula mass of 28. You can work out four things: Energy released by fuel in Joules Energy released by fuel in kilojoules Energy released by fuel in Kilojoules/gram Energy released by fuel in Kilojoules/mol

2 Your go: A fuel heated 50g of water which started at temperature of 16 degrees Celsius and finished at a temperature of 41 degrees. The fuel before burning had a mass of 25.8g but now has a mass of 25.6g. The fuel has a formula mass of 46. Work out the energy released in joules, kilojoules, kilojoules/gram and kilojoules/mol.

3 Energy Level Diagrams

4 An ______________________ can be used to show how the energy stored in chemicals changes during a chemical reaction. In ______________ reactions the products have more energy than the ___________. In exothermic reactions the ____________ have less energy than the __________. A catalyst __________ the __________ energy. It does this by providing __________________________ ________. A catalyst is not ________________________. energy level diagram endothermic reactants products reactants lowers Copy and complete: activation an alternate route for the reaction. used up during the reaction.

5 3.4 Bond Energies Objective: to explain how the balance of energy changes when bonds are broken or made, and how this affects the overall energy change of a reaction Outcomes: All: I can state what happens to energy when bonds are made and broken (D/E) Most: I can assign bond energies to an energy level diagram (C) Some: I can calculate the energy transferred in reactions using supplied bond energies (A/B) Keywords: energy level diagram, exothermic, endothermic, bond energy Homework: Revise for test on 3.1, 3.2 and 3.3 Due: Thursday 21 March

6 bond breaking = energy IN bond making = energy OUT ENDOTHERMIC EXOTHERMIC I can state what happens to energy when bonds are made and broken (D/E)

7 Each bond has a different bond energy. The amount of energy it takes to make OR break it. A H-H bond has a bond energy of 436kJ/mol Data on bond energies can be used to calculate the TOTAL energy of a reaction. This is the difference between the energy put in when bonds are made and the energy given out when bonds are broken.

8 CH 4 (g) + 2O 2 (g)CO 2 (g) +2H 2 O(l) Work out the bond energies for: a) the reactant molecules b) the product molecules Hence c) workout the overall energy change 804

9

10 I can assign bond energies to an energy level diagram (C) ____________ ________ _____ Add labels and energy values to the energy level diagram for the reaction. CH 4 (g) + 2O 2 (g)CO 2 (g) +2H 2 O(l)

11

12

13 Fuel Issues

14 Briefly Summarise: Why Hydrogen fuel cells are less harmful to the environment than another example fuel (3).

15 3.4 Bond Energies Objective: to explain how the balance of energy changes when bonds are broken or made, and how this affects the overall energy change of a reaction Outcomes: I can state what happens to energy when bonds are made and broken (D/E) I can assign bond energies to an energy level diagram (C) I can calculate the energy transferred in reactions using supplied bond energies (A/B) Keywords: energy level diagram, exothermic, endothermic, bond energy Homework: Revise for test on 3.1, 3.2 and 3.3 Due: Thursday 21 March

16 Example 1 BOND ENERGY (kJ/mol) C-H 413 O=O 498 C-C 347 C=O 732 O-H 464 a) Complete the balanced symbol equation. b) Draw the structural formula. c) Calculate the energy in for the reactant bonds being broken. d) Calculate the energy out for the product bonds being made. e) Work out the overall change in energy Ethanol + Oxygen Water + Carbon Dioxide

17 Example 2 BOND ENERGY (kJ/mol) C-H 413 O=O 498 C-C 347 C=O 732 O-H 464 a) Complete the balanced symbol equation. b) Draw the structural formula. c) Calculate the energy in for the reactant bonds being broken. d) Calculate the energy out for the product bonds being made. e) Work out the overall change in energy Propane + Oxygen Water + Carbon Dioxide

18 Example 3 BOND ENERGY (kJ/mol) H-H 436 N-H 391 N ≡ N 945 a) Complete the balanced symbol equation. b) Draw the structural formula. c) Calculate the energy in for the reactant bonds being broken. d) Calculate the energy out for the product bonds being made. e) Work out the overall change in energy Hydrogen + Nitrogen Ammonia

19 Example 4 BOND ENERGY (kJ/mol) O=O 498 H-H 436 O-H 464 a) Complete the balanced symbol equation. b) Draw the structural formula. c) Calculate the energy in for the reactant bonds being broken. d) Calculate the energy out for the product bonds being made. e) Work out the overall change in energy Hydrogen + Oxygen Water

20 CHM2 Jan 2009 Example 5 – A/S level question

21

Download ppt "Energy Transfers Using a calorimeter Worked example: A fuel heated 40g of water which started at temperature of 20 degrees Celsius and finished at a temperature."

Similar presentations

The Basics Balancing Equations. The Reaction Burning METHANE or any hydrocarbon gives WATER and CARBON DIOXIDE Burning METHANE or any hydrocarbon gives.

The Basics Balancing Equations. The Reaction Burning METHANE or any hydrocarbon gives WATER and CARBON DIOXIDE Burning METHANE or any hydrocarbon gives.
Page 34 In a chemical reaction, bonds in the reactants are broken and the atoms rearrange to form new bonds in the products. Flames or heat associated.

Page 34 In a chemical reaction, bonds in the reactants are broken and the atoms rearrange to form new bonds in the products. Flames or heat associated.
Bond Enthalpies Section 5.4. Introduction More Good Stuff For H 2 the thermochemical equation describing the bond enthalpy is: H 2(g) → 2H (g) ∆H θ =

Bond Enthalpies Section 5.4. Introduction More Good Stuff For H 2 the thermochemical equation describing the bond enthalpy is: H 2(g) → 2H (g) ∆H θ =
Unit 2, Module 3, Energy Bond Enthalpies Thursday, 02 July 2015.

Unit 2, Module 3, Energy Bond Enthalpies Thursday, 02 July 2015.
Endothermic And Exothermic Reactions. Chemical bonds and Energy Chemical energy is the energy stored in the chemical bonds of a substance. Energy changes.

Endothermic And Exothermic Reactions. Chemical bonds and Energy Chemical energy is the energy stored in the chemical bonds of a substance. Energy changes.
Endothermic and exothermic reactions

Endothermic and exothermic reactions
Learning objective: To explain why there are energy changes during a reaction. Must: Be able to identify exothermic and endothermic reactions. Must: Be.

Learning objective: To explain why there are energy changes during a reaction. Must: Be able to identify exothermic and endothermic reactions. Must: Be.
Do now! Can you stick the slides in your book please (cut round the edges, but don’t cut out each individual slide – it takes too long!).

Do now! Can you stick the slides in your book please (cut round the edges, but don’t cut out each individual slide – it takes too long!).
Energy and Reactions Breaking of bonds requires an input of energy. The formation of bonds requires a release of energy. The total energy that exists before.

Energy and Reactions Breaking of bonds requires an input of energy. The formation of bonds requires a release of energy. The total energy that exists before.
Chemical Reactions and Equations CLASS NOTES. Review from last class What types of changes can occur as a result of chemical reactions? – Can you give.

Chemical Reactions and Equations CLASS NOTES. Review from last class What types of changes can occur as a result of chemical reactions? – Can you give.
Energy Changes You will learn about:  Exothermic & Endothermic Reactions  Energy level diagrams  Bond Making and Breaking  Calculating enthalpy change.

Energy Changes You will learn about:  Exothermic & Endothermic Reactions  Energy level diagrams  Bond Making and Breaking  Calculating enthalpy change.
Chemical Reactions.  Atoms interact in chemical reactions: Chemical reaction: produces new substances by changing the way in which atoms are arranged.

Chemical Reactions.  Atoms interact in chemical reactions: Chemical reaction: produces new substances by changing the way in which atoms are arranged.
Bond Energies Non-metal elements combine to form molecules by sharing pairs of electrons in covalent bonds. bond energy. Every covalent bond requires.

Bond Energies Non-metal elements combine to form molecules by sharing pairs of electrons in covalent bonds. bond energy. Every covalent bond requires.
Unit 6 – Chemical Reactions and Equations Evidence of a Chemical Reaction Chemical Equations Balancing Chemical Equations 1.

Unit 6 – Chemical Reactions and Equations Evidence of a Chemical Reaction Chemical Equations Balancing Chemical Equations 1.
Chemical Reactions Chapter 2: Section 2.4.

Chemical Reactions Chapter 2: Section 2.4.
OCR_CD2_Endo and Exo reactions Chemical Applications Assignment 3 Endothermic and exothermic reactions.

OCR_CD2_Endo and Exo reactions Chemical Applications Assignment 3 Endothermic and exothermic reactions.
Energy Changes & Reactions Unit 7 - Chapter 7.3. Chemical Bonds and Energy  Chemical reactions:  Breaking chemical bonds in the reactants  Forming.

Energy Changes & Reactions Unit 7 - Chapter 7.3. Chemical Bonds and Energy  Chemical reactions:  Breaking chemical bonds in the reactants  Forming.
Energetics HL and SL An exothermic reaction releases heat energy. An endothermic reaction takes in heat energy. During a chemical reaction bonds in the.

Energetics HL and SL An exothermic reaction releases heat energy. An endothermic reaction takes in heat energy. During a chemical reaction bonds in the.
Energy from Fuels To know how energy from fuels can be measured. (Grade C) To calculate the energy content of a fuel. (Grade B) To explain how to measure.

Energy from Fuels To know how energy from fuels can be measured. (Grade C) To calculate the energy content of a fuel. (Grade B) To explain how to measure.
CO2 Carbon Dioxide is the chemical most involved in global warming. It requires a large amount of energy to break the bonds. The sun’s rays vibrate the.

CO2 Carbon Dioxide is the chemical most involved in global warming. It requires a large amount of energy to break the bonds. The sun’s rays vibrate the.

Similar presentations

Ads by Google