Download presentation
Presentation is loading. Please wait.
Published byRonald Gibbs Modified over 9 years ago
1
Most Frequently Cited Serious Violations Construction – FY 2011 OSHA Federal Standards October 1, 2010 – September 30, 2011
2
Number of Serious Violations - FY 2011 2 Most Frequently Cited Serious Violations in Construction Aerial Lifts - Body belt and lanyard Head protection Portable ladders 3 feet above landing surface Eye & face protection Fall hazards training program Scaffolds - Fall protection Fall protection - Unprotected sides & edges Fall protection – Residential construction 6’ or more Scaffolds - Platform construction Scaffolds - Access Standard & Subpart - 1926. Note: The charts do not include information entered into the new OSHA Information System (OIS).
3
Number of Serious Violations - FY 2011 3 Subpart C - General Safety & Health (1926.20 - 35) Employee training programs Inspections by competent person Initiate and maintain accident prevention programs Personal protective equipment – Employer responsibility Housekeeping
4
Number of Serious Violations - FY 2011 4 Subpart D - Occupational Health & Environmental Controls (1926.50 - 66) Emergency eyewash/shower Lead - Exposure assessment Exposure to air contaminants Lead – Interim protective clothing/equipment Lead – Interim respiratory protection Lead – Representative personal sampling
5
Number of Serious Violations - FY 2011 5 Subpart E - Personal Protective & Life Saving Equipment (1926.95 - 107) Head protection Required eye & face protection – ANSI requirements PPE - Provided, used & maintained Eye & face protection Life jackets/vests
6
Number of Serious Violations - FY 2011 6 Subpart F - Fire Protection & Prevention (1926.150 - 159) Extinguishers within 50 ft. of flammables/combustibles 2A fire extinguishers - Building area Flammable/combustible liquids – Dispensing units protected Service and refueling areas – No Smoking signs LP Gas – Protection from vehicle damage
7
Number of Serious Violations - FY 2011 7 Subpart G - Signs, Signals & Barricades (1926.200 - 203) Traffic control signs/devices - Requirements Flaggers – Signaling by & use of Traffic signs at points of hazard
8
Number of Serious Violations - FY 2011 8 Subpart H - Materials Handling, Storage, Use & Disposal (1926.250 - 252) Rigging equipment inspection & removal from service Welded alloy steel chain slings - Identification Slings, fastenings & attachments - Inspections Exterior drop chutes Synthetic web slings - Removal from service
9
Number of Serious Violations - FY 2011 9 Subpart I - Tools: Hand & Power (1926.300 - 307) Woodworking tools - ANSI requirements Guarding of rotating/moving parts Tools designed for guards - Guards in place Guarding of ripsaws Guarding of portable circular saws
10
Number of Serious Violations - FY 2011 10 Subpart J - Welding & Cutting (1926.350 -354) Cylinders secured upright Oxygen cylinder storage Cables needing repair Fire extinguishing equipment in area Use of device to keep cylinders steady while in use
11
Number of Serious Violations - FY 2011 11 Subpart K - Electrical (1926.400 - 449) Ground fault protection Grounding path Equipment installation & use Worn/frayed cords or cables Flexible cords – Strain relief
12
Number of Serious Violations - FY 2011 12 Subpart L - Scaffolds (1926.450 - 454) Scaffolds above 10 ft. - Fall protection Scaffold access Scaffold platform construction Aerial lifts - Body belt & lanyard Training for employees using scaffolds
13
Number of Serious Violations - FY 2011 13 Subpart M - Fall Protection (1926.500 - 503) Fall protection - Residential construction 6’ or more Fall hazards training program Fall protection - Unprotected sides & edges Fall protection - Roofing work on low-slope roofs Fall protection – Steep roofs
14
Number of Serious Violations - FY 2011 14 Subpart N - Helicopters, Hoists, Elevators, and Conveyors (1926.550 - 556) Supporting structure for hoist - Safe working load Load capacities, operating speeds, warnings or instructions posted on cars & platforms
15
Number of Serious Violations - FY 2011 15 Subpart O - Motor Vehicles, Mechanized Equipment, & Marine Operations (1926.600 - 606) Earthmoving/compacting equipment - Reverse signal alarm Bidirectional machines - Horn Approval for modifications Lifting/hauling equipment - Use of safety platform Industrial trucks - ANSI B56.1-1969
16
Number of Serious Violations - FY 2011 16 Subpart P - Excavations (1926.650 - 652) Employee protection in excavations - Protective system use Inspections by competent person Protection from falling/rolling materials/equipment Egress from trench excavations Competent person inspection - Employees removed from hazard
17
Number of Serious Violations - FY 2011 17 Subpart Q - Concrete & Masonry Construction (1926.700 - 706) Reinforcing steel - Guarding Masonry walls - Bracing Limited access zone
18
Number of Serious Violations - FY 2011 18 Subpart R – Steel Erection (1926.750 - 761) Protection from fall hazards Roof/floor hole openings – Decked over Fall protection for connectors – 15’ to 30’ Fall hazard training Fall protection for connectors – More than 2 stories or 30’
19
Number of Serious Violations - FY 2011 19 Subpart T - Demolition (1926.850 - 860) Engineering survey - Prior to operations Shoring/bracing for damaged structures Wall openings protected No materials dropped outside exterior walls Floor openings covered
20
Number of Serious Violations - FY 2011 20 Subpart X - Ladders (1926.1050 - 1060) Defective portable ladders – Removed from service Portable ladders 3 feet above landing surface Top of stepladder improperly used Training program Appropriate use of ladders
21
Number of Serious Violations - FY 2011 21 Subpart Z - Toxic & Hazardous Substances (1926.1100 - 1152) Asbestos - Exposure assessment by competent person Asbestos – Before work, employers determine ACM/PACM* Asbestos - Training program Asbestos – Class I, II & III work in regulated areas * Asbestos-containing material/Presumed asbestos-containing material Asbestos – Before work, building owners determine ACM/PACM*
22
Number of Serious Violations - FY 2011 22 Subpart CC - Cranes and Derricks in Construction (1926.1400 - 1442) Hooks – Self-closing latches Barriers to mark swing radius hazard area Equipment inspections every 12 months Signal person – Qualification requirements Ground condition – Firm, drained & graded Qualified rigger
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.