1. INTERNATIONAL UNIVERSITY COLLEGE OF TECHNOLOGY TWINTECH
FORMULA STUDENT BY
HAIFREE BIN HAISON
MODH JALALLUDIN
MOHD FAKHRUL IZZAT BIN NORDIN
SUPERVISOR: MR. FAIZ
-DIPLOMA IN MECHANICAL ENGINEERING-

2. CONTENT OF PRESENTATION
INTRODUCTION
LITERATURE REVIEW
RESEARCH AND METHODOLOGY
RESULTS AND ANALYSIS
CONCLUSION AND RECOMMENDATION

3. Chapter 1 : Introduction

4. Background
To create something new in formula student with different parts in combination of formula 1 and also formula varsity.
This formula student use 3-cyclinder engine, different with formula 1 use 6-cyclinder engine and formula varsity use 2-cyclinder engine.

6. Problem Statement
The system uses by combined in both formula varsity and formula 1 to build a formula student.

7. Objective To create something new in a world of automotive
To understand better about this formula student and compared with ordinary car.

8. Project Scope
We have use 3-cyclinder engine to build this formula student and show the different with formula1 and formula varsity.

9. Significance Of Studies
This formula student is a development of combination formula varsity and formula 1.
It show the differences in formula varsity with uses 3-cyclinder engine rather 2-cyclinder engine and hope this is another step forward in new formula varsity contest.

10. Limitation The engine can only goes to 60 mPh – 90 mPh.
The cockpit can only support the weight of 60kg.

11. Chapter 2: Literature review

12. Literature Review Table
NAME
TITLE/YEAR
SUMMARIZATION
Donald Cheah
TOP GEAR magazine
(March 2009 )
The history of formula three and the idol CLAY REGAZZONI.
(September 2009)
The legendary F1 driver in 70’s FRANCOIS CEVERT and make the F1 top sport in 70’s.
(April 2010)
Lotus is back in F1 after 16 years and how the lotus team made their F1 with their own technology.
(December 2010)
Show that in the 80’s year, the F1 engine turbocharged cars were the king that time.

13. Chapter 3: Methodologies

14. Block Diagram Part FORMULA STUDENT Engine gear Brake Rear wheel
Shift gear
front wheel
Cylinder head
Block
gearbox
oilsam

15. (engine and body frame)
Start
Create a detail design
Cut the dimension
(engine and body frame)
Welding and joining
(engine and body frame)
Wiring and assemble the brake system
Assemble part of engine

16. Check the engine performance
Install engine
Check the engine performance
Tighten the screw and welding finishing
Painting and finishing work
Finish

20. Chapter 4 : Result & Analysis

22. PROBLEMS ENCOUNTERED & COUNTERMEASURES

23. PROBLEM 1 : Engine frame mounted upside down
Solution : Change the frame back

24. Chapter 5 : Conclusion & Recommendation

25. Conclusion
This project is a one step forward for formula student and also hope in formula varsity for new contest in different engine capasity.
With this 3-cyclinder engine for formula student it is something new and differences for formula 1 and formula varsity.

26. Recommendation
Can be modified to improve the perfomance of the engine.
The introduction for new clases contest in formula varsity for 3-cyclinder engine.
Hope our project can be continous by junior student

27. References
Formula varsity UTeM UTeM : Formula Varsity is  an international  student racing competition that challenges students to design, manufacture and race their single seat open-wheel formula style racing car in real track condition. 
Rules of formula varsity UTeM : FORMULA VARSITY TECHNICAL SPECIFICATIONS
Formula student Germany : International design competition

28. Perodua kancil engine specifications
Making a Chassis Frame Alignment Jig :  based on a chassis checking jig from the factory workshop manual
Kartbuilding Blog : SolidWorks CAD Drawing Of Tony Cart Chassis

29. THANK YOU