Presentation is loading. Please wait.

Presentation is loading. Please wait.

Intro Stats Lesson 2.1 A Objective: SSBAT construct a frequency distribution. Standards: S2.5B.

Similar presentations


Presentation on theme: "Intro Stats Lesson 2.1 A Objective: SSBAT construct a frequency distribution. Standards: S2.5B."— Presentation transcript:

1 Intro Stats Lesson 2.1 A Objective: SSBAT construct a frequency distribution. Standards: S2.5B

2 A Limited Lunch At lunch, twelve of the children chose from the following types of sandwiches: peanut butter, jelly, peanut butter and jelly, marshmallow fluff, jelly and fluff, or peanut butter and fluff. Oliver does not like nuts and so chose to have just a jelly sandwich, as did Kenny. Kate had plain peanut butter on her sandwich and so did David because he doesn’t like jelly or marshmallow fluff. A sandwich with marshmallow fluff only was taken by Mariko, while Kristen chose one with marshmallow fluff and peanut butter. Sam and Stephanie wanted a sandwich with peanut butter and jelly as did Laura and Isabel and a jelly and fluff sandwich was chosen by both Ty and Brandon.

3 Peanut Butter Peanut Butter and Jelly Jelly Jelly and Fluff Fluff Peanut Butter and Fluff DavidLauraKennyBrandonMarikoKristen KateSamOliverTy Stephanie Isabel The same information as the paragraph is shown in the table – which is easier to understand?

4 Frequency Distribution  A table that shows Classes/Intervals of data entries with a count of the number of entries in each class. Frequency (f)  The number of data entries in a class

5 ClassFrequency, f 1 – 55 6 – 108 11 – 156 16 – 208 21 – 255 26 – 304 Example of a Frequency Distribution

6 Lower Class Limit  The smallest number that can belong to a class Upper Class Limit  The largest number that can belong to a class Class Width  The difference between consecutive Lower (or upper) limits in a class

7 ClassFrequency, f 1 – 55 6 – 108 11 – 156 16 – 208 21 – 255 26 – 304 Examples: 1.What are the Lower Class Limits?  1, 6, 11, 16, 21, 26

8 ClassFrequency, f 1 – 55 6 – 108 11 – 156 16 – 208 21 – 255 26 – 304 Examples: 2. What are the Upper Class Limits?  5, 10, 15, 20, 25, 30

9 ClassFrequency, f 1 – 55 6 – 108 11 – 156 16 – 208 21 – 255 26 – 304 Examples: 3.What is the class width?  6 – 1 = 5

10 Range of the Data  The difference between the Highest number and the Lowest number in the Data set  Biggest # minus Smallest #

11 Construction a Frequency Distribution 1.Decide on the number of Classes to use  Should be between 5 and 20 2.Find the class width 3.Find the Class Limits 4.Make a tally mark for each data entry in the row 5.Count the tally marks to find the total frequency, f, for each class

12 Finding the class width 1.Determine the range of the data 2.Divide the range by the number of classes 3. Round up to the next convenient number

13 Finding the Class Limits 1.Use the smallest data entry as the Lower Limit of the 1 st class. 2.To find the other Lower Limits, Add the class width to the previous lower limit. Continue doing this until you have all the lower limits. 3.Then find the Upper Limit of the first class, using the lower limits to guide you. Remember classes cannot overlap. Find the other upper limits in a similar manner.

14 1. The number of text messages received in one hour by 36 different students are listed below. Create a Frequency Table that has 5 classes. 2, 8, 10, 11, 16, 16, 25, 29, 1, 8, 12, 19, 20, 22, 29, 5, 7, 12, 17, 21, 26, 3, 9, 12, 17, 20, 22, 27, 23, 18, 13, 15, 6, 10, 5, 9 First: Find the Maximum and Minimum data entry  1 and 29 Second: Find the Range using these 2 entries  29 – 1 = 28

15

16 2, 8, 10, 11, 16, 16, 25, 29, 1, 8, 12, 19, 20, 22, 29, 5, 7, 12, 17, 21, 26, 3, 9, 12, 17, 20, 22, 27, 23, 18, 13, 15, 6, 10, 5, 9 4 th : Find the Lower Limits (class width is 6) The first lower limit is 1 (Now add 6 to this number to get the next one) 1 7 13 19 25

17 2, 8, 10, 11, 16, 16, 25, 29, 1, 8, 12, 19, 20, 22, 29, 5, 7, 12, 17, 21, 26, 3, 9, 12, 17, 20, 22, 27, 23, 18, 13, 15, 6, 10, 5, 9  Make table and put lower limits in it (keep in mind the problem asked for 5 classes – so you will need 5 rows. ClassTallyFrequency (f)

18 2, 8, 10, 11, 16, 16, 25, 29, 1, 8, 12, 19, 20, 22, 29, 5, 7, 12, 17, 21, 26, 3, 9, 12, 17, 20, 22, 27, 23, 18, 13, 15, 6, 10, 5, 9  Find the upper class limits by going 1 less than the next lower limit ClassTallyFrequency (f) 1 – 6 7 – 12 13 – 18 19 – 24 25 – 30

19 2, 8, 10, 11, 16, 16, 25, 29, 1, 8, 12, 19, 20, 22, 29, 5, 7, 12, 17, 21, 26, 3, 9, 12, 17, 20, 22, 27, 23, 18, 13, 15, 6, 10, 5, 9  Using the numbers from the data set, put tallies in the appropriate row of the table and then add to get the Frequency ClassTallyFrequency (f) 1 – 6 llllll 6 7 – 12 lllllllllll 11 13 – 18 lllllll 7 19 – 24 lllllll 7 25 – 30 llll 5

20

21 2.The number of minutes 50 internet subscribers spent on the internet during their most recent session are listed below. Create a Frequency Table that has 7 classes. 50, 40, 41, 17, 11, 7, 22, 44, 28, 21, 19, 23, 37, 51, 54, 42, 86, 41, 78, 56, 72, 56, 17, 7, 69, 30, 80, 56, 29, 33, 46, 31, 39, 20, 18, 29, 34, 59, 73, 77, 36, 39, 30, 62, 54, 67, 39, 31, 53, 44 First: Find the Maximum and Minimum data entry  7 and 86 Second: Find the Range using these 2 entries  86 – 7 = 79

22 50, 40, 41, 17, 11, 7, 22, 44, 28, 21, 19, 23, 37, 51, 54, 42, 86, 41, 78, 56, 72, 56, 17, 7, 69, 30, 80, 56, 29, 33, 46, 31, 39, 20, 18, 29, 34, 59, 73, 77, 36, 39, 30, 62, 54, 67, 39, 31, 53, 44

23 Fourth: Find all the lower limits – You need 7 classes 50, 40, 41, 17, 11, 7, 22, 44, 28, 21, 19, 23, 37, 51, 54, 42, 86, 41, 78, 56, 72, 56, 17, 7, 69, 30, 80, 56, 29, 33, 46, 31, 39, 20, 18, 29, 34, 59, 73, 77, 36, 39, 30, 62, 54, 67, 39, 31, 53, 44 ClassTallyFrequency (f)

24 50, 40, 41, 17, 11, 7, 22, 44, 28, 21, 19, 23, 37, 51, 54, 42, 86, 41, 78, 56, 72, 56, 17, 7, 69, 30, 80, 56, 29, 33, 46, 31, 39, 20, 18, 29, 34, 59, 73, 77, 36, 39, 30, 62, 54, 67, 39, 31, 53, 44  Make table and put lower limits in it (keep in mind the problem asked for 7 classes – so you will need 7 rows. ClassTallyFrequency (f) 7 - 19 - 31 - 43 – 55 - 67 - 79 –

25  Find the upper class limits by going 1 less than the next lower limit 50, 40, 41, 17, 11, 7, 22, 44, 28, 21, 19, 23, 37, 51, 54, 42, 86, 41, 78, 56, 72, 56, 17, 7, 69, 30, 80, 56, 29, 33, 46, 31, 39, 20, 18, 29, 34, 59, 73, 77, 36, 39, 30, 62, 54, 67, 39, 31, 53, 44 ClassTallyFrequency (f) 7 – 18 19 – 30 31 – 42 43 – 54 55 – 66 67 – 78 79 – 90

26 50, 40, 41, 17, 11, 7, 22, 44, 28, 21, 19, 23, 37, 51, 54, 42, 86, 41, 78, 56, 72, 56, 17, 7, 69, 30, 80, 56, 29, 33, 46, 31, 39, 20, 18, 29, 34, 59, 73, 77, 36, 39, 30, 62, 54, 67, 39, 31, 53, 44 ClassTallyFrequency (f) 7 – 18 XXXXXX 6 19 – 30 XXXXXXXXXX 10 31 – 42 XXXXXXXXXXXXX 13 43 – 54 XXXXXXXX 8 55 – 66 XXXXX 5 67 – 78 XXXXXX 6 79 – 90 XX 2  Using the numbers from the data set, put tallies in the appropriate row of the table and then add to get the Frequency

27 ∑ f  Means the sum of all the Frequencies  To find this number, add all of the numbers in the frequency column together  ∑ is Greek for “sum of”  The sum of the frequencies (∑ f) should Equal the number of data entries in the beginning problem

28 ClassTallyFrequency (f) 7 – 18 XXXXXX 6 19 – 30 XXXXXXXXXX 10 31 – 42 XXXXXXXXXXXXX 13 43 – 54 XXXXXXXX 8 55 – 66 XXXXX 5 67 – 78 XXXXXX 6 79 – 90 XX 2 ∑ f = 50

29 Homework Worksheet 2.1 A


Download ppt "Intro Stats Lesson 2.1 A Objective: SSBAT construct a frequency distribution. Standards: S2.5B."

Similar presentations


Ads by Google