2. 1 by Gin-Shian Lou DGT,Chinese Taipei Email:james@dgt.gov.tw May 11, 2005 May 11, 2005 Approval Regulatory Framework

3. 2 DGT Outlines  Approval Regulatory Overview  Approval Regulatory Schema  Low Power RF Devices Technical Regulations  Terminal Equipment Technical Regulations  Conformity Assessment Scheme  Conformity Assessment Requirements  Marking Requirements  Market Surveillance and Enforcement  Mutual Recognition of Test Report  Mutual Recognition of Certification

4. 3 DGT Approval Regulatory Overview (1/9) Equipment Approval Related Articles in Telecom Act 1999 電信法 §44 §39 §49, 50 §48 §46 §42 §39 §49, 50 §48 §46 § 42§44 Controlled Radio Equipment General Requirements ISM General Requirements Network Equipment General Requirements TTE General Requirements TTE Approval Authority Station General Requirements 2003 Telecommunications Act

5. 4 DGT  Equipment Approval Related Articles  Article 42  Article 44  Article 50 Telecommunications Act Telecommunications Terminal Equipment Controlled Telecommunications Radio Frequency Device Approval Regulatory Overview (2/9)  Article 49

6. 5 DGT Approval Regulatory Overview (3/9)  Article 42, Telecommunications Act (1/2)  The telecommunications terminal equipment for connection to the telecommunications machinery and line facilities of a Type I telecommunications enterprise shall conform to technical specifications, and be certified and approved before import and sale. The technical specifications shall be prescribed and announced by the Directorate General of Telecommunications (DGT).  The DGT shall enact regulations regarding the compliance approval mode and procedure of the telecommunications terminal equipment, the issuance, renewal, replacement and termination of the certificate of approval, and the embossment, marking and use of Approval Label, as well as the regulations with respect to the supervision and administration of compliance approval.  The aforementioned technical specifications must ensure the following:

7. 6 DGT  The connection shall not damage telecommunications machinery and line facilities of Type I telecommunications enterprise, or malfunction of the said facilities.  Any nuisance shall not be caused to other users of the telecommunication machinery and line facilities of a Type I telecommunications enterprise.  The demarcation of responsibility between the telecommunications machinery and line facilities of a Type I telecommunications enterprise and the terminal equipment connected by users shall be clearly stipulated.  Ensure electromagnetic compatibility to harmonize and effective use of the radio spectrum.  Ensure electrical safety to prevent harm to network operator personnel or users. Approval Regulatory Overview (4/9)  Article 42, Telecommunications Act (2/2)

8. 7 DGT  The DGT or the certification bodies commissioned by the DGT shall be responsible for compliance approval of telecommunications terminal equipment.  Regulations governing the qualifications, the scope and limitations of delegated power, cancellation or termination of the commission, and supervision related to the commission of the aforementioned certification bodies shall be enacted by the DGT. Approval Regulatory Overview (5/9)  Article 44, Telecommunications Act

9. 8 DGT  To ensure national security and maintain the orderly sequence of radio waves, permission to manufacture, import, install or possess controlled telecommunications radio frequency devices shall be obtained from the MOTC; the model numbers and quantities of such devices manufactured or imported shall be reported to the MOTC for further reference.  Regulations governing the operation permit of manufacture or import of controlled telecommunications radio frequency devices, the issuance, renewal, replacement and termination of operation license, administration of manufacture, import, installation and possession of the said devices, and other related matters shall be enacted by the MOTC. Approval Regulatory Overview (6/9)  Article 49, Telecommunications Act (1/2)

10. 9 DGT  No controlled telecommunications radio frequency device shall be manufactured, imported, sold or publicly displayed unless it has received type approval and recognition of inspections. However, the manufacture of such devices in connection with academic studies, technological research and developments or experiments, as well as uses exclusively for exportation, re-importation after exportation and other uses permitted by the MOTC of such devices are exempted.  The items of controlled telecommunications radio frequency devices mentioned in the first paragraph shall be announced by the MOTC.  Article 49, Telecommunications Act (2/2) Approval Regulatory Overview (7/9)

11. 10 DGT  Technical specifications for controlled telecommunications radio frequency device shall be mandated and announced by the DGT. In the event that national standards are already in place, said standards shall prevail.  Regulations governing the compliance approval mode and procedure of the devices mentioned in the preceding paragraph, the issuance, renewal, replacement and termination of inspection or compliance approval or certificate of approval, the affixing, embossment and use of the inspection Approval Label, as well as regulations related to the supervision and administration of inspection shall be enacted by the DGT. Approval Regulatory Overview (8/9)  Article 50, Telecommunications Act

12. 11 DGT  The DGT or the certification bodies engaged by the DGT shall conduct the compliance approval on of the controlled telecommunications radio frequency devices. Rules governing the qualifications of the said certification bodies, the delegated power, cancellation or termination of the engagement, and supervision related to the engagement shall be enacted by the DGT.  The inspection and technical specifications as prescribed in Article 42 shall apply to controlled telecommunications radio frequency devices that are used in telecommunications terminal equipment.  Article 50, Telecommunications Act Approval Regulatory Overview (9/9)

13. 12 DGT Approval Regulatory Schema Telecom Act Regulatory requirements Technical requirements Compliance Approval requirements  Administration Regulations of Regulatory Certification Body for Controlled Telecommunications Radio-Frequency Devices  Administration Regulations of Regulatory Certification Body for Telecommunications Terminal Equipment  Administrative Regulations on the Controlled Telecommunications Radio-Frequency Devices  Administrative Regulations on Low Power Radio Waves Radiated Devices  Administrative Regulations on Radio Waves of Industrial, Scientific, Medical Equipment  Compliance Approval Regulations on Controlled Telecommunications Radio-Frequency Devices  Compliance Approval Regulations of Telecommunications Terminal Equipment  LP Device: LP0002(1)  TTE: PSTN(5); ISDN(1); PLMN(8); S-PCN(1)

14. 13 DGT  Regulations:  Administrative Regulations on the Controlled Telecommunications Radio-Frequency Devices  Administrative Regulations on Low Power Radio Waves Radiated Devices  Compliance Approval Regulations on Controlled Telecommunications Radio-Frequency Devices  Technical Specifications:  LP0002: Low Power RF Devices Technical Specifications  Regulations:  Administrative Regulations on the Controlled Telecommunications Radio-Frequency Devices  Administrative Regulations on Low Power Radio Waves Radiated Devices  Compliance Approval Regulations on Controlled Telecommunications Radio-Frequency Devices  Technical Specifications:  LP0002: Low Power RF Devices Technical Specifications Low Power RF Devices Technical Regulations (1/5)

15. 14 DGT  Article 3, Administrative Regulations on the Controlled Telecommunications Radio-Frequency Devices  Article 3, Administrative Regulations on the Controlled Telecommunications Radio-Frequency Devices The controlled telecommunications devices(CTD) indicate those authorized radio frequency devices specified in the Section 4, Article 49 of the Telecommunications Act. Two Types for above Radio Equipment: 1) A License to operate a radio apparatus: Pursuant to paragraph 6 of Article 14, Article 47, Article 46 of ACT 2) License Exempt to operate a radio apparatus: through conformity Assessment Process Ex: Low Power License-Exempt Radio communication Devices The controlled telecommunications devices(CTD) indicate those authorized radio frequency devices specified in the Section 4, Article 49 of the Telecommunications Act. Two Types for above Radio Equipment: 1) A License to operate a radio apparatus: Pursuant to paragraph 6 of Article 14, Article 47, Article 46 of ACT 2) License Exempt to operate a radio apparatus: through conformity Assessment Process Ex: Low Power License-Exempt Radio communication Devices Low Power RF Devices Technical Regulations (2/5)

16. 15 DGT The controlled telecommunications radio frequency devices shall not be manufactured, imported, sold or publicly displayed if they acquired neither type approvals nor recognition of inspections. However, the manufacture, exportation only and other purposes permitted by the MOTC for those devices in connection with academic studies, technological researches and developments, or experiments are ruled out.  Article 10, Administrative Regulations on the Controlled Telecommunications Radio-Frequency Devices  Article 10, Administrative Regulations on the Controlled Telecommunications Radio-Frequency Devices Low Power RF Devices Technical Regulations (3/5)

17. 16 DGT  Article 4, Administrative Regulations on Low Power Radio Waves Radiated Devices The compliance approval of low power radio-frequency devices shall be conducted pursuant to ”Compliance Approval Regulations on Controlled Telecommunications Radio Frequency Devices” and “Low-power Radio-frequency Devices Technical Specifications”. A certificate of approval will be issued to the applicant while DGT or regulatory certification body (RCB) approves the low power radio-frequency devices in accordance with the regulations specified in the preceding Paragraph. The format of certificate is defined and determined by DGT. The compliance approval of low power radio-frequency devices shall be conducted pursuant to ”Compliance Approval Regulations on Controlled Telecommunications Radio Frequency Devices” and “Low-power Radio-frequency Devices Technical Specifications”. A certificate of approval will be issued to the applicant while DGT or regulatory certification body (RCB) approves the low power radio-frequency devices in accordance with the regulations specified in the preceding Paragraph. The format of certificate is defined and determined by DGT.  Article 5, Administrative Regulations on Low Power Radio Waves Radiated Devices The Low Power RF Device means the controlled telecommunications radio- frequency devices in compliance with “Low-power Radio-frequency Devices Technical Specifications” Low Power RF Devices Technical Regulations (4/5)

18. 17 DGT The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. Low Power RF Devices Technical Regulations (5/5)  Article 10, Administrative Regulations on Low Power Radio Waves Radiated Devices The manufacturer, importer or supplier of low-power radio-frequency devices shall print the requirements stipulated in Article 12, 14 on the operation manual or instruction guide. The manufacturer, importer or supplier of low-power radio-frequency devices shall print the requirements stipulated in Article 12, 14 on the operation manual or instruction guide.  Article 12, Administrative Regulations on Low Power Radio Waves Radiated Devices Without permission granted by the DGT, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. Without permission granted by the DGT, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices.  Article 14, Administrative Regulations on Low Power Radio Waves Radiated Devices

19. 18 DGT Terminal Equipment Technical Regulations (1/9)  Regulation:  Compliance Approval Regulations of Telecommunications Terminal Equipment  Technical Specifications:  PLMN01: GSM 900 and DCS1800 Mobile Equipment  PLMN02: 1900MHz Digital Low Tier PHS Radio Terminal Equipment  PLMN03: 1900MHz Digital Low Tier PACS Radio Terminal Equipment  PLMN04: Trunked Radio Terminal Equipment  PLMN05: Mobile Data Radio Terminal Equipment  PLMN06: Paging Receiver Radio Terminal Equipment  PLMN07: 1880-1895MHz Wireless Private Branch Exchange and Radio Terminal Equipment  PLMN08: The Third Generation Mobile Telecommunication Terminal Equipment  PSTN01: Terminal Equipment for Connection to Public Switched Telephone Network  RTTE01: 2.4GHzRadio-frequency Telecommunications Terminal Equipment  ADSL01: Asymmetric Digital Subscriber Line Terminal Equipment and POTS Splitter  ID0002: DS1 Equipment Type Approval Guidelines  IT0002: CT-2 Wireless Private Branch Exchange System Equipment Type Approval Guidelines  IS6100: ISDN Terminal Equipment  IS2019: 1.6/2.4 GHz Satellite Personal Communications Networks (S-PCN) Mobile Earth Stations (MESs) Technical Requirements and Type Approval Guidelines  Regulation:  Compliance Approval Regulations of Telecommunications Terminal Equipment  Technical Specifications:  PLMN01: GSM 900 and DCS1800 Mobile Equipment  PLMN02: 1900MHz Digital Low Tier PHS Radio Terminal Equipment  PLMN03: 1900MHz Digital Low Tier PACS Radio Terminal Equipment  PLMN04: Trunked Radio Terminal Equipment  PLMN05: Mobile Data Radio Terminal Equipment  PLMN06: Paging Receiver Radio Terminal Equipment  PLMN07: 1880-1895MHz Wireless Private Branch Exchange and Radio Terminal Equipment  PLMN08: The Third Generation Mobile Telecommunication Terminal Equipment  PSTN01: Terminal Equipment for Connection to Public Switched Telephone Network  RTTE01: 2.4GHzRadio-frequency Telecommunications Terminal Equipment  ADSL01: Asymmetric Digital Subscriber Line Terminal Equipment and POTS Splitter  ID0002: DS1 Equipment Type Approval Guidelines  IT0002: CT-2 Wireless Private Branch Exchange System Equipment Type Approval Guidelines  IS6100: ISDN Terminal Equipment  IS2019: 1.6/2.4 GHz Satellite Personal Communications Networks (S-PCN) Mobile Earth Stations (MESs) Technical Requirements and Type Approval Guidelines

20. 19 DGT The Telecommunications Terminal Equipment mentioned herein shall refer to any digital or analog equipment that interfaces with the end point of the Public Switched Telecommunications Network by using wireless or wired transmission media and conducts communications by means of optical or electromagnetic wave. Terminal Equipment Technical Regulations (2/9)  Article 2, Compliance Approval Regulations of Telecommunications Terminal Equipment ◎ Definition of TTE

21. 20 DGT Terminal Equipment Technical Regulations (3/9) ◎ Principle of TTE Technical Specifications oThe relevant TTE technical specifications shall be formulated and announced in public by the DGT oThe aforementioned technical specifications shall not only contain test items and standards, but also ensure the following:  The connection should not damage telecommunications network facilities of Type I telecommunications enterprises, or malfunction the said facilities.  Any nuisance shall not be caused to other users of the telecommunications network facilities of Type I telecommunications enterprises.  The demarcation of responsibility between the telecommunications network facilities of Type I telecommunications enterprises and the terminal equipment connected by users shall be clearly clarified.  The connection of TTE shall ensure it is normally interfaced with the telecommunications network facilities of Type I telecommunications enterprises.  Ensure Electro-Magnetic Compatibility (hereinafter as EMC) to harmonize and effective use of the radio spectrum.  Ensure electrical safety to prevent harm to network operator personnel or users. oThe relevant TTE technical specifications shall be formulated and announced in public by the DGT oThe aforementioned technical specifications shall not only contain test items and standards, but also ensure the following:  The connection should not damage telecommunications network facilities of Type I telecommunications enterprises, or malfunction the said facilities.  Any nuisance shall not be caused to other users of the telecommunications network facilities of Type I telecommunications enterprises.  The demarcation of responsibility between the telecommunications network facilities of Type I telecommunications enterprises and the terminal equipment connected by users shall be clearly clarified.  The connection of TTE shall ensure it is normally interfaced with the telecommunications network facilities of Type I telecommunications enterprises.  Ensure Electro-Magnetic Compatibility (hereinafter as EMC) to harmonize and effective use of the radio spectrum.  Ensure electrical safety to prevent harm to network operator personnel or users.  Article 4, Compliance Approval Regulations of Telecommunications Terminal Equipment

22. 21 DGT Terminal Equipment Technical Regulations (4/9) ◎ Essential Requirements of TTE Limit to  Harm to network and users  Electromagnetic Compatibility  Electrical safety

23. 22 DGT ◎ EMC/Electrical Safety Requirements for TTE Terminal Equipment Technical Regulations (5/9)  EMC test : All TTE are requested to conduct EMC test to CNS 13438 from June 28, 2002.  Electrical Safety test : Up to now, the following TTE are requested to conduct Electrical Safety test to CNS 14336 from June 28, 2002. ã xDSL ã IP Phone ã Cable Modem ã DS1 TTE ã Cellular Phone (IEC/EN 60950, Jan 7, 2004)  Article 4, Compliance Approval Regulations of Telecommunications Terminal Equipment The test items relating to EMC and electrical safety of TTE and date of enforcement shall be announced in public by the DGT.

24. 23 DGT Terminal Equipment Technical Regulations (6/9)  Enforcement Date: From July 1, 2001 on, Marking warnings on cellular phone, measuring the SAR values and posting the SAR values of cellular phone were mandated by DGT. That is, since July 1, 2001, applicants for compliance approval of cellular phones are required to submit SAR test reports or verdict data to the DGT. (Ref: Specific Absorption Rate, SAR )  SAR standards: ã 2G Cell Phone(PLMN 01, Section 3); 3G Cell Phone(PLMN 08, Section 3.1.2) ã The DGT adopts the same SAR limits “1.6 W/kg, as measured over 1 gram of human tissue” as the FCC and IEEE does. Meanwhile, the DGT adopts the required measurements procedure for the standard, such as FCC Part 2.1093, FCC OET Bulletin 65(Supplement C), ANSI/IEEE C95.1 and ANSI/IEEE C95.3, Std. 1528-200x or the ANSI/IEEE relevant latest requirements.  Enforcement Date: From July 1, 2001 on, Marking warnings on cellular phone, measuring the SAR values and posting the SAR values of cellular phone were mandated by DGT. That is, since July 1, 2001, applicants for compliance approval of cellular phones are required to submit SAR test reports or verdict data to the DGT. (Ref: Specific Absorption Rate, SAR )  SAR standards: ã 2G Cell Phone(PLMN 01, Section 3); 3G Cell Phone(PLMN 08, Section 3.1.2) ã The DGT adopts the same SAR limits “1.6 W/kg, as measured over 1 gram of human tissue” as the FCC and IEEE does. Meanwhile, the DGT adopts the required measurements procedure for the standard, such as FCC Part 2.1093, FCC OET Bulletin 65(Supplement C), ANSI/IEEE C95.1 and ANSI/IEEE C95.3, Std. 1528-200x or the ANSI/IEEE relevant latest requirements. ◎ SAR Requirements for TTE (1/4)

25. 24 DGT Terminal Equipment Technical Regulations (7/9)  The SAR test report shall contain the followings: 1. Equipment name, brand name and model number. 2. Testing facility connection diagram and description. 3. Name, brand name and model number of test instruments. 4. Test items and standards. 5. Test data and verdict of test results. 6. Date of acceptance and completion of testing.  The SAR test report shall contain the followings: 1. Equipment name, brand name and model number. 2. Testing facility connection diagram and description. 3. Name, brand name and model number of test instruments. 4. Test items and standards. 5. Test data and verdict of test results. 6. Date of acceptance and completion of testing. ◎ SAR Requirements for TTE (2/4)

26. 25 DGT Terminal Equipment Technical Regulations (8/9) ◎ SAR Requirements for TTE (3/4)  RF Exposure Warning Label: (PLMN01, Section 3.9; PLMN08, Section 3.1.2) SAR Label SAR label content: “ SAR limit 1.6 W/Kg; after testing value: W/Kg” Labeling method: Label accordingly on handset, carton, or in user’s manual. RF Exposure Warning Label Warning: ”For Reducing RF Influence, Use Properly “ Labeling method: Label accordingly on handset, carton, or in user’s manual.  Label requirements and Format

27. 26 DGT Terminal Equipment Technical Regulations (9/9)  For Domestic testing labs: The test report shall be issued by the testing labs with the SAR scope accredited by the CNLA and comply with the SAR requirements of the DGT.  For Foreign testing labs: The test report shall be issued by the testing labs with the SAR scope accredited by the third party and comply with the SAR requirements of the DGT.  For MRA CAB: The test report shall be issued by the testing labs with the SAR scope accredited by its Accreditation Body, designated by its Designating Authority as a MRA CAB and comply with the SAR requirements of the DGT.  For Domestic testing labs: The test report shall be issued by the testing labs with the SAR scope accredited by the CNLA and comply with the SAR requirements of the DGT.  For Foreign testing labs: The test report shall be issued by the testing labs with the SAR scope accredited by the third party and comply with the SAR requirements of the DGT.  For MRA CAB: The test report shall be issued by the testing labs with the SAR scope accredited by its Accreditation Body, designated by its Designating Authority as a MRA CAB and comply with the SAR requirements of the DGT. ◎ SAR test reports how to be accepted by the DGT (4/4)

28. 27 DGT Conformity Assessment Schema Testing Lab Accreditation Body [TAF/CNLA] Comply with ISO/IEC Guide 58 Testing Labs Comply with ISO/IEC 17025 CABs Product Certification Accreditation Body [TAF/CNAB] Comply with ISO/IEC Guide 61 Accredited/Designated Appointed/Designated Accredited Certification Bodies Comply with ISO/IEC 17025& ISO/IEC Guide 65 Designating Authority/Regulator [DGT] CNLA:Chinese National Laboratory AccreditationCNAB:Chinese National Accreditation Board TAF:Taiwan Accreditation Foundation

29. 28 DGT Conformity Assessment Requirements (1/12 )  Regulations amended ( Coming into force in Nov. 2004):  Compliance Approval Regulations on Controlled Telecommunications Equipment  Compliance Approval Regulations of Telecommunications Terminal Equipment  Outline of the amendment  SDoC (Supplier’s Declaration of Conformity) is introduced as conformity assessment requirements.  Foreign manufacturers can directly apply for compliance approval.  Electronic Filing System for the public to submit application package is introduced.  Regulations amended ( Coming into force in Nov. 2004):  Compliance Approval Regulations on Controlled Telecommunications Equipment  Compliance Approval Regulations of Telecommunications Terminal Equipment  Outline of the amendment  SDoC (Supplier’s Declaration of Conformity) is introduced as conformity assessment requirements.  Foreign manufacturers can directly apply for compliance approval.  Electronic Filing System for the public to submit application package is introduced. ◎ Regulations Amendments

30. 29 DGT ◎ Two Types of Conformity Assessment Process for TTE and LP Conformity Assessment Requirements (2/12 ) Technical Regulations Certification (Type Approval) Supplier Declaration of Compliance (SDoC)

31. 30 DGT  Type Approval : Apply to the approval procedure by the manufacturer, importer or distributor in accordance with the brand name, model number of TTE/LP that shall be submitted to the Directorate General of Telecommunications or DGT recognized certification bodies.  Supplier Declaration of Conformity(SDoC) ： A process in which the Declaring Party has the TTE/LP tested and declare in a signed application form accompanying with the required document to RCB that the TE complies with the appropriate technical standards.  Type Approval : Apply to the approval procedure by the manufacturer, importer or distributor in accordance with the brand name, model number of TTE/LP that shall be submitted to the Directorate General of Telecommunications or DGT recognized certification bodies.  Supplier Declaration of Conformity(SDoC) ： A process in which the Declaring Party has the TTE/LP tested and declare in a signed application form accompanying with the required document to RCB that the TE complies with the appropriate technical standards. Conformity Assessment Requirements (3/12 ) ◎ Definition of Type Approval and SDoC for TTE and LP

32. 31 DGT Conformity Assessment Requirements (4/12 ) ◎ Category of Compliance Approval for TTE and LP Category of Compliance Approval Sale use Private use (For LP device only) SDoC Approval by Piece Approval by Piece Type Approval Type Approval

33. 32 DGT Conformity Assessment Requirements (5/12 ) ◎ Compliance Approval Requirements for TTE and LP

34. 33 DGT Conformity Assessment Requirements (6/12 ) ◎ Elements of Test Report for TTE and LP  The test report includes:  Color photographs larger than 4R of the unit to show details of external appearance and internal construction  Name, trade name, model number of equipment  Name and address of applicant  Name and address of testing lab  Unique identity for test report and page test report  Testing instrument connection diagram and description  Name, trade and model number of testing facilities as well as date of calibration and period of validity  date of calibration and period of validity  Technical regulations be performed  Test items and its standards  Verdict of test results  Date of acceptance and completion of testing  The test report includes:  Color photographs larger than 4R of the unit to show details of external appearance and internal construction  Name, trade name, model number of equipment  Name and address of applicant  Name and address of testing lab  Unique identity for test report and page test report  Testing instrument connection diagram and description  Name, trade and model number of testing facilities as well as date of calibration and period of validity  date of calibration and period of validity  Technical regulations be performed  Test items and its standards  Verdict of test results  Date of acceptance and completion of testing

35. 34 DGT Conformity Assessment Requirements (7/12 ) ◎ Technical Requirements for TTE and LP o TTE and CTD both shall comply with the test items and standards as specified in the relevant technical specifications; where the test items and standards are not available, testing shall be performed in accordance with the following order: Ⅰ. National standards Ⅱ. Standards specified by the international standard organization Ⅲ. Standards specified by the regional standard organization + National Standards : CNS + International Standards: ITU-T; ITU-R; ISO; IEC; JTC1 + Regional Standard: ETSI; ANSI; TTC; CEN; T1 o TTE and CTD both shall comply with the test items and standards as specified in the relevant technical specifications; where the test items and standards are not available, testing shall be performed in accordance with the following order: Ⅰ. National standards Ⅱ. Standards specified by the international standard organization Ⅲ. Standards specified by the regional standard organization + National Standards : CNS + International Standards: ITU-T; ITU-R; ISO; IEC; JTC1 + Regional Standard: ETSI; ANSI; TTC; CEN; T1

36. 35 DGT Conformity Assessment Requirements (8/12 ) ◎ Conformity Assessment Procedure for TTE and LP (Sale Use) Equipment conformity assessment Pass secondary review? Is the supplement complete and adequate Accept application and charge approval fees Is the application package complete and adequate? Issue certificate of approval RCB RTL Testing Test Report Turn down the application Application for secondary review within prescribed time frame Applicant will receive notification of failure and shall apply for secondary review within 2 months Turn down the application Supplement within prescribed time frame Supplement within 1 months on receipt of notification from RCB Applicant Equipment Sample 1.Application Form 2.Copies of related identification documents 3.Technical documents No Yes No Pass Fail

37. 36 DGT Conformity Assessment Requirements (8/12 ) ◎ Conformity Assessment Procedure for TTE and LP (Private Use) Accept Application and charge approval fees RCB Is the application package complete and adequate? Equipment conformity assessment Issue Certificate of approval and label Pass secondary review? Is the supplement complete and adequate Applicant Turn down the application Application for secondary review within prescribed time frame Turn down the application Applicant will receive notification of failure and shall apply for secondary review within 2 months Supplement within prescribed time frame Supplement within 1 months on receipt of notification from RCB 1.Application Form 2.Equipment sample 3.Copies of related identification documents 4.Technical documents No Yes Pass Fail

38. 37 DGT Conformity Assessment Requirements (9/12 ) ◎ SDoC for TTE and LP o Planning to the products apply SDoC:  The products has short life cycle.  The Products has stable quality and low Safety risks.  Less impact on consumers o Starting with small area of products, to see the knowledge and cooperation manufacturers, importers and distributors have to meet the certification regulations. o The items of equipment and date of implementation applicable to the SDoC procedure will be announced by the DGT. It is expected to put into force in the end of 2005. o Planning to the products apply SDoC:  The products has short life cycle.  The Products has stable quality and low Safety risks.  Less impact on consumers o Starting with small area of products, to see the knowledge and cooperation manufacturers, importers and distributors have to meet the certification regulations. o The items of equipment and date of implementation applicable to the SDoC procedure will be announced by the DGT. It is expected to put into force in the end of 2005.

39. 38 DGT Conformity Assessment Requirements (10/12 ) ◎ SDoC and Registration Requirements for TTE and LP  Equipment testing must be performed by DGT recognized testing laboratories  Compliance Folder are kept by RCB.  Sample equipment, testing software and special testing facilities are kept by Declaring Party for 5 years until the equipment doesn’t be manufactured or imported  The Equipment models will be registered by RCB.  Equipment testing must be performed by DGT recognized testing laboratories  Compliance Folder are kept by RCB.  Sample equipment, testing software and special testing facilities are kept by Declaring Party for 5 years until the equipment doesn’t be manufactured or imported  The Equipment models will be registered by RCB.

40. 39 DGT Conformity Assessment Requirements (11/12 ) ◎ SDoC and Registration Procedure for TTE and LP (1/2)  Submission to RCB – Registration application form – User Manuel – Spec. document – Circuit diagram or Block diagram – Test report – Certificate of establishment for legal entity – Operation certificate of CTD (Foreign manufacturers are exempted) – Other documents specified by DGT – 5 Compact Discs including the above information – Registration fee  Submission to RCB – Registration application form – User Manuel – Spec. document – Circuit diagram or Block diagram – Test report – Certificate of establishment for legal entity – Operation certificate of CTD (Foreign manufacturers are exempted) – Other documents specified by DGT – 5 Compact Discs including the above information – Registration fee

41. 40 DGT Conformity Assessment Requirements (12/12 ) ◎ SDoC and Registration Procedure for TTE and LP (2/2)  RCB action – Review for completeness – Grant Certificate of SDoC – Register Equipment on the List XXXyyyRFDzzzz-x XXX: RCB Identification yyy : Year Identification zzzz: Serial No. x : Identify as series products, a-z  Declaring Party action – Label the Equipment – Distribute the Equipment for market XxxYYyyy=z X : RCB Identification xx : Year Identification YY : Equipment Category yyy : Serial No. z : Identify as series products  SDoC Mark showed as below:

42. 41 DGT Marking Requirements (1/6) ◎ Label Requirements  The exclusive right of use relating to Approval Label belongs to the one who has been granted the certificate of approval.  When the certificate holder agrees to empower its approval label to others with respect to the same brand name and model number and submits a signed consent statement accompanying with the required documents to the DGT, the DGT will send an acknowledgement to the original party after reviewing the material submitted.  Certified equipment shall bear the identifying marks for market.  The identifying marks shall be affixed to the certified equipment.  The exclusive right of use relating to Approval Label belongs to the one who has been granted the certificate of approval.  When the certificate holder agrees to empower its approval label to others with respect to the same brand name and model number and submits a signed consent statement accompanying with the required documents to the DGT, the DGT will send an acknowledgement to the original party after reviewing the material submitted.  Certified equipment shall bear the identifying marks for market.  The identifying marks shall be affixed to the certified equipment.

43. 42 DGT ◎ Label Empowerment Process  Submission by Certificate Holder – Authorization Letter – Compliance Approval Certificate or SDoC Certificate – Legal Entity Certificate of Authorized Party  RCB action – Review for completeness – Send acknowledgement to the original certificate holder  Submission by Certificate Holder – Authorization Letter – Compliance Approval Certificate or SDoC Certificate – Legal Entity Certificate of Authorized Party  RCB action – Review for completeness – Send acknowledgement to the original certificate holder Marking Requirements (2/6)

44. 43 DGT ◎ TTE Approval Mark XxxYYyyy-z -For Sale Use: X : RCB Identification xx : Year Identification YY : Equipment Category yyy : Serial No. z : Identify as series products -For Private Use: AxxYYyyy/z A : stand for “DGT” xx : Year Identification YY : Equipment Category yyy : Serial No. z : Certified regulatory station of DGT Marking Requirements (3/6) N: Northern Regional Station; C: Central Regional Station; S: Southern Regional Station

45. 44 DGT ◎ Low Power RF Devices Approval Mark XXXyyyLPDzzzz-x -For Sale Use: XXX: RCB Identification yyy : Year Identification zzzz: Serial No. x : Identify as series products, a-z -For Approval by Piece: DGTxxxLPDyyyy xxx : Year Identification yyyy: Serial No. -For Private Use: DGTxxxLPDyzzzz xxx : Year Identification y : Certified regulatory station of DGT zzzz: Serial No. Marking Requirements (4/6)

46. 45 DGT ◎ Warning Label (Indoor Wireless TTE products) Marking Requirements (5/6) ◎ Warning Label (Cellular Phone)

47. 46 DGT o There's a requirement specified that RCBs are to perform some surveillance of the products they certify o Each RCB is required to have a market surveillance program in place to monitor all of the products it certifies o RCB is being carried out surveillance program mandatory o Each RCB needs to define what market surveillance it plans to perform and that DGT would assess each RCB's plan every year. o There's a requirement specified that RCBs are to perform some surveillance of the products they certify o Each RCB is required to have a market surveillance program in place to monitor all of the products it certifies o RCB is being carried out surveillance program mandatory o Each RCB needs to define what market surveillance it plans to perform and that DGT would assess each RCB's plan every year. Market Surveillance (1/3)

48. 47 DGT o DGT/RCB determine whether a certified equipment maintains conformity with technical standards and the identity by sampling in the market. o Surveillance Method ã Electric Characteristics Test ã Examine conformity with the technical regulations ã Comparison and Verification ã Identity with color photographs Market Surveillance (2/3)

49. 48 DGT o Performed by DGT ã Randomly ã In response to complaints o Performed by RCBs ã For apparatus that they have certified o May result in testing to technical specifications o Fines will be applied o Performed by DGT ã Randomly ã In response to complaints o Performed by RCBs ã For apparatus that they have certified o May result in testing to technical specifications o Fines will be applied Market Surveillance (3/3)

50. 49 DGT Mutual Recognition of Test Report (1/5) ◎ Phase I of MRA implementation Recognized Testing Lab (RTL)Designation Criteria p Legal entity which has the technical competence to perform the tests p Accredited with ISO/IEC 17025 p Demonstration of technical competence in performing the tests. p Technological knowledge and experience of relevant product p Familiar with legislative, regulatory and administrative provisions p Legal entity which has the technical competence to perform the tests p Accredited with ISO/IEC 17025 p Demonstration of technical competence in performing the tests. p Technological knowledge and experience of relevant product p Familiar with legislative, regulatory and administrative provisions

51. 50 DGT Mutual Recognition of Test Report (2/5) o Submit application package to CNLA o CNLA will review the application package. If it is acceptable, the process for the accreditation will be undertaken by CNLA o CNLA will issue a RTL accreditation certificate to applicant if competent and submit the accredited testing lab list to DGT for RTL designation and recognition. o DGT will make this public on its website (www.dgt.gov.tw) ◎ Phase I of MRA implementation Domestic RTL Designation Process

52. 51 DGT DGT how to recognize foreign testing lab as the MRA CAB? ◎ Phase I of MRA implementation Mutual Recognition of Test Report (3/5)  Under APEC Telecom MRA, the foreign testing lab must be accredited by its Accreditation Body and designated by its Designating Authority as a MRA CAB.  Then, the Designating Authority of exporting Party will exchange the list of designated testing lab with DGT for mutual recognition.  Furthermore, the DGT will recognize the MRA CABs if the testing labs are competent to perform testing subject to technical regulations of DGT.  Once the MRA CABs are recognized by DGT, the DGT will make this public on our Website soon.  Under APEC Telecom MRA, the foreign testing lab must be accredited by its Accreditation Body and designated by its Designating Authority as a MRA CAB.  Then, the Designating Authority of exporting Party will exchange the list of designated testing lab with DGT for mutual recognition.  Furthermore, the DGT will recognize the MRA CABs if the testing labs are competent to perform testing subject to technical regulations of DGT.  Once the MRA CABs are recognized by DGT, the DGT will make this public on our Website soon.

53. 52 DGT ◎ Phase I of MRA implementation Mutual Recognition of Test Report (4/5) Foreign test reports how to be accepted by Chinese Taipei (1/2)  Under the APEC Telecom MRA, DGT can accept the test reports provided by the recognized foreign testing lab designated by the correspondent party based on mutual recognition.  The testing must follow the method specified in the DGT technical regulations if such test method is prescribed. If no test method is specified, reasonable testing will be allowed. The test report at least must include:  Color photographs larger than 4R of the unit to show details of external appearance and internal construction  Name, trade name, model number of equipment  Name and address of applicant  Name and address of testing lab  Unique identity for test report and page test report  Testing instrument connection diagram and description  Under the APEC Telecom MRA, DGT can accept the test reports provided by the recognized foreign testing lab designated by the correspondent party based on mutual recognition.  The testing must follow the method specified in the DGT technical regulations if such test method is prescribed. If no test method is specified, reasonable testing will be allowed. The test report at least must include:  Color photographs larger than 4R of the unit to show details of external appearance and internal construction  Name, trade name, model number of equipment  Name and address of applicant  Name and address of testing lab  Unique identity for test report and page test report  Testing instrument connection diagram and description

54. 53 DGT  Name, trade and model number of testing facilities as well as date of calibration and period of validity  date of calibration and period of validity  Technical regulations be performed  Test items and its standards  Verdict of test results  Date of acceptance and completion of testing  The testing lab must submit its first application with the test report, including the test procedures, lab layout and photos.  Name, trade and model number of testing facilities as well as date of calibration and period of validity  date of calibration and period of validity  Technical regulations be performed  Test items and its standards  Verdict of test results  Date of acceptance and completion of testing  The testing lab must submit its first application with the test report, including the test procedures, lab layout and photos. ◎ Phase I of MRA implementation Mutual Recognition of Test Report (5/5) Foreign test reports how to be accepted by Chinese Taipei (2/2)

55. 54 DGT Mutual Recognition of Certification (1/16) ◎ Phase II of MRA implementation Rules for RCB o To smoothly promote phase II procedures of APEC Telecom MRA and make preparation in advance to implement mutual acceptance of equipment certifications with other APEC economies, the following rules are stipulated and promulgated. ë Administration Regulations of Regulatory Certification Body for Telecommunications Terminal Equipment ë Administration Regulations of Regulatory Certification Body for Controlled Telecommunications Radio-Frequency Devices o The two rules provides for the criteria, procedures for designating a RCB, as well as the responsibilities and obligation of a RCB. o To smoothly promote phase II procedures of APEC Telecom MRA and make preparation in advance to implement mutual acceptance of equipment certifications with other APEC economies, the following rules are stipulated and promulgated. ë Administration Regulations of Regulatory Certification Body for Telecommunications Terminal Equipment ë Administration Regulations of Regulatory Certification Body for Controlled Telecommunications Radio-Frequency Devices o The two rules provides for the criteria, procedures for designating a RCB, as well as the responsibilities and obligation of a RCB.

56. 55 DGT ◎ Phase II of MRA implementation Designation of a RCB o The DGT will form a technical team to accredit the organization which is interested and competent to be RCB. o An entity accredited by the DGT will be designated as a RCB. o The DGT will also recognize a CB designated by a foreign Designating Authority in accordance with the terms of APEC Telecom MRA. o A list of designated RCBs will be published by the DGT. o The DGT will form a technical team to accredit the organization which is interested and competent to be RCB. o An entity accredited by the DGT will be designated as a RCB. o The DGT will also recognize a CB designated by a foreign Designating Authority in accordance with the terms of APEC Telecom MRA. o A list of designated RCBs will be published by the DGT. Mutual Recognition of Certification (2/16)

57. 56 DGT ◎ Phase II of MRA implementation o Legal entity o Not be a importer, designer, manufacturer, supplier of TTE/LP device nor being engaged in these activities o Accredited to ISO/IEC Guide 65 o Equipped with local testing laboratories which demonstrate competence in performing tests and accredited to ISO/IEC 17025 accredited by the DGT or a local Recognized Accreditation Body ò A foreign RCB shall also equipped with testing lab which demonstrate competence in performing tests and accredited to ISO/IEC 17025 o Familiar with legislative, regulatory and administrative provisions of DGT o Sign a contract by which they commit themselves to carry out compliance approval process in accordance with DGT rules and procedures (not applicable to foreign RCB) o Legal entity o Not be a importer, designer, manufacturer, supplier of TTE/LP device nor being engaged in these activities o Accredited to ISO/IEC Guide 65 o Equipped with local testing laboratories which demonstrate competence in performing tests and accredited to ISO/IEC 17025 accredited by the DGT or a local Recognized Accreditation Body ò A foreign RCB shall also equipped with testing lab which demonstrate competence in performing tests and accredited to ISO/IEC 17025 o Familiar with legislative, regulatory and administrative provisions of DGT o Sign a contract by which they commit themselves to carry out compliance approval process in accordance with DGT rules and procedures (not applicable to foreign RCB) RCB Designation Criteria (1/2) Mutual Recognition of Certification (3/16)

58. 57 DGT o Designate at least one professional and full-time foreign or domestic personnel for each accreditation scope subject to certification.(Note: one more certifier for TTE, two more certifier for LP device) o The personnel involved in the certification process should be independent from those conduct the testing. o The certification personnel shall have the technical expertise and knowledge in telecommunications, as well as being familiar with the DGT rules, regulations and technical specifications. o The certification personnel is requested to be graduated from the domestic or foreign university/college and majored in telecommunications engineering, electrical engineering, electronic engineering or other relevant majors. o Designate at least one professional and full-time foreign or domestic personnel for each accreditation scope subject to certification.(Note: one more certifier for TTE, two more certifier for LP device) o The personnel involved in the certification process should be independent from those conduct the testing. o The certification personnel shall have the technical expertise and knowledge in telecommunications, as well as being familiar with the DGT rules, regulations and technical specifications. o The certification personnel is requested to be graduated from the domestic or foreign university/college and majored in telecommunications engineering, electrical engineering, electronic engineering or other relevant majors. ◎ Phase II of MRA implementation RCB Designation Criteria (2/2) Mutual Recognition of Certification (4/16)

59. 58 DGT ◎ Phase II of MRA implementation How to recognize foreign certification body as the RCB? o Under APEC Telecom MRA, the foreign certification body must be accredited by its Accreditation Body and designated by its Designating Authority as a MRA CAB. o Then, the Designating Authority of exporting Party will exchange the list of designated accreditation body with DGT for mutual recognition. o Furthermore, the DGT will recognize the MRA CABs if the certification body are competent to perform certification subject to technical regulations of DGT. o Once the MRA CABs are recognized as the RCBs by DGT, the DGT will make public on our Website soon. o Under APEC Telecom MRA, the foreign certification body must be accredited by its Accreditation Body and designated by its Designating Authority as a MRA CAB. o Then, the Designating Authority of exporting Party will exchange the list of designated accreditation body with DGT for mutual recognition. o Furthermore, the DGT will recognize the MRA CABs if the certification body are competent to perform certification subject to technical regulations of DGT. o Once the MRA CABs are recognized as the RCBs by DGT, the DGT will make public on our Website soon. Mutual Recognition of Certification (5/16)

60. 59 DGT ◎ Phase II of MRA implementation Responsibility of a RCB (1/3) A RCB shall--- o Certify equipment in accordance with the DGT’s rules in the name of RCB and in the written form o Provide fair and equitable treatment o Send certified products list to DGT o Perform post-market surveillance activities, under instructions or request by the DGT ò A foreign RCB may appoint a local organization to perform market surveillance activities. o Report the outcomes of market surveillance to the DGT(at least 5% of the total number of products certified in a year). A RCB shall--- o Certify equipment in accordance with the DGT’s rules in the name of RCB and in the written form o Provide fair and equitable treatment o Send certified products list to DGT o Perform post-market surveillance activities, under instructions or request by the DGT ò A foreign RCB may appoint a local organization to perform market surveillance activities. o Report the outcomes of market surveillance to the DGT(at least 5% of the total number of products certified in a year). Mutual Recognition of Certification (6/16)

61. 60 DGT o Submit copies of each application package to the DGT (complete application until the contract is due) o All application documentation shall be recorded on the CD and send to DGT for reference. o Set a electrical database to store all applications and list of certified product o Authorize DGT to review all the certified equipment information stored in the database set up by the RCB via internet o Accept MRA CABs test reports o Hold 2 workshops per year to introduce the certification regulations and procedure to the public o Submit copies of each application package to the DGT (complete application until the contract is due) o All application documentation shall be recorded on the CD and send to DGT for reference. o Set a electrical database to store all applications and list of certified product o Authorize DGT to review all the certified equipment information stored in the database set up by the RCB via internet o Accept MRA CABs test reports o Hold 2 workshops per year to introduce the certification regulations and procedure to the public ◎ Phase II of MRA implementation Responsibility of a RCB (2/3) Mutual Recognition of Certification (7/16)

62. 61 DGT o Charge fees for processing applications in accordance with the fees schedule stipulated by the MOTC o Keep confidential treatment regarding to material submitted with an application which contain trade secret or other information that would be guarded from competitors requested/identified by the applicant, in accordance with the relevant regulations of information/business protection. o Charge fees for processing applications in accordance with the fees schedule stipulated by the MOTC o Keep confidential treatment regarding to material submitted with an application which contain trade secret or other information that would be guarded from competitors requested/identified by the applicant, in accordance with the relevant regulations of information/business protection. ◎ Phase II of MRA implementation Responsibility of a RCB (3/3) Mutual Recognition of Certification (8/16)

63. 62 DGT ◎ Phase II of MRA implementation Limitations of a RCB (1/2) A RCB can not--- o Violate the rules o Refuse audit without acceptable reason o Default on conducting certification cases o Overrun the scope not empowered or not listed on the contract o Provide consultation services to the applicants for compliance approval or change technical characteristic of the equipment applied for approval A RCB can not--- o Violate the rules o Refuse audit without acceptable reason o Default on conducting certification cases o Overrun the scope not empowered or not listed on the contract o Provide consultation services to the applicants for compliance approval or change technical characteristic of the equipment applied for approval Mutual Recognition of Certification (9/16)

64. 63 DGT o Subcontract certification work to non-accredited CAB or qualified person o Commit any improper competitive means which is likely to impede regular certification or fair competition, such as boycott, deviated from regulations or participating in a combination or a concerted action o Approve a TE application not listed on the list authorized by DGT o Perform actively market surveillance subject to products certified by other RCBs o Subcontract certification work to non-accredited CAB or qualified person o Commit any improper competitive means which is likely to impede regular certification or fair competition, such as boycott, deviated from regulations or participating in a combination or a concerted action o Approve a TE application not listed on the list authorized by DGT o Perform actively market surveillance subject to products certified by other RCBs ◎ Phase II of MRA implementation Limitations of a RCB (2/2) Mutual Recognition of Certification (10/16)

65. 64 DGT ◎ Phase II of MRA implementation Scopes of Accreditation (1/4) PSTN Telecommunications Terminal Equipment (PSTN01,RTTE01,ID0002, ADSL01)  Telephone set  Modem  Automatic alarming equipment  Caller ID equipment  Modem  PBX  Telephone answering machine  KTS  Telephone microphone  CTI  Fax (Facsimiles) machine  Remote control device  46/49 MHz Cordless Telephone  2.4GHz RF TTE  DS1 terminal equipment  ADSL Terminal Equipment and POTS Splitter  Telephone set  Modem  Automatic alarming equipment  Caller ID equipment  Modem  PBX  Telephone answering machine  KTS  Telephone microphone  CTI  Fax (Facsimiles) machine  Remote control device  46/49 MHz Cordless Telephone  2.4GHz RF TTE  DS1 terminal equipment  ADSL Terminal Equipment and POTS Splitter Mutual Recognition of Certification (11/16)

66. 65 DGT ◎ Phase II of MRA implementation Scopes of Accreditation (2/4) ISDN Telecommunications Terminal Equipment (IS6100)  ISDN digital phone  ISDN PC add-on card  ISDN G4 fax machine  ISDN PABX  ISDN video phone  other ISDN CPEs  ISDN terminal adapter  ISDN digital phone  ISDN PC add-on card  ISDN G4 fax machine  ISDN PABX  ISDN video phone  other ISDN CPEs  ISDN terminal adapter S-PCN Telecommunications Terminal Equipment (IS2019)  1.6/2.4 GHz Satellite Personal Communications Networks (S- PCN) Mobile EarthStations (MESs) Mutual Recognition of Certification (12/16)

67. 66 DGT ◎ Phase II of MRA implementation Scopes of Accreditation (3/4)  Paging Receiver Radio terminal equipment  Mobile Data Radio Terminal Equipment  Trunked Radio Terminal Equipment  1900MHz Digital Low Tier PHS Radio Terminal Equipment  1900MHz Digital Low Tier PACS Radio Terminal Equipment  1880-1895MHz Wireless Private Branch Exchange and Radio Terminal Equipment  GSM Mobile Terminal Equipment  DCS1800 Mobile Terminal Equipment  The Third Generation Mobile Telecommunication Terminal Equipment  Subscriber A CT-2 wireless PABX system consists of PABX, control equipment (orrelated equipment), CT-2 base station and handset  Subscriber B CT-2 wireless PABX system consists of control equipment (or related equipment), CT-2 base station and handset  Paging Receiver Radio terminal equipment  Mobile Data Radio Terminal Equipment  Trunked Radio Terminal Equipment  1900MHz Digital Low Tier PHS Radio Terminal Equipment  1900MHz Digital Low Tier PACS Radio Terminal Equipment  1880-1895MHz Wireless Private Branch Exchange and Radio Terminal Equipment  GSM Mobile Terminal Equipment  DCS1800 Mobile Terminal Equipment  The Third Generation Mobile Telecommunication Terminal Equipment  Subscriber A CT-2 wireless PABX system consists of PABX, control equipment (orrelated equipment), CT-2 base station and handset  Subscriber B CT-2 wireless PABX system consists of control equipment (or related equipment), CT-2 base station and handset PLMN Telecommunications Terminal ( PLMN01~PLMN08) Mutual Recognition of Certification (13/16)

68. 67 DGT  Devices operating in the frequency band below (including) 1GHz  Devices operating in the frequency band above 1GHz except for Unlicensed National Information Infrastructure Devices, frequency hopping or digitally modulated devices  Device employing frequency hopping or digital modulation techniques or Unlicensed National Information Infrastructure Devices  Devices operating in the frequency band below (including) 1GHz  Devices operating in the frequency band above 1GHz except for Unlicensed National Information Infrastructure Devices, frequency hopping or digitally modulated devices  Device employing frequency hopping or digital modulation techniques or Unlicensed National Information Infrastructure Devices ◎ Phase II of MRA implementation Scopes of Accreditation Scopes of Accreditation (4/4) Low-Power Radio-frequency Devices (LP0002) Mutual Recognition of Certification (14/16)

69. 68 DGT ◎ Phase II of MRA implementation Limitation on Certain Scopes o Device for its test procedures are not available or not standardized can’t be approved by a RCB o Devices for which test items and standards are not available can’t be approved by a RCB o Device for its test procedures are not available or not standardized can’t be approved by a RCB o Devices for which test items and standards are not available can’t be approved by a RCB Mutual Recognition of Certification (15/16)

70. 69 DGT ◎ Phase II of MRA implementation CAB Reassessment and Surveillance o Testing Laboratories â Regular reassessment by the accreditation body CNLA/TAF as per CNLA reassessment schedule o Certification Bodies ã DGT: Irregularly audit ã CNAB/TAF:Regular reassessment as per accreditation program for CBs o Testing Laboratories â Regular reassessment by the accreditation body CNLA/TAF as per CNLA reassessment schedule o Certification Bodies ã DGT: Irregularly audit ã CNAB/TAF:Regular reassessment as per accreditation program for CBs Mutual Recognition of Certification (16/16)

71. 70 DGT More information For more detailed information on the contents of the presentation, please visit the following web sites: http://www.dgt.gov.tw/English/Regulations/Regulatio ns.shtml Contact person: Gin-Shian Lou Email: James@dgt.gov.tw Fax: 886-2-2343-3699 Approval Regulatory Framework

72. 71 DGT Thank you Approval Regulatory Framework