1. Morin Flexo Printing Technologies Philip Morin 61 East Main Street Forestville, CT 06010 Tel/Fax: 860.585.1680

2. Morin Flexo Printing Technologies

3. Meeting the Wants and Needs Printer is small, which allows the operator to see everything going on with the printer, making it easier for the operator to make adjustments. Self-cleaning mode helps the operator to keep print quality at the highest level possible. “Our current capabilities are #2 size font”. This unique feature is totally automatic but has a manual mode to switch to when time is a factor. No leaks because our doctor-blade setup is a hybrid of a chambered doctoring system and bottom trough doctoring system. We doctor the ink onto the anilox roll then doctor the excess off with the primary blade. The Print Drum is easy to remove (1 to 2 minutes) allowing for shorter maintenance periods. Small modular design,12” x 12” x 36”, allows the printers to be stacked, giving the customer multi-color capabilities.

4. Table of Contents Objective Customer requirements Meeting the wants and needs Cost savings Print system Ink system Structural features Electrical features Technical specifications Our strengths Your benefits

5. Objective To supply the highest quality modular flexographic printer at a very competitive price and exceed our customers requirements. “To this date, our beta unit has been running for 52 months without down time. Call for references”.

6. Customer Requirements The smallest modular printer 12” x 12” x 36” –Easy to adjust, work on and retrofit High quality printing –New standards for high quality bar coding –Can print #2 size font No leaks –No clean up or contamination Ease of Maintenance –Reduced downtime Multi-color capabilities –Increased need

7. Cost Savings Initial purchase Customer satisfaction Less technical support required No ink spills Installation Less maintenance

8. Print System Stepper motor drive –Repeatability up to.00137 inches @ 15 cycles per minute –Encoder controlled print cycle A True synchronous printer –Eliminating top stock stretch –Eliminating hot peel lift off 500 lines/inch ceramic anilox roller

9. Ink System Doctor blade Quick disconnect ink trough for easy removal “under 10 seconds” Intelligent ink management –Auto fill @ start-up –Auto clean @ 30 minutes idle or manually –Auto shut-down @ completion of clean cycle

10. Standard Structural Features Solid aluminum construction All frame components pinned 80/20 cross members serve as wire ways –Solid frame – end to end Sealed bearings on all rotating components –Eliminates bearing contamination –Prevents premature failure

11. Standard Electrical Features PLC driven –Compatible with any host machine Programmed brake/clutch when required –Reduced component wear Independent safety circuit Compatible w/ European machinery

12. Technical Specifications Millennium Series Foot Print12”w x 12”h x 36”d Drum Diameter8.75” with.125”print plate Print Length 610mm (24’’) Print Width 406mm (16.00”) Print Speed<= 45 cpm Weight130 LBS..

13. Strengths Over 30 years experience in building machinery automation, flexographic printers, and packaging machines while focusing on the customer’s specific wants and needs while meeting their high quality standards.

14. Benefits of Morin Flexo Technologies The Morin flexographic printer is the smallest and most durable in the industry. Its modular design allows for stacking the printers for multi-color printing up to four colors. This unit insures repeatability to within three encoder pulses (1 Pulse is equal to.00137 inches) at fifteen cycles per minute. This encoder will follow the index cycle of any form, fill, and seal machine. The Morin “Intelligent Ink Management System” comes standard with the printer and includes the automated cleaning cycle. Our patented single valve for ink and cleaners, eliminates leaking from back up of semi-dried ink. This no ink flooding system also holds the ink trough and doctor blade horizontally under anilox roll, stopping any ink loss. The anilox roll is ceramic-coated and laser engraved for extended wear.