1. D-Link Security 1 Internal LAN1 IP: 192.168.1.0/24 Internal LAN2 IP: 192.168.2.0/24 Internal LAN3 IP: 192.168.3.0/24 WAN1 IP: 192.168.174.70/24 FTP Server IP:192.168.174.71/24 FTP Server 172.16.1.1 DMZ Scenario & Hands-on 4-1 Port mapping for server Network topology WAN1 IP: 192.168.174.70/24 FTP Server IP:192.168.174.71/24

2. D-Link Security 2 Objectives Access the FTP server by public IP address Configuration logics Create objects of public and private IP addresses for FTP server Create ARP object in ARP Table Cerate the IP rule (SAT and allow) for FTP server Scenario & Hands-on 4-1 Port mapping for server

3. D-Link Security 3 Add the objects of both public and virtual IP addresses for FTP server *Click “Address Book” under Objects Key in the correct IP addresses 1234 Scenario & Hands-on 4-1 Port mapping for server 5

4. D-Link Security 4 Create the object in ARP Table Click “ARP Table” under “Interfaces” Apply objects with the FTP IP address 1234 Scenario & Hands-on 4-1 Port mapping for server 5

5. D-Link Security 5 Create the IP rule to map FTP server (SAT) Click “IP Rule” under “Rules” Choose the correct Action,Service,Interface,SAT setting and Network for the rule 1234 Scenario & Hands-on 4-1 Port mapping for server 5

6. D-Link Security 6 Create the IP rule to allow FTP server (allow FTP) Click “IP Rule” under “Rules” Choose the correct Action,Service,Interface and Network for the rule 1234 Scenario & Hands-on 4-1 Port mapping for server 5

7. D-Link Security 7 Scenario & Hands-on 4-1 Port mapping for server After all configuration, Click “configuration” in main bar Click “Save and Active” 12354

8. D-Link Security 8 Succeed to get in FTP server Scenario & Hands-on 4-1 Port mapping for server

9. D-Link Security 9 WAN1:DHCP FTP Server: Group public IP address FTP Server Group private IP DMZ Scenario & Hands-on 4-1 Exercise 4-1 - Port mapping for server Goal: 1.Access to FTP server from Internet FTP Server public IP Group1: 192.168.200.51/24 Group2: 192.168.200.52/24. Group9: 192.168.200.59/24 Group10: 192.168.200.60/24 FTP Server private IP Group1: 172.17.101.1/24 Group2: 172.17.102.1/24. Group9: 172.17.109.1/24 Group10: 172.17.110.1/24

10. D-Link Security 10 Internal LAN1 IP: 192.168.1.0/24 Internal LAN2 IP: 192.168.2.0/24 Internal LAN3 IP: 192.168.3.0/24 WAN1 IP: 192.168.174.70/24 FTP Server IP:192.168.174.71/24 FTP Server-1 172.16.1.1 DMZ Scenario & Hands-on 4-2 SAT and server load balance Network topology FTP Server-1 172.16.1.2

11. D-Link Security 11 Objectives Access two FTP servers by one public IP address Configuration logics Create objects of public and private IP addresses for two FTP servers Create ARP object in ARP Table Cerate the IP rule (SAT_SLB and allow) for FTP server Scenario & Hands-on 4-2 SAT and server load balance

12. D-Link Security 12 Add the public IP address object for two FTP servers Click “Address Book” under “Objects” Key in the correct IP address 12345 Scenario & Hands-on 4-2 SAT and server load balance 6

13. D-Link Security 13 Add two virtual IP address objects for two FTP servers Click “Address Book” under “Objects” Key in the correct IP address 12345 Scenario & Hands-on 4-2 SAT and server load balance 6

14. D-Link Security 14 Apply the object of IP address to ARP Table Click “ARP Table” under “Interfaces” Apply objects for the FTP IP address 12345 Scenario & Hands-on 4-2 SAT and server load balance 6

15. D-Link Security 15 Create the IP rule of FTP server Click “IP Rule” in Rules Choose correct Action,Service,Interface,SLB_SAT and Network in the rule 12345 Scenario & Hands-on 4-2 SAT and server load balance 6

16. D-Link Security 16 Create the IP rule to allow FTP server (allow FTP) Click “IP Rule” in Rules Choose correct Action,Service,Interface and Network in the rule 12345 Scenario & Hands-on 4-2 SAT and server load balance 6

17. D-Link Security 17 Scenario & Hands-on 4-2 SAT and server load balance After all configuration, Click “configuration” on main menu bar Click “Save and Activate” 123465