Download presentation
Presentation is loading. Please wait.
Published byOliver Harvey Modified over 9 years ago
1
Theories of Matter
2
usually rigid, having definite shape and volume Solids
3
definite volume assume shape of containers but may not fill them can flow under influence of force Liquids
4
low density can flow can completely fill its container easily compressed and rarified Gases
5
exist when the particles of matter have enough kinetic energy that at least some of their electrons become stripped away very high temperatures Plasmas
6
fluid-like, as gases or liquids consist of a neutral mixture of electrons and positively charged particles Plasmas
7
solids, liquids, and gases have been understood for centuries states of matter are difficult to define with precision States of Matter
8
Elements: the basic chemical building blocks of matter cannot be broken down into simpler substances by ordinary means Particles of Matter
9
John Dalton developed atomic theory—matter is made up of atoms now know that atoms can be subdivided Particles of Matter
10
Protons: positively charged particles, found in the nucleus of an atom Neutrons: neutral particles found in the nucleus of an atom Particles of Matter
11
Electrons: negatively charged particles occupying a region of space around the nucleus 1/1860 the mass of a proton Particles of Matter
12
Elementary particles: these make up protons, neutrons, and electons quarks are an example not fully understood Particles of Matter
13
atoms can combine: molecules formula units chemical compounds Particles of Matter
14
Ions: charged particles consisting of one or more atoms with a mismatch between the total numbers of protons and electrons Particles of Matter
15
inconvenient to measure in grams or kilograms relative mass unit atomic mass unit (amu) unified atomic mass unit (u) Atomic Mass
16
Mole: amount of a substance containing 6.022 × 10 23 particles Avogadro’s constant (N A ) or Avogadro’s number Atomic Mass
17
A carbon-12 atom has a mass of 12.00 u. Avogadro’s number of carbon-12 atoms will have a mass of 12.00 g. Atomic Mass
18
Ideal gas model is a good illustration of the kinetic theory Pressure = sum of impulsive forces divided by area of sides Gas Pressure
19
more atoms in the container → greater pressure smaller “area” on which to exert force → greater pressure Gas Pressure
20
greater speed (kinetic energy) of atoms in the container → greater pressure Gas Pressure F = ΔtΔt ΔtΔt 2mv
21
The particles in solids are held rigidly with strong intermolecular force. These particles can vibrate in place. Kinetic Theory
22
The velocity of these vibrations determines the particles’ kinetic energy. Large amounts of kinetic energy are indicated with high temperatures. Kinetic Theory
23
Liquids have particles in close association but with more mobility. Kinetic Theory
24
Cohesion: intermolecular attraction similar particles in a liquid have for each other Kinetic Theory
25
Adhesion: intermolecular attraction between particles of dissimilar materials Kinetic Theory
26
The kinetic theory of matter considers matter as a collection of numerous, extremely tiny particles in continuous motion. Kinetic Theory
27
Although the kinetic theory of matter has limitations, it does a good job predicting the behavior of matter under many conditions. Kinetic Theory
28
States of Matter
29
Arrangement Crystalline solids: particles are held in fixed patterns unit cell NaCl is a good example most metals
30
Arrangement Amorphous solids: particles do not form repeating patterns glass Heterogeneous solids: have combination of crystalline and amorphous solids
31
Elastic Modulus Solids can change shape in response to certain forces Tensile forces tend to pull apart
32
Elastic Modulus Stress (σ): related to the tension force normal (perpendicular) to the cross-sectional area Defined: force per unit area σ = A FF
33
Elastic Modulus Strain (ε): amount stretched (Δl) divided by the initial length (l i ) usually expressed as a simple decimal or percent ε = lili ΔlΔl
34
Elastic Modulus Elastic modulus (E): ratio of the normal stress to the linear strain units: N/m² plural: elastic moduli E = ε σ
35
Elastic Modulus determined experimentally and listed in tables for various substances measure of a material’s resistance to change in shape (stiffness)
36
Elastic Modulus If a wire’s elastic modulus, cross-sectional area, initial length, and the tension exerted on it are known, the change in length can be estimated: Δl = AE F·liF·li
37
Forces Compressive forces: crush or push particles of matter together Shearing forces: tend to cause layers of particles within the solid to slide parallel to each other
38
Shear Modulus Shear stress equals the force exerted parallel to the surface, divided by the surface area. Shear strain is the ratio of deformation of the object parallel to the force, divided by the separation of the two surfaces. Shear modulus (G) is the ratio of shear stress to shear strain: G = shear stress shear strain
39
Stress-Strain Graph
40
Proportional limit: maximum strain without permanent deformation
41
Stress-Strain Graph Elastic limit: limit of reversible deformation
42
Stress-Strain Graph At the fracture point, the object breaks.
43
Stress-Strain Graph Materials work harden when stress is applied in a cyclic way, causing them to become harder or more brittle. This changes the stress- deformation curve.
44
Transitions Melting: from solid to liquid The melting point is usually a predictable temperature at which this occurs
45
Transitions Melting: from solid to liquid A solid’s molecules gain (absorb) enough kinetic energy to break out of their rigid arrangements and move more freely
46
Transitions Melting: from solid to liquid The melting point of a solid also depends on the pressure Water has unusual properties
47
Transitions Water expands when it freezes. higher pressures hinder freezing Regelation: melting under pressure
48
Fluids Liquids and gases are both classified as fluids. no fixed shape assume the shape of their containers can flow under the influence of a force
49
Surface Tension Cohesion at the surface of a liquid pulls the molecules at the surface toward the interior. The net force is inward. This is especially evident with polar molecules like water.
50
Surface Tension explains why water forms into droplets meniscus overflow a glass with water
51
Adhesion a liquid’s surface molecules may be more attracted to an adjoining surface than to each other capillarity liquids flowing into fibrous and porous materials
52
Gas particles are very energetic and widely separated most gases are elements or molecular compounds
53
Vaporization a change of state from solid or liquid to gas Sublimation: directly from solid to gas Boiling: characterized by rapid formation of vapor bubbles within a liquid
54
Vaporization a change of state from solid or liquid to gas Evaporation: vaporization of a liquid below the boiling point and above the freezing point of the liquid
55
Evaporization occurs only at the natural surface of a liquid primary means water uses to return to the atmosphere liquids cool as they evaporate
56
Evaporization in a closed container, a dynamic equilibrium may be reached molecules entering gaseous phase equal in number to those entering liquid phase
57
Evaporization in a closed container, a dynamic equilibrium may be reached vapor pressure: pressure of the gas when the closed system has reached equilibrium
58
Vapor Pressure depends on the kind of liquid and its temperature volatile liquids have low cohesive forces with high vapor pressures
59
Vapor Pressure nonvolatile liquids tend to have lower vapor pressure at a given temperature
60
Condensation vapor goes from the gaseous state to liquid depends on multiple factors
61
Solidification phase transition from liquid to solid also called freezing freezing and melting points are almost always the same for a pure substance
62
Solidification gases can enter the solid phase deposition depends on temperature and other factors
63
Phase Diagrams shows relationships among phases of a substance compared to controlling factors such as pressure and temperature
64
Phase Diagrams Triple point: the combination of temperature and pressure where all three phases of a substance can coexist water: 0.01°C and 0.006 atm
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.