1. 1 SIP-based VoIP Lab

2. 2 Step 1: Connect Your PC to The Network Get your laptop connected to the campus network (both WLAN or wireline will work). –Run ipconfig to show your own IP address –Ping NCNU.SIP.voip.edu.tw (163.22.20.155) –Ping NCNU-GW1.ipv6.club.tw (163.22.20.153) We interconnect via D-Link DES-3225G Switch.

3. 3 ACT Wi-Fi Phone Setting – Wireless – Scan – Set as Preferred AP (TC3AO) Setting – Network – IP Setting – SIP –User Name: 40001 –SIP Server: 163.22.20.155 (ncnu.sip.voip.edu.tw)

4. 4 IP Addresses We Obtained 40001 – 10.10.19.165 40002 – 10.10.19.188 40003 - 10.10.19.71 40004 – 10.10.19.170 40005 – 10.10.19.121 40000 – 10.10.19.4 –Cisco 7960 41001 – 10.10.19.47 41002 – 10.10.19.199 41003 – 10.10.19.164 41004 – 10.10.19.94 41005 – 10.10.19.85 41006 – 10.10.19.57 41007 – 10.10.19.33

5. 5 Step 2: Install Ethereal under Windows Install Ethereal 0.10.14. –It will automatically install WinPcap. Install WinPcap 3.1. –WinPcap is an architecture for packet capture and network analysis for the Win32 platforms. –It includes a kernel-level packet filter, a low-level dynamic link library (packet.dll), and a high-level and system-independent library (wpcap.dll, based on libpcap version 0.6.2)

6. 6 Where to Get Ethereal Official site: –http://www.ethereal.com/ Local mirror: –http://Download.ipv6.club.tw/

7. 7 Step 3: Install a SIP UA Windows Messenger 4.7 (4.7.2009) –Windows XP SP2 will remove the SIP support in Messengers X-Lite NBEN UA Cisco 7960 IP phone Act-Tel WiFi phone

8. 8 Step 4: REGISTER Configure the proxy server to be –NCNU.SIP.voip.edu.tw (163.22.20.155) Start your Ethereal –Disable promiscuous mode –Capture Filter: udp port 5060 –Display the captured packets in real-time –OK Start Windows Messenger Sign-in and observe the packets you capture

9. 9 Ex 1: –Everybody sign-in and sign-off to see the SIP messages. –Sign-in Expires: 3600 –Sign-off Expires: 0 Ex 2: –Two UAs sign in with the same username. 2 Bindings –One UA signs off 1 Binding –The other UA signs off 0 Bindings

10. 10 Now everybody restores to your original username. Keep Ethereal running.

11. 11 Test Your Microphone & Speaker

12. 12 Call Scenarios Practice using this tool to capture SIP signaling in the following call flows –REGISTER – 200 OK –INVITE – 200 OK – ACK –INVITE – CANCEL – 200 OK - ??? – ACK –INVITE – Decline (???) - ACK –BYE – 200 OK –Hold/Retrieve

13. 13 INVITE Pairing students into groups Let the student with lower username be the caller, and the other student be the callee. Make the call. Exchange the role, and make the call again. 1.Call instructor’s Cisco 7960 –20001@NCNU.SIP.voip.edu.tw 2.Call NCNU PBX –4161 (COM), 4131 (CSIE), 4101(EE) Compare the signaling flow of the above two cases

14. 14 Try to capture RTP packets Open a new Ethereal –The old one is still running to capture SIP signaling. Capturing Filter: udp You will obtain 50 packets in a second –Analyze – Decode As – RTP Can you choose a different codec?

15. 15 X-Lite INVITE/200 OK/ACK BYE/200 OK Hold/Retrive RTP

16. 16 SIP Forking Ex 1: –A calls B, C. –B answers. –C receives a CANCEL request. Ex 2: –B calls A, C –Nobody answers. –C hangs up.

17. 17 Contacts (using Messenger) Presence –SUBSCRIBE/NOTIFY –RFC 3265 Instant Message –MESSAGE –RFC 3428