1. Water Treatment Processes

2. Why do we need to treat our drinking water?  Industrial runoff  Agricultural runoff  Road runoff  Residential runoff

3. Industrial Runoff  Some industrial facilities generate ordinary domestic sewage that can run off into sewage drains.  Industries that generate wastewater with high concentrations of conventional pollutants (e.g. oil and grease), toxic pollutants (e.g. heavy metals, volatile organic compounds) or other nonconventional pollutants such as ammonia, need specialized treatment systems.

4. Agricultural Runoff  Nutrients (nitrogen and phosphorus) are typically applied to farmland as commercial fertilizer; animal manure; or spraying of municipal or industrial wastewater (effluent) or sludge.  Nitrates and phosphates derived from these can pose health risks to humans if they end up in the drinking water.  Sediment (loose soil) washed off fields is the largest source of agricultural pollution in the United States

5. Road Runoff  Sediments from construction sites and discharge of toxic chemicals such as motor fuels and concrete washout into the storm drains.

6. Residential/urban runoff  is surface runoff of rainwater created by urbanization. This runoff is a major source of urban flooding and water pollution in urban communities worldwide.

7. Water Treatment Process http://www.youtub e.com/watch?v=9z 14l51ISwg&list=PL 44OxmUx6A8pCBZ RvLEg_fLf7WlWvw Kod&index=2

8. Step 1: Raw Water Intake and Screens  Intake structure - delivers water to the water treatment plant  Lake or Reservoir  Stream or River  Groundwater  Screens – prevent trash, logs, or fish from entering the treatment plant

9. Step 2: Coagulation and Flocculation  In coagulation, coagulants like lime and alum are added to the water, which causes particulates to clump together.  Next, the water is shaken into larger clumps, called flocs.

10. Coagulation and Flocculation

11. Step 3: Sedimentation  The sedimentation process requires that the water stand for 24 hours, which allows the clumps to settle to the bottom.

12. Settling Basin

13. Step 4: Second Filtration  The water is then filtered, disinfected (usually with chlorine) and aerated.  Aeration helps to remove certain contaminants like radon.

14. Disinfection  Disinfection – process designed to kill or deactivate most microorganisms in water, including disease causing bacteria  Types of disinfection:  Physical  Ultraviolet (UV) rays  Heat  Chemical  Chlorine  Ozone Giardia lamblia Fecal Coliforms

15. Storage and Distribution  Storage – keeping water for later use  Elevated tanks  Ground storage tanks  Distribution system – network of pipes and pump stations that transports finished water from the treatment plant to the user