1. TDA100D Contents 1 Target Customer
2 Selling Points 3 Improvement from current KX-TDA100 4　 System Configuration 　
5 Compatibility between TDA100D and TDA/TDE
6 New PCMC
We explain about the TDA100D with the following contents.

2. 1. Target Customer
First there is the Target Customer section.

3. Built-in 4 Digital PT Ports
1. Target Customer
Solutions >>
Small - Mid Size Office
Target : SLTs
MPR
MCSLC 24/16 Card
MCSLC 24/16 Card
MCSLC 24/16 Card
MCSLC 24/16 Card
MCSLC 24/16 Card
DLC4
New 24/16 SLC card for 120 SLTs
Built-in 4 Digital PT Ports
Digital PT for manager or operator
This page shows a target customer of a small to middle sized office.
TDA100D has built-in support for 4DLC ports for Digital PTs without the need for options.
So even if SLTs are used for employees, a manager or operator can use Digital PTs.
Single Line Telephone for employees
Even if SLTs are mainly used, a few Digital PTs are required for manager or operator. New TDA100D has built-in support for 4 DLC ports for these Digital PTs. 3

4. Built-in 4 Digital PT Ports
1. Target Customer
Solutions >>
Warehouse, Car dealer, Factory...
With System Wireless
Retail Stores
Warehouses
MPR
DLC4
Large Residences
Automotive Dealerships
Built-in 4 Digital PT Ports
Schools
Factories
This page shows a target customer of a warehouse, car dealer and so on.
TDA100D has built-in support for 4DLC ports for wireless systems without the need for options.
And wireless systems give you anytime, anywhere access.
Wireless system give you anytime, anywhere access.
New TDA100D supports 4 DLC ports for these wireless systems without the need for options. 4

5. Built-in 4 Digital PT Ports
1. Target Customer
Solutions >>
Small Hotel
Target : Rooms
Built-in 4 Digital PT Ports
MPR
System Wireless for staff
DLC4
MCSLC 24/16 Card
MCSLC 24/16 Card
MCSLC 24/16 Card
232C Serial
New 24/16 SLC card for 50 SLTs
EXT.(room)101 call detail
This page shows a target customer of a small hotel.
TDA100D has built-in support for 4DLC ports for Digital PTs and system wireless without the need for options.
Also new SLC cards have a message waiting lamp control function.
So staff can use system wireless, front desk can use digital PTs, and guests can use SLTs in guest rooms.
In addition, by using CA Call Accounting, it is easy to make a call billing per room.
Digital PT for front desk
KX-T7710 for each room
CA Call Accounting for simple billing
New TDA100D has built-in support for 4 DLC ports for DPTs and system wireless without the need for options.
If you use CA Call Accounting (FOC), it is easy to make a call billing per room. 5

6. 2. Selling Points

7. 2. Selling Points Simple Installation Built-in 【Current TDA100】
Solutions >>
Simple Installation
【Current TDA100】
【New TDA100D】
Built-in
PSU
PSU
DLC
DLC4
For Wireless System
For DPITS Programming
For Future expansion
Provide reasonable wireless system with Built-in DLC and Entry DECT terminal.
Built-in DLC4 can be used for DPITS programming without additional DLC.
No need for PSU type selection. Built-in New PSU enables future expansion.
New
The current TDA100 does not include either the PSU or DLC cards.
The new model TDA100D includes built-in PSU and DLC4.
So TDA100D gives you simple installation, such as installation of system wireless, and DPITS programming without the need for an additional DLC.
In addition it is not necessary to select PSU type even when the system capacity is expanded.
Programming DPITS
Before NO
Need NO
Need
Over-Capacity PSU for
the Future Expansion.
New
Built-in!
CSIF Card
DLC Card
DLC Card
PSU-S
SLT
Entry DECT 7

8. 8-port base analogue CO card KX-TDA1180
2. Selling Points
Solutions >>
Flexible Expansion
New Analog CO Cards & New 24/16 port SLC Cards save slots and
provide expanded capacity
New 24/16 port SLC Card
New Analog CO Card
Built-in both Caller ID Function and Message Waiting Lamp Control
Built-in Caller ID Function
【Current】
【New】
【Current】
【New】
Need 2 types of card
(CSLC & MSLC)
Only need One card
(MCSLC24/16)
Need one LCOT16
+ 2 CID card
Only need two cards
(CLCOT8 + CLCOT8E)
New SLC cards and new analog CO cards save slots and provide expanded capacity.
New SLC cards have built-in caller ID function and message waiting lamp control.
So if you use both caller-ID and message waiting lamp, only one MCSLC card needs to be installed.
New analog CO cards have built-in caller-ID function.
So if you use caller-ID function, only one CLCOT card needs to be installed. .
8-port expansion
daughter card KX-TDA1186
8-port base analogue CO card KX-TDA1180 8

9. from small to mid-sized office Targeting between 24 to 120 SLT
2. Selling Points
Solutions >>
Wide Cover from Upper TES824 to TDA200 Range
【New】
【Current 】
from small to mid-sized office
SLT
8 - 64SLT
(24SLT× 5 + Built-in PSU)
(16SLT x 4 + OPB + PSU-S)
Plus more 8-DPT or Wireless 16 24 64 96
120
128
Max SLT Capacity
TDA100D Range
Targeting between 24 to 120 SLT
PSU/DLC4 Built-in
PSU-M
TDA200 Range
TDA200
TDA100D can cover up to 120pcs SLT with 5pcs 24SLC card.
In addition it can install 8pcs DPT or wireless without the need for options.
So TDA100D can cover from upper TES824 to TDA200 range without changing PSU and MEC cards.
TDA 100
TDA100 Range
TDA 100
PSU-S
TES824 Range
PSU-M
MEC Card 9

10. 3. Improvements from Current KX-TDA100

11. 3. Improvements from Current KX-TDA100
Solutions >>
Feature Differnce from Current KX-TDA100 V5*
More SLT Capacity
Built-in
More Flexibility
< New TDA100D > 7
New PSU (Built-in)
Free slot
Free slot
Free slot
Free slot
Free slot
Free slot
Free slot
MPR
1. System Capacity SLT port
without MEC and Power Supply Unit replacement
2. New 24/16 port SLC card
with built-in Caller ID* and Message Waiting Lamp Control*
3. New Analog CO card
with built-in Caller ID
8 ports by default and additional 8 ports expandability in
same slot by option for easy expandability.
4. New MPR card
with built-in DLC4 (4 DPT + 4 D-XDP) & Serial I/F
5. New Shelf with built-in Power Supply Unit
6. SMDR Call storage – 2500 calls
* PBX software feature is the same as KX-TDA100/200 MPR version 5.
* Message waiting specification is similar to current MSLC16.
* Caller ID specification is similar to current CSLC16.
* Provide new PC Maintenance Console dedicated for TDA100D
(separated from current UPCMC)
* All kind of card will be able to install to Slot 7
DLC4
USB
Serial I/F
< Current TDA100 > 1 2 3 4 5 6
PSU-S/M (Option)
Free slot
Free slot
Free slot
Free slot
Free slot
Free slot
MPR
This page explains the feature differences from the current TDA100.
The number of SLTs is up to 120 without MEC card and PSU replacement.
It can install new 24 and 16 port SLC cards with caller-ID and message waiting lamp control.
It can install new analog CO cards with caller-ID.
New MPR cards have built-in DLC4 and serial I/F.
The new shelf has built-in PSU.
SMDR call storage is up to 2500 calls.
The number of free slots is up to 7.
Serial I/F
USB 11

12. w/o MEC (Max. No. of User is 64)
3. Improvements from Current KX-TDA100
Solutions >>
System Capacity
Simpler installation to expand system capacity than the current TDA100. No additional MEC or PSU is required for Max. configuration (including 128 SLT or 152 DPT/IP-PT).
- Memory Expansion Card is NOT required for more than 64 extensions.
- No need to replace PSU for more than 64 extensions.
Model
TDA100 (reference)
TDA100D
MEC
w/o MEC (Max. No. of User is 64)
w/MEC
Regardless MEC
PSU
PSU-S
PSU-M
New PSU (Built-in)
Extension
System Total 64  96
160
176 (*)
MPR
DPT(DXDP)
4 (8)
Free Slot
IP-PT
112
SLT
128
96(96)
Total
168
Trunk
120
126 (**)
LCOT
BRI
96(48BRI)
112(56BRI)
PRI
120(4PRI)
IP-GW
Maximum 126 trunks are available with one PRI LCOT.
Maximum 176 extensions are available without MEC and replace PSU.
(*) TDA100D: In case of PT configuration : Max. 176 extensions with 104 DPT(DXDP) + 48 IP-PT + 24SLT
(**) Max. 126 trunks with one PRI LCOT. When installing T1, E1, PRI30, or PRI23 cards, make sure that the number of these cards X 2 + the number of other cards (including IP-GW4E cards) does not exceed 8. 12

13. 3. Improvements from Current KX-TDA100
Solutions >>
New SLC24/16 Card (MCSLC24/MCSLC16) with CID and MW lamp
Provide New 24/16 ports SLT interface card with built-in Caller ID and Message Waiting Lamp control.
With this card, users can expand the number of SLT extensions up to 128. (Cannot use DLC4 on MPR cards.)
Configuration Example
Slot
TDA100 w/PSU-M
TDA100D w/new PSU
MPR -
4DPT I/F 1
DHLC8
New MCSLC24/MCSLC16
New MCSLC24 2
SLC16 3 4 5
New MCSLC16 6
(Trunk) 7
(OPB3)
SLT Total 72
120
128
TDA100D supports new SLC24/16 cards with caller-ID and message waiting lamp control, and new SLC24/16 cards are called as MCSLC24/16.
If you use 4pcs MCSLC24 and 2pcs MCSLC16, you can use 128pcs SLTs.
But then you cannot use DLC4 on MPR, because of the limitation of load figure.
- 24/16 SLT ports per card
- Max. 5 MCSLC24/Max.7 MCLSC16 cards per PBX - 2 Power Failure Transfer (PFT) ports
- Built-in Caller ID (FSK) & Message Waiting Lamp Control * Caller ID specification is similar to current CSLC16. * Message waiting Lamp specification is similar to current MSLC16. * No self diagnostic function by PCMC
Specifications 13

14. 3. Improvements from Current KX-TDA100
Solutions >>
New 8-port Analog CO Card with 8-port expansion
Provide New 8-port Analog CO line interface card with 8-port expansion board.
New card will support CID functions as a standard. Accordingly, this card will provide flexible system
expansion capability and low-cost installation for users that require CID.
Built-in
Caller ID Circuit
Built-in
Caller ID circuit
2 PFT ports
Mount to Base board
8–port expansion daughter card
TDA100D supports new 8-port analog CO cards with caller-ID.
And 8-port expansion daughter cards can be mounted on base cards without using slots. Accordingly, these cards will provide flexible system expansion capability.
8-port base LCOT card
- 8 analog trunk ports per card - Expand up to 16 ports with 8 ports daughter card - 2 power failure transfer (PFT) ports for 8 / 16 ports
- Built-in Caller ID - Pay tone detection is not available
- User-supplied Amphenol connector I/F
Specifications 14

15. 3. Improvements from Current KX-TDA100
Solutions >>
New MPR Card for TDA100D
Built-in DLC4 (4 DPT + 4 D-XDP) & Serial I/F for easy and cost effective installation. Users who mainly use SLT do not need to purchase DHLC cards at the initial installation. In addition,
- Expand SRAM capacity for supporting SMDR data registration up to 2500 calls
- I/F for two Music On Hold input ports and two External Pager output connectors will be changed to a RJ45.
- Serial Interface (RS-232C) port will be mounted on MPR card
Note: 1. System will not work correctly when a new MPR card is installed to an existing TDA/TDE shelf.
But no safety issues will occur.
2. Exchange cable, from MOH/Pager mini jack to RJ45, will not be provided.
New
TDA100D
MPR
TDA100
MPR
RJ11
For DLC 4 Ports
TDA100D has a new MPR card.
The new MPR card has built-in DLC4 for installing DPIT or wireless systems, and serial I/F for outputting SMDR data.
In addition, the I/F for Music On Hold and External Pager connectors are changed to RJ45.
SCALE-UP
RJ45
For MOH x2
& Pager x2
RS-232C
For SMDR
SIDE　VIEW
FRONT VIEW
FRONT VIEW 15

16. System Total (DPT, CS and SLC card)
3. Improvements from Current KX-TDA100
Solutions >>
New Shelf and Power Supply Unit for TDA100D
A new shelf with built-in Power Supply Unit (PSU) is provided.
New power supply supports up to 128 load figure including max.104 for DPT/CS (see below).
Therefore, users do not need to replace PSU when expanding the system.
In this respect, TDA100D will cover TDA200 user range.
Note: 1. Power supply and Shelf will be a new design, so there will be some incompatibility with the existing TDA/TDE series.
2. Current PSU-S/M (TDA0108/TDA0104) will not be used for TDA100D.
3. System will not work correctly when existing TDA/TDE MPR cards are installed in to a
new TDA100D shelf. In this case, no safety issues will occur.
Calculate the load figure from the type of equipment to be connected.
Type
Maximum Load Figure
System Total (DPT, CS and SLC card)
128
DPT and CS
104
New PSU-S (Built-in)
TDA100D has a new shelf with a built-in Power Supply Unit.
The new PSU supports up to 128 load figure, so TDA100D will cover the current TDA200 range without needing PSU replacement.
As previously explained, if 128pcs of SLT are used, neither DPT or CS can be used.
Add 7th
Slot
Type
Load Figure PT
DPT (DT300, T7600) 1
IP-PT
SLT card
New MCSLC24 24
New MCSLC16 16 CS
2-4ch CS 4
8ch CS 8
New Shelf and Power Supply 16

17. 4. System Configuration

18. Max. Number of card/unit Max. Number of card/unit
4. System Configuration
Solutions >>
Optional Card / Unit
<Option>
Max. Number of card/unit
TDA100
TDA200
TDA100D
Trunk
Total
6 (*1)
8 (*1)
7 (*1)
LCOT4
LCOT8 6 8 7
LCOT16
CLCOT8 -
CLCOT8E
DID8
E&M8
BRI4
BRI8 T1 E1 4
PRI30
PRI23
IP-GW4
IP-GW4E
IP-GW16
<Option>
Max. Number of card/unit
TDA100
TDA200
TDA100D
Ext
Total 6 8 7
4DPT I/F on MPR - 1
DLC8
DLC16
IP-EXT16
DHLC8
SLC8
SLC16
CSLC16
MSLC16
New MCSLC24 5
New MCSLC16
CSIF4 4
CSIF8
CTI-LINK
OPB3
MSG4
ESVM2
ESVM4
DPH4
DPH2
EIO4
ECHO16 2
TDA100D can install a maximum of 7 trunk cards or 7 extension cards.
Current DHLC8, SLC8, SLC16, CSLC16 and MSLC16 cards will not be supported.
A maximum 128pcs PS can be installed, which is the same as the current TDA100/200. CS
CS(2-4ch) 32 26
CS(8ch) 16 13
(*1) One T1, E1, PRI30, PRI23, or IP-GW4 card counts as 2 cards. 18

19. 4. System Configuration SLT Max. Capacity Comparison
Solutions >>
SLT Max. Capacity Comparison
TDA100
TDA200
TDA100D
PSU-S
PSU-M
PSU-L
New PSU
Extension
System Total 64 96
128
MPR
DPT(DXDP)
4 (8　w/DXDP)
Slot
SLT
120
Analog CO
128
112 96
TDA100 w/ PSU-M & MEC
TDA200 w/ PSU-M
TDA100
w/ PSU-S 48
This is an analog CO and SLT capacity chart.
The capacity of the TDA100D is greater than the current TDA100 with PSU-M and MEC.
In addition, the SLT capacity is the same as the current TDA200.
Expanded SLT capacity 32 16
SLT 64 96
120
128
<CO and SLT capacity chart > 19

20. 5. Compatibility between TDA100D and TDA/TDE

21. 5. Compatibility between TDA100D and TDA/TDE
Solutions >>
New Cards for existing TDA/TDE system
Model
Description
TDE100/200 MPR V3
TDA100/200 MPR V5
MPR Software -
MPR Software of TDA100D No
MPR Card
MPR card of TDA100D (w/ DLC4)
Trunk Cards
KX-TDA1180
8-Port Analogue Trunk Card with CID (CLCOT8)　
No (in future)
KX-TDA1186
8-Port Analogue Trunk with Caller ID daughter Card
(CLCOT8E)
Extension Cards
KX-TDA1178
24-Port Single Line Telephone Card w/ Caller ID & MW Lamp control (MCSLC24)
KX-TDA1176
16-Port Single Line Telephone Card w/ Caller ID & MW Lamp control (MCSLC16)
Power Supply Unit
New S-Type Power Supply Unit (new PSU-S)
All the new cards, PSU and software of the TDA100D cannot be used with the current TDA/TDE series.
It is planned both the new trunk card and new extension card will both be able to be used with the TDE100/200 in future. 21

22. 5. Compatibility between TDA100D and TDA/TDE
Solutions >>
Existing Card for TDA100D (1/3)
Model
Description
TDA100D
MPR Software -
MPR Software of TDA100/200 No
Optional SD Memory
Cards
KX-TDA0820
SD Memory Card for Software Upgrade
KX-TDA0920
SD Memory Card for Software Upgrade to Enhanced Version
Yes(*1)　　
MPR Card
MPR card of TDA100/200 or TDE100/200
No(*2)
MPR Option Card
KX-TDA0105
Memory Expansion Card (MEC)
No (*3)
KX-TDA0196
Remote Card (RMT)
Yes
Trunk Cards
KX-TDA0180
8-Port Analogue Trunk Card (LCOT8)
KX-TDA0181
16-Port Analogue Trunk Card (LCOT16)
KX-TDA0182
8-Port DID Card (DID8)
KX-TDA0183
4-Port Analogue Trunk Card (LCOT4)
KX-TDA0184
8-Port E & M Trunk Card (E&M8)
KX-TDA0187
T-1 Trunk Card (T1)
KX-TDA0188
E-1 Trunk Card (E1)
KX-TDA0189
8-Port Caller ID/Pay Tone Card (CID/PAY8)
KX-TDA0193
8-Port Caller ID Card (CID8)
KX-TDA0284
4-Port BRI Card (BRI4)
KX-TDA0288
8-Port BRI Card (BRI8)
KX-TDA0290CE
PRI Card (PRI30)
KX-TDA0290
PRI Card (PRI23)
KX-TDA0480
4-Channel VoIP Gateway Card (IP-GW4)
KX-TDA0484
4-Channel VoIP Gateway Card (IP-GW4E)
KX-TDA0490
16-Channel VoIP Gateway Card (IP-GW16)
TDA100D cannot use the software of the current TDA100/200 or TDA0820, and the MPR card of the TDA100/200 or TDE100/200.
On the other hand, all of the current trunk cards can be installed to the TDA100D.
(*1): KX-TDA0920 will be updated before TDA100D released,
(*2): Existing TDA/TDE MPR card will be able to install TDA100D KSU physically, but function will not work properly.
(*3): DMPR support 2500 SMDR data registration, so that No MEC card support is needed 22

23. 5. Compatibility between TDA100D and TDA/TDE
Solutions >>
Existing Card for TDA100D (2/3)
Model
Description
TDA100D
Extension Cards
KX-TDA0143
4 Cell Station Interface Card (CSIF4)
Yes
KX-TDA0144
8 Cell Station Interface Card (CSIF8)
KX-TDA0170
8-Port Digital Hybrid Extension Card (DHLC8) No
KX-TDA0171
8-Port Digital Extension Card (DLC8)
Yes(*1)
KX-TDA0172
16-Port Digital Extension Card (DLC16)
KX-TDA0173
8-Port Single Line Telephone Extension Card (SLC8)
KX-TDA0174
16-Port Single Line Telephone Extension Card (SLC16)
KX-TDA0175
16-Port Single Line Telephone Card with MW Lamp (MCSLC16)
KX-TDA0177
16-Port Single Line Telephone Card with Caller ID (CSLC16)
KX-TDA0470
16-Channel VoIP Extension Card (IP-EXT16)
Other Cards
KX-TDA0161
4-Port Door phone Card (DPH4)
KX-TDA0162
2-Port Door phone Card (German Type) (DPH2)
KX-TDA0164
4-Port External Input/Output Card (EIO4)
KX-TDA0166
16-Channel Echo Canceller Card (ECHO16)
KX-TDA0168
Extension Caller ID Card (EXT-CID)
KX-TDA0190
Optional 3-Slot Base Card (OPB3)
KX-TDA0191
4-Channel Message Card (MSG4)
KX-TDA0192
2-Channel Simplified Voice Message Card (ESVM2)
KX-TDA0194
4-Channel Simplified Voice Message Card (ESVM4)
KX- TDA0410
CTI Link Card (CTI-LINK)
Current DHLC8, SLC8, SLC16, MCSLC16 and CSLC16 cards cannot be installed to the TDA100D.
Current DLC8 and DLC16 cards can be installed to the TDA100D, but the software must be updated.
In addition, the Extension caller ID card also cannot be installed.
(*1): KX-TDA0171,0172 LPR Software will be updated before TDA100D released,
so that when users use these existing cards for TDA100D, users must update to new software 23

24. 5. Compatibility between TDA100D and TDA/TDE
Solutions >>
Existing Card for TDA100D (3/3)
Model
Description
TDA100D
Power Supply Units (PSUs)
KX-TDA0103
L-Type Power Supply Unit (PSU-L) No
KX-TDA0104
M-Type Power Supply Unit (PSU-M)
KX-TDA0108
S-Type Power Supply Unit (PSU-S)
Cell Stations (CSs)
2.4GHz
KX-TDA0141
2-Channel CS Using a DHLC/DLC Card for 2.4 GHz PS
KX-TDA0142
3-Channel CS Using a CSIF Card for 2.4GHz PS
KX-TDA0151
Yes
KX-TDA0152
DECT
KX-TDA0141CE
2-Channel CS Using a DHLC/DLC Card for DECT PS
KX-TDA0142CE
4-Channel CS Using a CSIF Card for DECT PS
KX-TDA0155CE
KX-TDA0156CE
KX-TDA0158CE
8-Channel CS Using a DHLC/DLC Card for DECT PS
DECT 6.0
KX-T0155
2-Channel CS Using a DHLC/DLC Card for DECT 6.0 PS
KX-TDA0156
4-Channel CS Using a CSIF Card for DECT 6.0 PS
KX-T0158
8-Channel CS Using a DHLC/DLC Card for DECT 6.0 PS
Proprietary Equipment
KX-A228
S/M-type Back-up Battery Cable
KX-A229
L-type Back-up Battery Cable
KX- A258
Blank Slot Cover
KX-T30865
Door Phone
KX-T7765
TDA100D has a new PSU, so the current PSU-S/M/L cannot be used.
TDA014x series Cell Station cannot be installed.
And the A229 for L-type back-up battery cable cannot be used. 24

25. 5. Compatibility between TDA100D and TDA/TDE
Solutions >>
Terminal Compatibility for TDA100D (1/2)
Model
Description
TDA100D
DPT
DT300
DT346
6Line-LCD, with Backlight, 12CO, USB, Bluetooth optional
Yes
Series
DT343
3LIne-LCD, with Backlight, 12CO, USB, Bluetooth optional
DT333
3Line-LCD, No Backlight
DT321
1Line-LCD, 8CO
DT390
DSS console
T7600
T7636
6Line-LCD, with Backlight, 12CO, USB Optional
T7633
3LIne-LCD, with Backlight, 12CO, USB Optional
T7630
T7668
1Line-LCD
T7667
1Line-LCD, No Backlight, 12CO
T7665
1Line-LCD, No Backlight
T7625
No-LCD
T7640
T7500 series No
T7400 series
T7200 series
This is the DPT compatibility for the TDA100D.
T72xx, T74xx and T75xx series cannot be used with the TDA100D. 25

26. 5. Compatibility between TDA100D and TDA/TDE
Solutions >>
Terminal Compatibility for TDA100D (2/2)
Model
Description
TDA100D
APT
T7700 series No
T7300 series
T7100 series
T7000 series PT
T7710
No-LCD, Message Lamp
Yes PS
DECT
TCA155,TCA256,TCA355, CA175、TCA275, etc.
DECT6.0
TD7685,TD7695, TD7996
2.4G
TD7684,TD7694, etc.
Voice Mail
TVM200
TDA100D supports two VM system (12port/24ch)
TVM50
TDA100D supports two VM system (3port/6ch)
Note: There will be some differences between TDA100D and existing TDA/TDE series as follow.
1) SMDR and HOTEL information registration capacity will be increased up to 2500.
2) Broadcasting (Announcement to 31 members) will be activated without MEC.
And no APT series devices can be used with the TDA100D. 26

27. 6. New PCMC

28. 6. New PCMC Dedicated PCMC for TDA100D
Solutions >>
Dedicated PCMC for TDA100D
"Multi-Site PBX Manager“ not supported
The TDA100D has a dedicated PCMC.
This PCMC does not support “Multi-Site PBX Manger”, and is displayed only as the “TDA100D” icon in the “New” window.
On the other hand, a unified PCMC is prepared for the sales companies and dealers that already have an installed current unified PCMC.
This unified PCMC version is V7 or later.
Displayed only as the
"TDA100D" icon
in the "New" window. 28

29. End of Document