Presentation is loading. Please wait.

Presentation is loading. Please wait.

Beginning Fortran Fortran (77) Basics 22 October 2009 *Black text on white background provided for easy printing.

Published byTracy Grant Harrington Modified over 9 years ago

Similar presentations

Presentation on theme: "Beginning Fortran Fortran (77) Basics 22 October 2009 *Black text on white background provided for easy printing."— Presentation transcript:

1 Beginning Fortran Fortran (77) Basics 22 October 2009 *Black text on white background provided for easy printing

2 Example Code Write a program to read in five values of temperature in Fahrenheit and convert to degrees Celsius OR Kelvin OR both.

3 Your Typical Program c234567 PROGRAM MYPROGRAM STOP END Program Options Declaration of Variables MAIN CODE

4 Your Typical Program c234567 PROGRAM MYPROGRAM STOP END Program Options Declaration of Variables MAIN CODE

5 Program Declaration You declare what kind of Fortran file you are writing on the first line. Syntax: c234567 PROGRAM CONVERTF

6 Program Declaration You declare what kind of Fortran file you are writing on the first line. Syntax: c234567 PROGRAM CONVERTF Specifies the file as a program Program name – something short but descriptive

7 Your Typical Program c234567 PROGRAM CONVERTF STOP END Program Options Declaration of Variables MAIN CODE

8 Options and Variables There are numerous options – you can Google them if you are interested In general, there are two kinds: – You can “include” variables from another *.h file by putting include ‘.h’ in the options section. – You can switch on other options about how the code is run (Google it) – We are going to use implicit none

9 Options and Variables All variables we are going to use must be accounted for in the declaration section (no implicit variables allowed) – implicit none What do we need? – Temperature in Fahrenheit, Celsius, Kelvin – Logicals (do we want Celsius, Kelvin, both?) – Some integer to loop through all 5 values – Syntax:

10 Options and Variables c234567 IMPLICIT NONE PARAMETER NT = 5 REAL F(NT) REAL K(NT) REAL C(NT) LOGICAL DOC LOGICAL DOK INTEGER I

11 Options and Variables c234567 IMPLICIT NONE PARAMETER NT = 5 REAL F(NT) REAL K(NT) REAL C(NT) LOGICAL DOC LOGICAL DOK INTEGER I Specify a special parameter – an unchangeable value that can immediately be used (unlike a variable, which can change value)

12 Options and Variables c234567 IMPLICIT NONE PARAMETER NT = 5 REAL F(NT) REAL K(NT) REAL C(NT) LOGICAL DOC LOGICAL DOK INTEGER I Array of 5 REALs for Fahrenheit temps

13 Options and Variables c234567 IMPLICIT NONE PARAMETER NT = 5 REAL F(NT) REAL K(NT) REAL C(NT) LOGICAL DOC LOGICAL DOK INTEGER I Array of 5 REALs for Kelvin temps

14 Options and Variables c234567 IMPLICIT NONE PARAMETER NT = 5 REAL F(NT) REAL K(NT) REAL C(NT) LOGICAL DOC LOGICAL DOK INTEGER I Array of 5 REALs for Celsius temps

15 Options and Variables c234567 IMPLICIT NONE PARAMETER NT = 5 REAL F(NT) REAL K(NT) REAL C(NT) LOGICAL DOC LOGICAL DOK INTEGER I Logical: Do we want to convert to Celsius (TRUE) or not (FALSE)?

16 Options and Variables c234567 IMPLICIT NONE PARAMETER NT = 5 REAL F(NT) REAL K(NT) REAL C(NT) LOGICAL DOC LOGICAL DOK INTEGER I Logical: Do we want to convert to Kelvin (TRUE) or not (FALSE)?

17 Options and Variables c234567 IMPLICIT NONE PARAMETER NT = 5 REAL F(NT) REAL K(NT) REAL C(NT) LOGICAL DOC LOGICAL DOK INTEGER I Integer that counts from 1 to 5 for loop over one-dimensional arrays

18 Your Typical Program c234567 PROGRAM CONVERTF IMPLICIT NONE PARAMETER NT = 5 REAL F(NT) REAL K(NT) REAL C(NT) LOGICAL DOC LOGICAL DOK INTEGER I STOP END MAIN CODE

19 Main Code We need to do several things: – Read in 5 values of temperature – Determine if we need to convert to Celsius, Kelvin, or both – Output values

20 F F From User FiFi FiFi CiCi CiCi KiKi KiKi To User DOC DOK

21 F F From User FiFi FiFi CiCi CiCi KiKi KiKi To User Read in 5 values of F into array DOC DOK

22 F F From User FiFi FiFi CiCi CiCi KiKi KiKi To User For each of the five temperatures (for-loop): DOC DOK

23 F F From User FiFi FiFi CiCi CiCi KiKi KiKi To User Compute C (we are going to do this no matter what, because we know that the output has to either be C or K or both, and we need C in order to calculate K anyway). DOC DOK

24 F F From User FiFi FiFi CiCi CiCi KiKi KiKi To User Output F to user (this should be done just to make sure that the input was read correctly). DOC DOK

25 F F From User FiFi FiFi CiCi CiCi KiKi KiKi To User If DOC = TRUE, then output C as well. DOC DOK

26 F F From User FiFi FiFi CiCi CiCi KiKi KiKi To User If DOK = TRUE, then compute K from C and output to user as well. DOC DOK

27 Main Code F F From User c234567 DO I = 1, NT READ(*,*) F(I) ENDDO

28 Main Code F F From User c234567 DO I = 1, NT READ(*,*) F(I) ENDDO READ is a Fortran command that is used for input. Syntax: READ(, ) Location (*) = read in from the terminal Format (*) = no particular format

29 Main Code F F From User c234567 DO I = 1, NT READ(*,*) F(I) ENDDO WRITE(*,*) ‘Convert to C?’ READ(*,*) DOC WRITE(*,*) ‘Convert to K?’ READ(*,*) DOK

30 Main Code F F From User c234567 DO I = 1, NT READ(*,*) F(I) ENDDO WRITE(*,*) ‘Convert to C?’ READ(*,*) DOC WRITE(*,*) ‘Convert to K?’ READ(*,*) DOK Write to screen with no particular formatting.

31 Main Code c234567 DO I = 1, NT C(I) = (5./9.)*(F(I)-32.) ENDDO

32 Main Code c234567 DO I = 1, NT C(I) = (5./9.)*(F(I)-32.) ENDDO For each temperature:

33 Main Code c234567 DO I = 1, NT C(I) = (5./9.)*(F(I)-32.) ENDDO For each temperature: Compute Celsius temp.

34 Main Code c234567 IF (DOK.EQV..TRUE.) THEN DO I = 1, NT K(I) = C(I) + 273.15 ENDDO ENDIF

35 Main Code c234567 IF (DOK.EQV..TRUE.) THEN DO I = 1, NT K(I) = C(I) + 273.15 ENDDO ENDIF Logical trap: If we want to calculate Kelvin:

36 Main Code c234567 IF (DOK.EQV..TRUE.) THEN DO I = 1, NT K(I) = C(I) + 273.15 ENDDO ENDIF Logical trap: If we want to calculate Kelvin: Loop through temperatures and calculate Kelvin temps. (If DOK =.FALSE., this entire loop is avoided)

37 Main Code c234567 IF ((DOC.EQV..TRUE.).AND. (DOK.EQV..FALSE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, C(I), ‘C’ ENDDO ENDIF c IF ((DOC.EQV..FALSE.).AND. (DOK.EQV..TRUE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, K(I), ‘K’ ENDDO ENDIF c IF ((DOC.EQV..TRUE.).AND. (DOK.EQV..TRUE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, C(I), ‘C ’, K(I), ‘K’ ENDDO ENDIF

38 Main Code c234567 IF ((DOC.EQV..TRUE.).AND. (DOK.EQV..FALSE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, C(I), ‘C’ ENDDO ENDIF c IF ((DOC.EQV..FALSE.).AND. (DOK.EQV..TRUE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, K(I), ‘K’ ENDDO ENDIF c IF ((DOC.EQV..TRUE.).AND. (DOK.EQV..TRUE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, C(I), ‘C ’, K(I), ‘K’ ENDDO ENDIF

39 c234567 PROGRAM CONVERTF IMPLICIT NONE PARAMETER NT = 5 REAL F(NT) REAL K(NT) REAL C(NT) LOGICAL DOC LOGICAL DOK INTEGER I DO I = 1, NT READ(*,*) F(I) ENDDO WRITE(*,*) ‘Convert to C?’ READ(*,*) DOC WRITE(*,*) ‘Convert to K?’ READ(*,*) DOK DO I = 1, NT C(I) = (5./9.)*(F(I)-32.) ENDDO IF (DOK.EQV..TRUE.) THEN DO I = 1, NT K(I) = C(I) + 273.15 ENDDO ENDIF IF ((DOC.EQV..TRUE.).AND. (DOK.EQV..FALSE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, C(I), ‘C’ ENDDO ENDIF c IF ((DOC.EQV..FALSE.).AND. (DOK.EQV..TRUE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, K(I), ‘K’ ENDDO ENDIF c IF ((DOC.EQV..TRUE.).AND. (DOK.EQV..TRUE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, C(I), ‘C ’, K(I), ‘K’ ENDDO ENDIF STOP END

40 Program Start Options/Variable Declaration Main Code Program End c234567 PROGRAM CONVERTF IMPLICIT NONE PARAMETER NT = 5 REAL F(NT) REAL K(NT) REAL C(NT) LOGICAL DOC LOGICAL DOK INTEGER I DO I = 1, NT READ(*,*) F(I) ENDDO WRITE(*,*) ‘Convert to C?’ READ(*,*) DOC WRITE(*,*) ‘Convert to K?’ READ(*,*) DOK DO I = 1, NT C(I) = (5./9.)*(F(I)-32.) ENDDO IF (DOK.EQV..TRUE.) THEN DO I = 1, NT K(I) = C(I) + 273.15 ENDDO ENDIF IF ((DOC.EQV..TRUE.).AND. (DOK.EQV..FALSE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, C(I), ‘C’ ENDDO ENDIF c IF ((DOC.EQV..FALSE.).AND. (DOK.EQV..TRUE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, K(I), ‘K’ ENDDO ENDIF c IF ((DOC.EQV..TRUE.).AND. (DOK.EQV..TRUE.)) THEN DO I = 1, NT WRITE(*,*) F(I), ‘F = ‘, C(I), ‘C ’, K(I), ‘K’ ENDDO ENDIF STOP END

41 Compilation Compilation is performed in the terminal: Syntax: -o

42 Compilation Compilation is performed in the terminal: Syntax: -o Depends on system: f77, g77, pgf77, etc.

43 Compilation Compilation is performed in the terminal: Syntax: -o We wish to create an object that is an executable file with the following name

44 Compilation Compilation is performed in the terminal: Syntax: -o Use this *.f file to compile the executable

45 Compilation Compilation is performed in the terminal: Syntax: -o Also depends on compiler. Some frequent options: Mextend – allows you to go over column 70 in the code Mbounds – if you attempt to reference an array index out of bounds, will notify you Mbyteswapio – some formats require a byte-swap

46 Compilation Compilation is performed in the terminal: Syntax: -o pgf77 –o CONVERTF.exe CONVERTF.f

Download ppt "Beginning Fortran Fortran (77) Basics 22 October 2009 *Black text on white background provided for easy printing."

Similar presentations

Lecture 10 Flow of Control: Loops (Part 2) COMP1681 / SE15 Introduction to Programming.

Lecture 10 Flow of Control: Loops (Part 2) COMP1681 / SE15 Introduction to Programming.
Computer Science 101 While Statement. Iteration: The While-Statement The syntax for the While- Statement is while : The syntax for the While- Statement.

Computer Science 101 While Statement. Iteration: The While-Statement The syntax for the While- Statement is while : The syntax for the While- Statement.
A number of MATLAB statements that allow us to control the order in which statements are executed in a program. There are two broad categories of control.

A number of MATLAB statements that allow us to control the order in which statements are executed in a program. There are two broad categories of control.
Introduction to arrays

Introduction to arrays
Input and Output READ WRITE OPEN. FORMAT statement Format statements allow you to control how data are read or written. Some simple examples: Int=2; real=4.5678.

Input and Output READ WRITE OPEN. FORMAT statement Format statements allow you to control how data are read or written. Some simple examples: Int=2; real=
Chapter 7 Introduction to Procedures. So far, all programs written in such way that all subtasks are integrated in one single large program. There is.

Chapter 7 Introduction to Procedures. So far, all programs written in such way that all subtasks are integrated in one single large program. There is.
CS107 Introduction to Computer Science Lecture 3, 4 An Introduction to Algorithms: Loops.

CS107 Introduction to Computer Science Lecture 3, 4 An Introduction to Algorithms: Loops.
Making Choices in C if/else statement logical operators break and continue statements switch statement the conditional operator.

Making Choices in C if/else statement logical operators break and continue statements switch statement the conditional operator.
Solving Problems with Repetition. Objectives At the end of this topic, students should be able to: Correctly use a while statement in a C# program Correctly.

Solving Problems with Repetition. Objectives At the end of this topic, students should be able to: Correctly use a while statement in a C# program Correctly.
Programming with MATLAB

Programming with MATLAB
Chapter 8 and 9 Review: Logical Functions and Control Structures Introduction to MATLAB 7 Engineering 161.

Chapter 8 and 9 Review: Logical Functions and Control Structures Introduction to MATLAB 7 Engineering 161.
Bellevue University CIS 205: Introduction to Programming Using C++ Lecture 3: Primitive Data Types.

Bellevue University CIS 205: Introduction to Programming Using C++ Lecture 3: Primitive Data Types.
ME1107 Computing 1 2007-2008 Y Yan

ME1107 Computing Y Yan
Chapter 8 Introduction to Arrays Part II Dr. Ali Can Takinacı İstanbul Technical University Faculty of Naval Architecture and Ocean Engineering İstanbul.

Chapter 8 Introduction to Arrays Part II Dr. Ali Can Takinacı İstanbul Technical University Faculty of Naval Architecture and Ocean Engineering İstanbul.
Pseudocode and Algorithms

Pseudocode and Algorithms
Loops – While, Do, For Repetition Statements Introduction to Arrays

Loops – While, Do, For Repetition Statements Introduction to Arrays
1 11/8/06CS150 Introduction to Computer Science 1 Arrays Chapter 8 page 477 November 13, 2006.

1 11/8/06CS150 Introduction to Computer Science 1 Arrays Chapter 8 page 477 November 13, 2006.
Computer Science 1620 Programming & Problem Solving.

Computer Science 1620 Programming & Problem Solving.
CSI 101 Elements of Computing Spring 2009 Lecture #5 Designing with Pseudocode Wednesday, February 4th, 2009.

CSI 101 Elements of Computing Spring 2009 Lecture #5 Designing with Pseudocode Wednesday, February 4th, 2009.
Functions. Program complexity the more complicated our programs get, the more difficult they are to develop and debug. It is easier to write short algorithms.

Functions. Program complexity the more complicated our programs get, the more difficult they are to develop and debug. It is easier to write short algorithms.

Similar presentations

Ads by Google