1. TOPIC-MAKING CONNECTION OF ONE SWITCH AND ONE SOCKET
AIM:-Making Connection of one Switch and one socket circuit board.
Material Required:-1.One 6 Amp Switch
2.One 6 Amp Socket
3.One 3-Pin Plug
4.Flexible Electric wire
5.Switch Board
Tools Required:- Plier and Screw Driver

2. Diagrams of Material /Tools Required
Plier and Screw Driver
Electric Wire
On-Off-Switch
Socket

3. METHOD
1.Fit the On-Off Switch and Socket on the Gang Box (switch board) 2.Connect the Live wire (phase wire) with one point of on-off-switch 3.Connect the other point of on-off-switch with one lower side point of the socket 4.Connect the Neutral Wire with other side lower point of the socket. 5.Connect the Earth wire with top point of the Socket. 6.Take a three pin plug top and connect it with outside wire.

4. THANKS