1. Juan.herranz.alvarez@cern.ch EDMS Nr. 71443916/02/06 100 tons, Platform – Q = 12500 daN, aprox. length to cover 4 m Cabling Groove – Q = 500 daN, aprox. length to cover 30 m E-Cal – Q = 1000 daN, aprox. length to cover 11 m H-Cal – Q = 1000 daN, aprox. length to cover 11 m Cabling groove – Rack + Pillar areas – Q = 500 COVER PLATES FOR GROOVES – OVER VIEW RB 86 RB 84TX 84

2. Juan.herranz.alvarez@cern.ch EDMS Nr. 71443916/02/06 Max. 150 - 160 Min. 140 Standard Groove For Cabling 1100 Think steel plate bolted to the profiles 140 Cabling Groove 100 tons platform CABLING GROOVES - COVER PLATES DESCRIPTION Cabling Groove – Rack and pillar areas 140 Array of pins (250 x 250)  16 4 Standard profiles T- shape Steel plate BTR 5/7 4 Standard profiles HEB 140 reinforced and grounding to the concrete by anchors

3. Juan.herranz.alvarez@cern.ch EDMS Nr. 71443916/02/06 Steel plate BTR 5/7 Steel BTR 5/7 Steel plate BTR 5/7 9803501450 Rails CALORIMETERS - COVER PLATES DESCRIPTION Min. 5 IPE 80 in Each meter + Plate thickness 5 mm Min. 5 IPE 80 in Each meter + Plate thickness 5 mm H-Cal Cover PlateE-Cal Cover PlateInterm. Cover

4. Juan.herranz.alvarez@cern.ch EDMS Nr. 71443916/02/06 COVER PLATES FOR GROOVES – MAIN CHARACTERISTICS Table: 1 the following table summarized the main characteristics for the groves cover plates in the UX 85 Area to coverUniform distributed load – (daN/m^2) Concentrated load on 200 x 200 mm – (daN) Max. plate dimension (mm) Heavier plate element – (daN) Lift-up or remove by: Level after floor (mm) H-Cal Rails400010001450 x 500 x 10050Hand, 2 people 0 E-Cal Rails40001000980 x 500 x 10050Hand, 2 people 0 Cabling groove – old groove for rails 5 and 6 20005001000 x 1130 x 0.550Hand, 2 people 0 Cabling groove – Racks area 20005001000 x 1100 x 0.550Hand, 2 people 0 Cabling groove - 100 tons. platform way -125001000 x 1130 x 25250Crane10 * * Same level as the actual floor on this area