1. WIND POWER

2. Introduction

3.  Energy is a major input for overall socio- economic development of any society  The prices of the fossil fuels steeply increasing  So renewables are expected to play a key role  Wind energy is the fastest growing renewable  Wind turbines are up to the task of producing serious amounts of electricity

4. Principles

5. Uneven heating of earth’s surface and rotation

7. Velocity with Height

8. Power vs. Velocity

9. Lift and drag forces

10. Solidity and Tip speed ratio

11. Performance co-efficient and Betz criterion

12. Potential

13.  Huge potential exists  Available potential can contribute five times the world energy demand  0.4% contribution to total energy

14. Wind is currently the world’s fastest growing energy source

16. Growth of Wind Energy MW Installed Year

18. Wind Energy generating capacity by country, 1980-2003

19. Installed Capacity (MW) in 2005

20. Available potential in India

21. Wind Power Density of India

22. All India Fuel wise Installed Capacity, 2004

24. State wise potential in India, 2005

25. Technology

26. Turbine Evolution Used for Pumping water Grinding grain Mainly used for Generating Electricity

27. Types of turbines VAWT  Drag is the main force  Nacelle is placed at the bottom  Yaw mechanism is not required  Lower starting torque  Difficulty in mounting the turbine  Unwanted fluctuations in the power output

28. HAWT  Lift is the main force  Much lower cyclic stresses  95% of the existing turbines are HAWTs  Nacelle is placed at the top of the tower  Yaw mechanism is required

29. Two types of HAWT DOWNWIND TURBINEUPWIND TURBINE

30. Counter Rotating HAWT  Increase the rotation speed  Rear one is smaller and stalls at high wind speeds  Operates for wider range of wind speeds

31. Offshore turbines  More wind speeds  Less noise pollution  Less visual impact  Difficult to install and maintain  Energy losses due long distance transport

32. A Typical HAWT

33. Turbine design and construction  Blades  Material used  Typical length  Tower height  Heights twice the blade length are found economical

34.  Number of blades  Three blade HAWT are most efficient  Two blade turbines don’t require a hub  As the number increases; noise, wear and cost increase and efficiency decreases  Multiple blade turbines are generally used for water pumping purposes

35.  Rotational control  Maintenance  Noise reduction  Centripetal force reduction  Mechanisms  Stalling  Furling

36.  Yaw Mechanism  To turn the turbine against the wind  Yaw error and fatigue loads  Uses electric motors and gear boxes  Wind turbine safety  Sensors – controlling vibrations  Over speed protection  Aero dynamic braking  Mechanical braking

37. Improvements  Concentrators

38. Future Wind Turbines Wind Amplified Rotor Platform

39. Disc type wind turbine oMuch more efficient than HAWT oRequires less height oLow noise oWorks in any wind direction

40. Economics

41. Determining Factors  Wind Speed  Turbine design and construction  Rated capacity of the turbine  Exact Location  Improvements in turbine design  Capital

42. Wind Speed Matters Assuming the same size project, the better the wind resource, the lower the cost.

43. Size Matters Assuming the same wind speed of 8.08 m/s, a large wind farm is more economical

44. Overall cost distribution

45. Break down of capital cost

46. Energy Cost Trend 1979: 40 cents/kWh  Increased Turbine Size  R&D Advances  Manufacturing Improvements 2004: 3 – 4.5 cents/kWh 2000: 4 - 6 cents/kWh

47. Typical cost statistics  Size: 51 MW  Wind Speed: 13-18 miles/hour  Capital cost: $ 65 million ($1300/MW)  Annual production: 150 million kW-hr  Electricity costs: 3.6-4.5 cents  Payback period: 20 years

48. Economic Advantages

49.  Greater fuel diversity  No delay in construction  Low maintenance costs  Reliable and durable equipment  Additional income to land owners  More jobs per unit energy produced  No hidden costs

51. Future

53. Wind Capital Cost

54. Cost of Wind Energy

55. Germany now and 2020  At present 10% of the country’s energy is supplied by wind energy  By 2020 it is expected to go up to 26%

56. Australia now and 2040

57. So…..  Price of wind power is coming down  There is enormous capacity  Energy storage, however, is still a problem

58. Typical Concerns

59.  Visual impact  Off shore turbines  Arrangement  Avian concerns  Suitable choice of site  Using tubular towers instead of lattice tower  Using radars

60.  Noise  Varies as 5 th power of relative wind speed  Streamlining of tower and nacelle  Acoustic insulation of nacelle  Specially designed gear box  Use of upwind turbines  Reducing angle of attack  Low tip speed ratios

61.  Changes in wind patterns  Reducing turbulence  Intermittent  Coupling with hydro or solar energy  TV, microwave, radar interference  Switching from conducting material to non-conducting and composite material

62. Conclusion

63.  Wind energy is pollution free and nature friendly  Wind energy has very good potential and it is the fastest growing energy source  The future looks bright for wind energy because technology is becoming more advanced and windmills are becoming more efficient

64. THANK YOU

65. Furling