1. Pinch Pots Inlaid slip design Glazing basics

2. The basics Wedge a small piece of clay Make a hole into the center with your thumb Pinch and pull the clay walls to shape your vessel, maintain moisture levels and work in stages of firmness Finish the lip, no cracks The Process

8. Finishing Touches Refine the form Smooth and Refine the lip Foot Smooth the surface

11. Mishima design ideas

14. The Process Carve the DesignClean the Design

15. Apply Slip Let dry to leather and carve

16. Steel woolScrubber

17. Bisque fire, then clear glaze

18. Clear Glaze ONLY AFTER BISQUE FIRING NEVER APPLY GLAZE TO AN UNFIRED POT Clear glaze is pink so you can see where you painted Do not over or under apply, and allow coats to thoroughly dry

19. Vessel 2 : Organic, asymmetrical and glazed

20. Gordon Ward, 2010

21. Jimmy Clark

22. Grading Construction and Performance 75...Excellent and creative construction and performance. 68...Excellent construction and performance. 60...Above average construction and performance. 56...Average construction and performance. 52...Below average constructions and performance. 45...Weak construction and performance. _____II. Glazing 25 points will be graded on the glazed after the glaze fire. Totaling 100 points. PINCH VESSEL TWO 1.Following Objectives………………… 25 2.Composition ……………………………. 25 3.Performance………………………..….. 25 4.Presentation………………………………25 Total………………………………………….... 100