Download presentation
Presentation is loading. Please wait.
Published byFelix Shepherd Modified over 9 years ago
1
Holt CA Course 1 10-1 Three-Dimensional Figures Warm Up Warm Up California Standards California Standards Lesson Presentation Lesson PresentationPreview
2
Holt CA Course 1 10-1 Three-Dimensional Figures Warm Up Identify each two-dimensional figure described. 1. four sides that are all congruent 2. six sides 3. four sides with parallel opposite sides 4. four right angles and four congruent sides rhombus hexagon parallelogram square
3
Holt CA Course 1 10-1 Three-Dimensional Figures Preparation for MG2.1 Use formulas routinely for finding the perimeter and area of basic two-dimensional figures and the surface area and volume of basic three- dimensional figures, including rectangles, parallelograms, trapezoids, squares, triangles, circles, prisms, and cylinders. California Standards
4
Holt CA Course 1 10-1 Three-Dimensional Figures Vocabulary face edge polyhedron vertex base prism pyramid cylinder cone
5
Holt CA Course 1 10-1 Three-Dimensional Figures Three-dimensional figures have three- dimensions: length, width, and height. A flat surface of a three-dimensional figure is a face. An edge is where two faces meet. A polyhedron is a three-dimensional figure whose faces are all polygons. A vertex of a polyhedron is a point where three or more edges meet. The face that is used to name a polyhedron is called a base.
6
Holt CA Course 1 10-1 Three-Dimensional Figures
7
Holt CA Course 1 10-1 Three-Dimensional Figures Additional Example 1: Naming Prisms and Pyramids There is one base, and it is a pentagon. There are five triangular faces. The figure is a pentagonal pyramid. Identify the bases and faces of the figure. Then name the figure. A.
8
Holt CA Course 1 10-1 Three-Dimensional Figures Additional Example 1: Naming Prisms and Pyramids There is one base, and it is a triangle. There are three triangular faces. The figure is a triangular pyramid. Describe the bases and faces of the figure. Then name the figure. B.
9
Holt CA Course 1 10-1 Three-Dimensional Figures Additional Example 1: Naming Prisms and Pyramids There are two bases, and they are both hexagons. There are six rectangular faces. The figure is a hexagonal prism. Describe the bases and faces of the figure. Then name the figure. C.
10
Holt CA Course 1 10-1 Three-Dimensional Figures Check It Out! Example 1 There are two bases and they are both triangles. There are three rectangular faces. The figure is a triangular prism. Describe the bases and faces of the figure. Then name the figure. A.
11
Holt CA Course 1 10-1 Three-Dimensional Figures Check It Out! Example 1 There are two rectangular bases. The figure is a rectangular prism. Describe the bases and faces of the figure. Then name the figure. B. There are four other rectangular faces.
12
Holt CA Course 1 10-1 Three-Dimensional Figures Describe the bases and faces of the figure. Then name the figure. C. Check It Out! Example 1 There are two octagonal bases. The figure is an octagonal prism. There are eight rectangular faces.
13
Holt CA Course 1 10-1 Three-Dimensional Figures Other three-dimensional figures include cylinders and cones. These figures are not polyhedrons because they are not made of faces that are all polygons.
14
Holt CA Course 1 10-1 Three-Dimensional Figures You can use properties to classify three- dimensional figures.
15
Holt CA Course 1 10-1 Three-Dimensional Figures Classify each figure as a polyhedron or not a polyhedron. Then name the figure. A. Additional Example 2: Classifying Three- Dimensional Figures The faces are all polygons, so the figure is a polyhedron. There is one rectangular base for each figure. The figure is made up of a rectangular pyramid and a rectangular prism.
16
Holt CA Course 1 10-1 Three-Dimensional Figures There is one circular base. Classify each figure as a polyhedron or not a polyhedron. Then name the figure. B. Additional Example 2: Classifying Three- Dimensional Figures The faces are not all polygons, so the figure is not a polyhedron. The figure is a cone.
17
Holt CA Course 1 10-1 Three-Dimensional Figures There are two circular bases. Classify each figure as a polyhedron or not a polyhedron. Then name the figure. C. Additional Example 2: Classifying Three- Dimensional Figures The faces are not all polygons, so the figure is not a polyhedron. The figure is a cylinder.
18
Holt CA Course 1 10-1 Three-Dimensional Figures Check It Out! Example 2 Classify each figure as a polyhedron or not a polyhedron. Then name the figure. A. There is one circular base for the top figure and two circular bases for the bottom figure. The faces are not all polygons, so the figure is not a polyhedron. The figure is made up of a cylinder and a cone.
19
Holt CA Course 1 10-1 Three-Dimensional Figures Check It Out! Example 2 Classify each figure as a polyhedron or not a polyhedron. Then name the figure. B. There are two triangular bases for the figure. The faces are all polygons, so the figure is a polyhedron. The figure is a triangular prism.
20
Holt CA Course 1 10-1 Three-Dimensional Figures Check It Out! Example 2 Classify each figure as a polyhedron or not a polyhedron. Then name the figure. C. There is one square base for the figure. The faces are all polygons, so the figure is a polyhedron. The figure is a square pyramid.
21
Holt CA Course 1 10-1 Three-Dimensional Figures Lesson Quiz: Part I Describe the bases and faces of each figure. Then name each figure. Two pentagonal bases, 5 rectangular faces; pentagonal prism One square base, 4 triangular faces; square pyramid 1. 2.
22
Holt CA Course 1 10-1 Three-Dimensional Figures Lesson Quiz: Part II Classify each figure as a polyhedron or not a polyhedron. Then name the figure. polyhedron, rectangular prism polyhedron, triangular prism 3. 4.
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.