1. 111 Dr. Nihad Almughany University of Palestine Faculty of Applied Engineering and Urban Planning Dept. of Architecture 2nd Semester 2009 -2010 Building Construction II (EAAS 3202 ) Lecture 2 Walls– Brick, Wood, Metallic and Other systems

2. 22 Walls – Stone Walls – Review of Last Lecture –Terminology: Bed surface Ashlar masonry Rubble Masonry Course Corner stone – quoins Sill Lintel Jambs Stone arches

3. 33 Walls – Brick Construction –Brick manufacturing –Brick advantages: Regularity of elevations Ease of transportation and use Good to adhere with mortar Fire resistance and resist weather conditions

4. 44 Walls – Brick Construction –Kinds of brick: Bed brick Face brick Refrectory Glazed Sand - lime

5. 55 Walls – Brick Construction –Brick Building Process Brick dimensions : 25 \ 12 \6.5 External walls: 25 cm ( s) \ 38 cm (B) Internal partitions ( 12 cm ) Mortar Courses Pattern of brick building: –Heading Bond –Running Bond –English Bond –Flemish bond

6. 66 Walls – Arches –Using of shuttering –Parts of the arch –Kinds of arches: Segmential Flat Pointed Semicircle

7. 77 Walls – Wood Walls –Skeleton wood walls –Raw wood walls –Panel walls

8. 88 Walls – Other types of walls –Metal Walls –Concrete Walls –Glass Block Walls –Precast Walls –Concrete Block Walls –Curtain Wall –Free Wall

9. 99 Walls – Control Joints –Expansion Joints –Settlement Joints –Construction Joints

10. 10 Walls – Control Joints –Control joints should: Permit slight wall movement without cracks Seal the joint against weather Maintain the wall lateral stability across the joint Details of control joints at walls, floors and roofs