1. Chapter 31 Electromagnetic Oscillations and Alternating Current In this chapter we will cover the following topics: -Electromagnetic oscillations in an LC circuit -Alternating current (AC) circuits with capacitors -Resonance in RCL circuits -Power in AC-circuits -Transformers, AC power transmission (31 - 1)

2. Suppose this page is perpendicular to a uniform magnetic field and the magnetic flux through it is 5Wb. If the page is turned by 30◦ around an edge the flux through it will be: A. 2.5Wb B. 4.3Wb C. 5Wb D. 5.8Wb E. 10Wb

3. A car travels northward at 75 km/h along a straight road in a region where Earth’s magnetic field has a vertical component of 0.50 × 10 −4 T. The emf induced between the left and right side, separated by 1.7m, is: A. 0 B. 1.8mV C. 3.6mV D. 6.4mV E. 13mV

4. L C (31 - 2)

5. L C (31 - 3)

6. L C (31 - 4)

7. 1 2 3 4 5 6 7 8 (31 - 5)

8. (31 - 6)

9. (31 - 7)

10. (31 - 8)

11. L C (31 - 9)

12. (31 - 10)

13. (31 - 11)

14. (31 - 12)

15. O (31 - 13)

16. (31 - 14)

17. O (31 - 15)

18. (31 - 16)

19. Circuit element Average Power ReactancePhase of currentVoltage amplitude Resistor R Current is in phase with the voltage Capacitor C Current leads voltage by a quarter of a period Inductor L Current lags behind voltage by a quarter of a period SUMMARY (31 - 17)

20. (31 - 18)

21. O A B (31 - 19)

22. O A B (31 - 20)

23. (31 - 21)

24. (31 - 22)

25. (31 - 23)

26. Power Station Transmission lines E rms =735 kV, I rms = 500 A home 110 V T1T1 T2T2 Step-up transformer Step-down transformer R = 220Ω (31 - 24)

27. (31 - 25)

28. (31 - 26)

29. (31 - 27)

30. Hitt A generator supplies 100 V to the primary coil of a transformer. The primary has 50 turns and the secondary has 500 turns. The secondary voltage is: A. 1000 V B. 500 V C. 250 V D. 100 V E. 10V

31. hitt The main reason that alternating current replaced direct current for general use is: A. ac generators do not need slip rings B. ac voltages may be conveniently transformed C. electric clocks do not work on dc D. a given ac current does not heat a power line as much as the same dc current E. ac minimizes magnetic effects