1. 950 Watts /1400 VA 120 and 230 Vac models
Powerware P13 and P14 UPS
950 Watts /1400 VA
120 and 230 Vac models
p13pres.ppt rev 02/21/06

2. Agenda Features and Benefits Applications Product Features Overview
Software
Out-of-Box Usability
Collaterals

3. P13 and P14 Product Snapshot
IBM Feature Code 9910-P P14
IBM Part Number 39J J4810*
Topology Line-interactive Line-interactive
Power Rating 950 Watts/1400 VA 950 Watts/1400 VA
Voltage 120 Vac Vac
Frequency 50/60 Hz 50/60 Hz
Configuration Tower Tower
Dimensions (HxWxD) 7.6 x 5.9 x 15.4 in 7.6 x 5.9 x 15.4 in
Weight 37.0 lbs 37.0 lbs
Input Connection 5-15P IEC-320-C14
Output Connection (6) 5-15R (6) IEC-320-C13
Battery Runtime (half/full) 14/5 min 14/5 min
Color Black Black
*RoHS compliant part number. Old IBM part number is 39J2533.

4. P13 and P14 Features and Benefits
Cost-effective power protection for entry to mid-level servers
Eliminates unwanted power quality surprises with Buck and Boost voltage regulation
Single SKU supports i5-iSeries and p5-pSeries, OpenPower with both serial and relay cables included with UPS
Minimizes downtime with hot-swappable batteries
Tested and approved by IBM to assure out-of-box usability
Includes premium IBM warranty which uniquely covers batteries, too

5. P13 and P14 Applications
Cost-effective, entry-level power protection for:
i5 and iSeries servers
p5 and pSeries
OpenPower servers

6. Application Matrix Expected IBM Server Watts Vac P13 P14 Runtime
i5-iSeries
,  10
,  10
p5-pSeries and OpenPower
 10
 10
7028-6E4 p  7
7028-6E4 p  7
7029-6E3 p  16
7029-6E3 P  16

7. Series 5 Power Protection
The Powerware 5115 delivers power protection from power problems that threaten your equipment and priceless data
Power Failures
Power sags
Power surges
Brownouts
Overvoltage
The Powerware 5115 also offers varying degrees of protection against other power problems as well

8. Advanced Battery Management (ABM®) Technology
Increases battery service life by charging only when needed
Optimizes recharge time
Does not trickle charge & starve the electrolyte
Microprocessor controlled – only true and automatic battery check (periodic, controlled discharge) for accurate advanced battery failure protection
Sleep features – no unnecessary battery drain

9. Buck and Boost Voltage Regulation
Wide input voltage window: regulates voltage fluctuations
Regulated output voltage: prevents voltage fluctuations from reaching connected load
Input Voltage to UPS
Output Voltage to Load
+20%
+6%
Nominal Voltage
-10%
-20%

10. Sine Wave Output
When the UPS switches to battery power, it provides smooth sine wave output to the connected load

11. Hot-swappable Batteries
Extends the service life of the UPS by allowing the user to replace batteries without shutting down the connected load

12. Battery Runtime (in minutes)
Watts VA Runtime

13. Simple, User-friendly Interface
Start-On-Battery: Power up UPS in absence of utility power
On/Off Power
Alarm Silence/ Self-Test
UPS Power On
UPS On Battery
Overload
Service Indicator

14. P13 Rear Panel DIP Switches USB Port Network Transient Protector
Site Wiring Fault
Serial Port
(6) 5-15R
Input Overcurrent Protector
6-foot Line Cord w/5-15P

15. P14 Rear Panel USB Port DIP Switches Network Transient Protector
Serial Port
IEC-320, 10A Receptacles1
Input Overcurrent Protector
IEC-320 Input Connector
1 P14 includes three (3) IEC-320-C13 to IEC-320-C m power cords

16. Site Wiring Fault Indicator (P13 model)
UPS verifies that the wall socket to which it is connected is properly wired
Red light illuminates to indicate a problem with the wall socket; either the ground wire connection does not exist or the line and neutral wires are reversed

17. Nominal Voltage Selection: DIP Switches
Select nominal voltage by setting DIP switches
Select 110 or 120V (default) for P13
Select 220, 230 (default), or 240V for P14

18. Network Transient Protector
The P13 offers protection from disturbances that travel through the network (RJ45) and phone lines (RJ11)

19. USB and Serial Communication
UPS is equipped with both USB and serial communication ports (cables for both are included)
Serial Port
USB Port
Single SKU supports i5-iSeries and p5-pSeries systems

20. Powerware Software Suite
The Powerware 5115 includes the exclusive Software Suite CD, incorporating the best power technology with all the control software you need for effective network monitoring and analysis, power management, SNMP and UPS remote shutdown.
Software Suite Contents
LanSafe
CheckUPS Basic
Advanced NetWatch
PowerVision (30-day trial version)
Software Installation Wizard
Takes the guesswork out of UPS software installation
Selects the right software for your system
Links available for new downloads

21. LanSafe PowerScope View
PowerScope view provides a crisp, real-time animation of the power flow through the UPS components
Vital status and metering information is intuitively available at-a-glance
The UPS component topology is automatically detected (line-interactive for P13 and P14)

22. PowerScope View Elements
Toolbar Buttons
Quick-launch most common tasks
Animated UPS topology display
LanSafe Controller name, location and UPS model
Input Voltage Meter
Output Voltage Meter
Battery Run time
Amount of time the UPS can operate on battery power
Load %
The percent of maximum output load the UPS supports. The number increases when new devices are plugged into the UPS
Active Events Log
Advanced Battery Management (ABM)
animated status indicator
Doubles battery life by charging only when necessary

23. Why Use LanSafe Software?
1. Prevent system crashes
When a power failure outlasts the UPS battery run time, LanSafe automatically performs a graceful operating system shutdown.
2. Avoid data loss
LanSafe saves all unsaved work-in-progress.
3. Protect valuable applications
LanSafe protects applications from becoming corrupt by closing them in an orderly fashion.
4. Stay informed
Monitor and receive UPS alarms via network broadcasts, SNMP, , pager or mobile phone.
5. Control the power
Manage all UPSs on the network, turn them on and off, check battery health, create sequential shutdown scenarios, integrate UPSs into SNMP Network Management Systems.

24. Powerware Extensions Software for IBM Director
Seamless UPS and software integration into IBM Director Network Management System (NMS)
Real time monitoring, management and alarm notification of all UPSs in the network: e.g. battery status, battery replacement, load level and metering information
Automatically launches LanSafe and ConnectUPS Web/SNMP Card applications from within Director
Available on Powerware web
FREE-OF-CHARGE

25. P13 and P14 Out-of-Box Usability
9910 philosophy of a complete package
UPS, power1 & communication cables, software, mounting hardware and manuals
1 P14 includes three (3) IEC-320-C13 to
IEC-320-C m power cords

26. P13 and P14 Collateral
Additional information available at
Select your region. Click “Products”, click “9910 Solutions” then click “Powerware pSeries” or “Powerware iSeries”
Materials available
Data sheet
Application overview chart
Product presentation
Documents (manuals)
Communication Options for IBM Applications