1. Date An i>clicker remote is required for this course. You can purchase it through the bookstore. [The remote or a rebate coupon] may be packaged with your text for an additional discount. [Course name]

2. I ask questions on the screen during lecture. You answer using your i>clicker remote. Class results are tallied. I display a graph with the class results on the screen. We discuss the questions and answers. You get points for participating and/or answering correctly! How will we use the clicker?

3. Date 1. Turn on the clicker by pressing the bottom “On/Off” button. 2. A blue “Power” light will appear at the top of the remote. How do you vote?

4. Date 3. When I ask a question in class (and start the timer), select A, B, C, D, or E as your vote. I may also ask you to talk about your possible choice/answer with your neighbor or in groups. How do you vote?

5. Check your “Vote Status” Light: – Green light = your vote was sent AND received. – Red flashing light = you need to vote again. **Not sure you saw the light? Just vote again. **Want to change your vote? You can vote again as long as the timer is still going. How do you know your vote was received?

6. You can earn points for your i>clicker responses for participation and/or answering questions correctly. Until you register your i>clicker, your responses are tied to your clicker remote ID (located on the back of your clicker), rather than to you. When you do register, your previously recorded voting responses will be assigned to you. Registering your i>clicker

7. 1.Go to www.iclicker.com. 2.Click “REGISTER.” 3.Enter these 4 details and click “submit.” IMPORTANT!! You MUST enter your [instructor, enter specific ID name here] ID in the STUDENT ID field to ensure proper crediting. Registering your i>clicker online at www.iclicker.comwww.iclicker.com

8. Your name/ID will scroll down the screen. When you see your name or ID, press the letter shown beside it. Another letter will then appear. Press that second letter. You are registered! Registering your i>clicker in class

9. We are using a different frequency than the default for this class. The frequency we are using is [BA]. At the beginning of each class: Hold your On/Off button for 2 seconds. The blue Power Light will flash. Enter [frequency] Your “Vote Status” light will turn green after you’ve entered this new frequency. Your frequency is now changed for the duration of the lecture & you may vote. When you turn off your remote, it will return to the default frequency of AA. Changing your frequency

10. Other tips If you bought a used clicker, replace the AAA batteries-- all of them. Do not use Duracell as they are TOO short for the casing. Do not use rechargeable batteries. They harm the clicker. Register your clicker by [X date]. Before using a new clicker for the first time, pull the plastic tab out of the battery compartment. Bring your clicker to class every day! Make sure your remote is on when voting! Do not submerge your clicker in liquid and avoid liquid near the clicker. Like most electronics, liquid + your clicker is a bad combination. Check out www.iclicker.com for FAQs.www.iclicker.com Contact support@iclicker.com for help.support@iclicker.com