Download presentation
Presentation is loading. Please wait.
Published byMyrtle Underwood Modified over 9 years ago
1
1 Electrical Safety
2
2 Electrical Hazards & OSHA 29 CFR 1910.303(b)(1) requires: “Electrical equipment shall be free from recognized hazards that are likely to cause death or serious physical harm to employees” Michigan has adapted the appropriate OSHA regulations
3
3 Electrocution Each year, ~9% of fatalities in American workforce is by electrocution while working around electricity. Workplace electrocution hazards: Broken light bulb Frayed cords Exposed wires Water around electrical equipment Crowded outlets
4
4 Voltage Voltage: amount of electrical force (electromotive force) to move electricity between 2 points This is difference of electron and proton potential. Measurement between 2 points can be between “hot” and neutral, or between other charged items Voltage measured in volts
5
5 VOLTS RMS One Cycle Hot Neutral
6
6 Resistance Resistance: measure of opposition of flow of current (opposite of conduction) Measured in Ohms (Voltage/Current) Similar to friction Caused by nature of material or work done Example: A toaster wires get hot due to resistance.
7
Safe Electrical Work Practices Checked for frayed cords Wear correct PPE Use correct tools Turn off unused machines Use non-conducting ladders No water around electrical equipment Grounding 7
8
8 Current Current: amount of electricity that flows in a circuit Measured in amperes (Amps) Milliamp = 1/1000 of amp
9
9 Current There are 2 different types of current: AC- Alternating current (outlets) DC- Direct current (batteries)
10
10 V fib means heart loses meaningful pumping action, thus causing death in a short period of time. This happens when a small current passes either (a) from head to foot, or (b) from hand to foot and thru the heart. Ventricular Fibrillation ~100 milliamperes can cause VF Current between 70-200 milliamperes, if passed through heart, can cause ventricular fibrillation.
11
11 Grounding Ground: Process of achieving earth neutral Common (wired) return path for electrical circuit to ground
12
12 GFCI Ground Fault Circuit Interrupter Prevents electrocution by detecting a ground fault and opening circuit (so our body doesn’t become part of circuit) A type of undercurrent Use: kitchen, bathroom, basement, garage, outside, laundry room Activates at 5-61 mA and 1/25 of second
13
13 GCFI-Receptacle
14
14 Grounded Equipment Never use a plug with a missing ground prong. Always check before plugging into a receptacle.
15
15 Overcurrent Overcurrent - extra amount of current that passes through a circuit Overcurrent protection device opens the circuit (electricity won’t flow) These devices are circuit breakers or fuses.
16
16 Short Circuit A short circuit is when there is a direct contact between “hot” and “neutral”.
17
17 Static Electricity Static electricity - buildup of difference of potential (electric charge) between materials E- move from one object to another when surfaces come into contact (friction) Can ignite vapors Positive Negative
18
18 Extension Cords Extension cords cannot be used: As a substitute for fixed wiring Running through holes Running through doorways, windows, etc. Behind walls, ceiling, or floors Should contain warning labels & rating info (& only be used temporarily)
19
Polarized Plugs One prong slightly wider so can only be inserted one way Allows live and neutral connection safety 19
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.