1. Customer Cabling Regulation Presenter: Ray Bradford

2. SESSION OUTLINE  Cabling in Australia beyond the Carrier’s Network Boundary – Some useful definitions  Progress to date with Self Regulation  Future Directions

3. CUSTOMER CABLING What is Customer Cabling? ACMA has a clear demarcation point between the carrier’s network cabling and the customer’s cabling The carrier’s network cabling finishes at what is known as the Network Boundary It is the cabling beyond the Network Boundary that we call Customer Cabling

4. THE NETWORK BOUNDARY Types of Network Boundaries – The First socket – Network termination Device (NTD) – Network Boundary Distributor (jumperable or patchable frame)

5. MOVE TOWARDS GREATER CABLING INDUSTRY SELF-REGULATION Progress to date:  The ACMA managed cabler licensing scheme has now been replaced by an industry based registration scheme ACMA Technical Standards applicable to Cablers and authorised Manufacturers of Cabling Product are now produced by an industry forum (ACIF) Manufacturers of Cabling Product may carry out their own testing. Australian supplier, rather than ACMA, is now responsible for products compliance folder New industry code – Cabling Requirements for Business developed by industry and registered in 2003

6. FROM LICENSED TO REGISTERED CABLERS In consultation with industry, ACMA developed new customer cabler rules known as Cabling Provider Rules (CPRs) Industry run registration scheme introduced Cablers must undergo adequate training before registering Registration applies to individual cablers

7. CABLING PROVIDER RULES (CPRs) KEY POINTS Applies to the telecommunications, fire, security and data industries. Five independent registrars accredited by the ACMA to provide cabling registration services There are three types of registration: Open, Restricted, and Lift

8. CUSTOMER CABLING WORK The Cabler Must: Be a registered cabler Use only compliant cabling, cabling products and customer equipment Install cabling and cabling product as per the Wiring Rules

9. MOVE TOWARDS GREATER CABLING INDUSTRY SELF-REGULATION Progress to date: The ACMA managed cabler licensing scheme has now been replaced by an industry based registration scheme  ACMA Technical Standards applicable to Cablers and authorised Manufacturers of Cabling Product are now produced by an industry forum (ACIF) Manufacturers of Cabling Product may carry out their own testing. Australian supplier, rather than ACMA, is now responsible for products compliance folder New industry code – Cabling Requirements for Business developed by industry and registered in 2003

10. CABLING STANDARDS KEY POINTS The Australian Communications Industry Forum (ACIF) establishes Working Committees to develop or review technical standards for the cabling industry Two principal standards directly relate to cablers: – AS/ACIF S008: 2006 (Requirements for authorised cabling products); and – AS/ACIF S009: 2006 (The Wiring Rules). Mandatory Standards are enforceable by the ACMA.

11. MOVE TOWARDS GREATER CABLING INDUSTRY SELF-REGULATION Progress to Date: The ACMA managed cabler licensing scheme has now been replaced by an industry based registration scheme ACMA Technical Standards applicable to Cablers and authorised Manufacturers of Cabling Product are now produced by an industry forum (ACIF)  Manufacturers of Cabling Product may carry out their own testing and the Australian supplier, rather than ACMA, is now responsible for products compliance folder New industry code – Cabling Requirements for Business developed by industry and registered in 2003

12. MANUFACTURING & IMPORTING KEY POINTS Manufacturers can now test their Cable and Cabling Product to AS/ACIF S008 in-house, providing they have the facilities and expertise to do so. Previously only test houses accredited with the National Association of Testing Authorities (NATA) could do this. Australian manufacturers, importers, distributors or their agents now manage the products Compliance Folder instead of ACMA. ACMA does random compliance folder audits to ensure compliance.

13. MOVE TOWARDS GREATER CABLING INDUSTRY SELF-REGULATION Progress to date: The ACMA managed cabler licensing scheme has now been replaced by an industry based registration scheme ACMA Technical Standards applicable to Cablers and authorised Manufacturers of Cabling Product are now produced by an industry forum (ACIF) Manufacturers of Cabling Product may carry out their own testing. Australian supplier, rather than ACMA, is now responsible for products compliance folder  New industry code – Cabling Requirements for Business developed by industry and registered in 2003

14. INDUSTRY CODE – Cabling Requirements for Business KEY POINTS Places obligations on cabling businesses that contract or employ two or more cablers Ensures that cabling installation and maintenance practices comply with the Wiring Rules and the applicable standards for cabling product Promotes client safety and network integrity Provides an incentive for self-regulation and compliance

15. Breakdown of violations, by violation type for 2004-05

16. REQUIREMENTS OF THE CODE Mandatory provisions: All cabling businesses are subject to the Code Rules ensuring: - All cablers are registered or under supervision - Cabling records are retained - Cabling work complies with applicable cabling rules & standards - Co-operation with ACMA

17. REQUIREMENTS OF THE CODE Voluntary provisions: Businesses may elect to become Code signatories to the Guidelines of the Code Code signatories must demonstrate their quality systems to an accredited assessor

18. ASSESSMENT UNDER THE CODE KEY POINTS ACMA has accredited four organisations (to date) to provide independent, third party assessments of cabling businesses wishing to sign up to the Code Cabling businesses are assessed on: - Quality systems that ensure compliance; - Cabler skills maintenance programs; - Cabling work documentation practices; - Third party references; and - Affiliation with an industry association

19. Consumer information ACMA raises consumer awareness of cabling regulation by: - consumer information brochures - consumer fact sheets - Adverts and articles in popular magazines - ACMA web site Consumers are encouraged to: - check the registration card of the cabler - ask for a job completion form

20. What do Consumers need to know? Availability of local cabling provider Quality of service offered by each provider That they have a choice of cabling provider Technical competence of cablers to do the work Accountability of the provider to fix any problems

21. REFERENCE MATERIAL BROCHURES: - So you want to become a registered cabler? - Telecommunications Cabling Provider Rules - Industry Code – Cabling Requirements for Business Website: www.acma.gov.au - click on: Industry > Telecommunications > Cablingwww.acma.gov.au

22. Contact Details Ray Bradford Phone:61-3-9963 6932 E-mail: ray.bradford@acma.gov.au Fax:61-3-9963 6970 Website: www.acma.gov.auray.bradford@acma.gov.auwww.acma.gov.au