1. Washington Laboratories (301) 417-0220 web: www.wll.com7560 Lindbergh Dr. Gaithersburg, MD 20879 Dispelling the CE Mark Myth: What’s Required for European Compliance December 12, 2003

2. What is EMC? EMC: Electromagnetic Compatibility Emissions: Unwanted radiated and conducted electrical energy Immunity: Undesirable response to external electrical energy EMI: Electromagnetic Interference

3. Elements of an EMI Situation Source "Culprit" Coupling method "Path" Sensitive device "Victim" SOURCE PATH VICTIM

4. How Does EMI Affect Electronics? Radiated and conducted interference Conducted Interference Enters and Exits Equipment through Wiring and Cabling Radiated Interference Enters and Exits Equipment through Wiring and Enclosure Penetration Radiated SusceptibilityRadiated Emissions Conducted Susceptibility Conducted Emissions

5. Radiated Coupling Field to Cable Patient Monitor Loop Area Induced Current Electromagnetic WaveRadio VCMVCM

6. Interference to TV Reception Two Interfering Signals Injected into TV No Interference

7. Transients Electrostatic Discharge & Transient Pulses ESD can induce “glitches” in circuits, leading to false triggering, errors in address & data lines and latch-up of devices Upset Damage Degradation leading to future failure(s)

8. PERSONAL COMPUTERS & PERIPHERALS, RADIO RECEIVERS Method #1Test at Approved Laboratory Test Product at approved Laboratory Report with Technical Information Declaration of Conformity Sell Product Declaration of Conformity. Does not go to the FCC

9. RADIO TRANSMITTERS Examples Cordless Phones, Radio Transmitters, CB Radios, Wireless Products CERTIFICATION: Test Product Report with Technical Information Send Report and Application to FCC or TCB FCC GRANT with FCC ID Number Sell Product

10. EUROPEAN REQUIREMENTS

11. Top US Markets

12. OVERVIEW OF EUROPEAN REQUIREMENTS Terms and Definitions Comparison with US Standards Options for Conformity Technical Requirements Use of the CE Mark

13. TERMS & DEFINITIONS European Directive Legal Document adopted by EC Council of Ministers Must be adopted into National Law by each EC member state Does not call out technical standards; refers to private standards-making bodies to draw up product standards European Norm (EN) Harmonized Standard: Common Standard used for determining conformity Committee process ENs based on existing standards (CISPR, IEC) Must be adopted into National Standards by each EC Member state CENELEC ( Comite Europeen de Normalisation Electrotechnique) European Committee for Electrotechnical Standardization: responsible for generating European Norms CE: Communaute Europeenne

14. REASONS FOR COMPLIANCE Regulatory Requirements Domestic EMC: FCC Requirements Penalties: $7000/occurrence Bellcore European: EMC: EMC Directive Military/Aerospace Functionality and Mission Success

15. NEW APPROACH DIRECTIVES Objective: Elimination of Technical Barriers New Approach calls out Essential Requirements Technical Details Left to Committees Harmonization of European Norms (Standards) CENELEC Conformity to European Norms demonstrates compliance Products meeting essential requirements eligible for CE Marking

16. EUROPEAN DIRECTIVES Directive Low Voltage (73/23/EEC) Amended by 93/68/EEC Simple Pressure Vessels (87/404/EEC) Amended by 90/488/EEC Toy Safety (88/378/EEC) Amended by 93/68/EEC Construction Products (89/106/EEC) Amended by 93/68/EEC EMC (89/336/EEC) Amended by 93/68/EEC Machinery (89/392/EEC) Amended by 93/68/EEC Personal Protective Equipment (89/686/EEC) Non-Automatic Weighing Instruments (90/384/EEC) Amended by 93/68/EEC Gas Appliances (90/396/EEC) Amended by 93/68/EEC Telecommunications Terminal Equipment (91/263/EEC) Amended by 93/68/EEC Hot Water Boilers (92/42/EEC) Amended by 93/68/EEC Medical Devices (93/42/EEC) Satellite Earth Station Equipment (93/97/EEC) Explosive Atmospheres (94/9/EEC) Recreational Craft (94/25/EEC) Radio and Telecommunications Terminal Equipment Directive Mandatory Date: 1/1/97 7/1/92 1/1/97 1/1/96 1/1/95 6/30/95 1/11/02 1/1/95 1/1/96 1/1/97 6/13/98 NONE 6/30/03 6/15/98 4/1/01

17. THE EMC DIRECTIVE 89/336/EEC: The EMC Directive Adopted 1989 by Council of the European Communities Original Implementation 1 January 1992 Amended by 92/31/EEC Affects all products to be placed on the Market Calls out essential “protection requirements” which include emissions as well as susceptibility Does not call out specifications or standards “New Approach Directive” Essential Protection Requirements Allows Self-Certification ”CE” Marking certifying product’s conformance

18. APPLICATION OF THE EMC DIRECTIVE “Electrical Apparatus” Covered Exceptions: components, large installations and devices that must comply with other Directives that address EMC (e.g., telecommunications) Member states adopt ENs Penalties for non-compliance Country-by-Country basis. Example: UK Requirements: Fines up to £5000 Up to 3 months imprisonment for misuse of CE mark Forfeiture of equipment

19. COMPLIANCE WITH EUROPEAN DIRECTIVES Product-Specific Standards or use Generic Standards Use Generic Requirements if Product- Specific Standards do not exist Conformity Assessment Options Declaration of Conformity Technical Construction File

20. CE Marking Implementation of the CE Marking: Must be affixed to: Product Packaging Instructions for use, OR Guarantee certificate Can be used with other marks providing they do not reduce the visibility and legibility of the mark The marking may include: The identification of a notified body involved in assessment

21. R&TTE Covers the following aspects: Efficient use of spectrum EMC Safety

22. R&TTE Approval Process CE Marking by manufacturer is allowed Self-Declaration for many products Reduced approval procedures and processes Harmonized standards developed Faster, cheaper, more market coverage for SME

23. CONDUCTED EMISSIONS TESTING Measure Noise on Power Line Spectrum Analyzer LISN Product Power Cord

24. RADIATED EMISSIONS TESTING Test Site: Measure Radiated Noise from Equipment Case and Cables Measuring Antenna Product 3 m or 10 m Spectrum Analyzer Open Area Test Site Turntable

25. RADIATED EMISSIONS TESTING Test Site: Measure Radiated Noise from Equipment Case and Cables Measuring Antenna Product 3 m or 10 m Photos: EMC Test System, Austin, TX emctest.com Spectrum Analyzer Open Area Test Site Turntable

26. Typical Ambient Profile Switching noise Cell phone FM Radio

27. Immunity Test Requirements 1000-4 Series IEC 61000-4-1: Introduction IEC 61000-4- 2: Electrostatic Discharge Requirements IEC 61000-4- 3: Radiated Immunity IEC 61000-4- 4: Electrical Fast Transient IEC 61000-4- 5: Surge IEC 61000-4- 6: Conducted RF Immunity IEC 61000-4-7: Interharmonics IEC 61000-4-8 & 9: Magnetic field immunity IEC 61000-4-10: Damped Oscillatory pulsed field immunity IEC 61000-4-11: Dips & Interrupts (“power quality”) IEC 61000-4-12: Damped Oscillatory (surge)

28. ESD Testing ESD Simulator

29. Anechoic Chamber www.emctest.com

30. EFT Testing EFT Clamp EFT Generator Ground Plane

31. Surge Coupling Lightning and pulse sources cause high- energy transients into power and data cables Indirect Direct

32. Voltage Dips & Interrupts IEC 1000-4-11 Simulates brownouts and blackouts on equipment operation Voltage Dip: Voltage Interrupt:

33. A Tester’s Perspective Radiated Emissions: Consumes at least 1/2 of all testing and re-engineering time required for passing most EMC programs Most Common Failures (in approximate order of occurrence): 1. Radiated Emissions 2. Conducted Emissions 3. ESD 4. Radiated and/or conducted immunity 5. Surge 6. EFTs

34. Reach us Washington Laboratories, Ltd. 7560 Lindbergh Drive Gaithersburg, Maryland 20879 Phone: 800/839-1649 Fax: 301/417-9069 Email: info@wll.com www.wll.com