Presentation is loading. Please wait.

Presentation is loading. Please wait.

ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 1 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Bruce Mayer, PE Licensed.

Published byGrant Webb Modified over 9 years ago

Similar presentations

Presentation on theme: "ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 1 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Bruce Mayer, PE Licensed."— Presentation transcript:

1 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 1 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege.edu Engineering 43 Sequential (FlipFlop) Logic

2 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 2 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis But First… WhiteBoard Work  For the Truth Table Shown at right Construct the Karnaugh Map Write The Minimized Function Q(A,B,C,D) Draw the Logic Circuit  Notice “1’s” in Rows 1, 5, 9, 13, 14, 15 –Need only put “1’s” in these locations; other cells Assumed to be Zero Row ABCDQ 0 00000 1 00011 2 00100 3 00110 4 01000 5 01011 6 01100 7 01110 8 10000 9 10011 10 10100 11 10110 12 11000 13 11011 14 11101 15 11111

3 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 3 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Blank Map (NonStretching) AB\CD00011110 00 011 11 10 AB\CD00011110 00 A’B’C’D’A’B’C’DA’B’CDA’B’CD’ 01 A’BC’D’A’BC’DA’B’CDA’B’CD’ 11 ABC’D’ABC’DABCDABCD’ 10 AB’C’D’AB’C’DAB’CDAB’CD’

4 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 4 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Stretchable Blank Map

5 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 5 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis More… WhiteBoard Work  Implement This Function using ONLY NAND Gates  An Example of NAND-Gate Synthesis NANDS are easier to construct than ANDs, ORs, NORs –NANDs are the preferred gate for logic circuits

6 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 6 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis “Memory Filled” Logic  The Invert/AND/OR Combinatorial Logic Circuits depended ONLY on the Current Inputs; previous states did Not affect the Current State Combinatorial Logic is MEMORYLESS  In SEQUENTIAL Logic the Circuit Output CAN Depend on the Previous condition of the Circuit Sequential Logic has MEMORY

7 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 7 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Sequential Circuit  A sequential circuit consists of a feedback path, and employs some memory elements  [Sequential circuit] = [Combinational logic] + [Memory Elements] Combinational logic Memory elements Combinational outputs Memory outputs External inputs

8 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 8 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Synchronous vs Asynchronous  Almost all Logic “Chips” Include a Clock  The Clock helps to “Synchronize” the Operation of the Circuits.  The “Clock” is simply a very regular Hi/Lo Pulse train   Logic Forms are divided into two groups: SYNCHRONUS → Depend on Clock Asynchronous → NO Clock-Dependency

9 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 9 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Asynchronous S-R FlipFlop  Cross-coupled NOR gates Similar to inverter pair, with capability to force Q to 0 (reset=1) or 1 (set=1) R S Q Q' R S Q 0 1 0 1 R S Q 1 0 1 0 R S Q n-1 0 0 R S Q Q' ?? 1 1

10 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 10 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis NAND based SR FlipFlop  Cross-coupled NAND gates Similar to inverter pair, with capability to force Q to 0 (reset=0) or 1 (set=0) R' S' QQ Q' S' R' NOR notes  Any HI input → LO output Any HI → LO  All LO inputs → HI output All LO → HI  Any LO input → HI output Any LO → HI  All HI inputs → LO output All HI → LO NAND notes

11 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 11 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis State Behavior of SR FlipFlop  Transition Table  Sequential (output depends on history when inputs R=0, S=0) but asynchronous R S Q Q' SRQ n-1 Q n 0000 0011 0100 0110 1001 1011 110X 111X hold reset set not allowed characteristic equation Q n = S + R’∙Q n-1 SETREset

12 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 12 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis SR FlipFlop Timing Behavior Reset Hold Set Reset Race R S Q Q’ 100 R S Q Q'  “Races” Produce UnPredictable OutPuts  Any HI input → LO output Any HI → LO  All LO inputs → HI output All LO → HI

13 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 13 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Clocked SR FlipFlop  Control times when R and S inputs matter Otherwise, the slightest glitch on R or S while enable is low could cause change in value stored Ensure R & S stable before utilized (to avoid transient R=1, S=1)

14 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 14 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Clocked SR FlipFlops  NOR-NOR Implementation  Truth Table For NOR: any-Hi→LO; ALL-LO→Hi R’S’En’RSQnQn 00011NotAllowed 01010Reset to 0 10001Set to 1 11x00Q n−1 xx100 x → Don’t Care

15 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 15 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Clocked SR FlipFlops  NAND-NOR Implementation  Truth Table RSCQnQn 00xQ n−1 011Set to 1 101Reset to 0 111NotAllowed xx0Q n−1 x → Don’t Care Circuit Symbol

16 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 16 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis SR FlipFlop Clock-Overide  Sometimes Need to Set or Reset the FlipFlop withOUT Regard to the Clock  Note the position of Pr & Cl on the 3 rd -Stage ORs (any Hi→Hi) Ensures Pr & Cl OverRide R, S, & C

17 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 17 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Edge Triggered D FlipFlop  sensitive to inputs only near edge of clock signal (not while steady ) Q D Clk=1 R S 0 D’ 0 D Q’ holds D' when clock goes low holds D when clock goes low

18 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 18 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Edge-Triggered FlipFlop Flavors Edge-Triggered FlipFlop Flavors  POSITIVE edge-triggered Inputs sampled on RISING edge; outputs change after RISING edge  NEGATIVE edge-triggered flip-flops Inputs sampled on falling edge; outputs change after falling edge positive edge-triggered FF negative edge-triggered FF D CLK Qpos Qpos' Qneg Qneg' 100

19 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 19 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Edge Triggered D FlipFlop  4-NAND, 1-NOT implementation  Truth Table for All Postive-Going Edge D-FF’s NAND: –any LO → Hi –All HI → LO CLKDQnQn 0xQ n−1 1x ↑00 ↑11

20 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 20 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Edge Triggered JK FlipFlop  A “Toggling” Flip Flop Under A certain Control-Set: Q → Q’ –Notice that Q does NOT go HI-for-sure or LO-for-sure, and it does NOT remain STEADY  A NAND Nest: Circuit Symbol

21 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 21 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis JK FlipFlop Toggle TruthTable  The Simplified Ckt  Note that the outputs feed back to the enabling NAND gates. This is what gives the toggling action when J=K=1  ReCall NAND Any LO → Hi ALL Hi → LO CJKQnQn Notes 0xxQ n−1 No Chg 1xxQ n−1 No Chg ↓00Q n−1 No Chg ↓010Reset to 0 ↓101Set to 1 ↓11Q’ n−1 TOGGLE

22 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 22 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Cascading FF → Shift Register  Serial-in/Parallel-out Shift register New value goes into first stage While previous value of 1 st stg goes into 2 nd stg The Q N can be SAMPLED any time CLK IN Q0Q1 DQDQOUT

23 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 23 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Example: Eliminate Inconsistency DQ DQ Q0 Clock Q1 Async Input Clocked Synchronous System is asynchronous and fans out to D0 and D1 one FF catches the signal, one does not inconsistent state may be reached! In Q0 Q1 CLK DQ DQ Q0 Clock Q1 Async Input DQ Synchronizer Want to Send SAME Input Value to TWO Places

24 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 24 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis FlipFlops Summarized  Development of D-FF Level-sensitive used in custom integrated circuits –can be made with 4 pairs of gates –Usually follows multiphase non-overlapping clock discipline Edge-triggered used in programmable logic devices –Good choice for data storage register

25 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 25 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis FlipFlops Summarized  Historically J-K FF was popular but now never used Similar to R-S but with 1-1 being used to toggle output (complement state) Same Operation Can always be implemented using D FlipFlops  Preset and Clear inputs are highly desirable on flip-flops Used at start-up or to reset system to a known state

26 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 26 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis FlipFlops Summarized  Reset (set state to 0)  R Synchronous: D new = R' D old –Transition only when next clock edge arrives Asynchronous: doesn't wait for clock, –quick but dangerous  Preset or Set (set state to 1)  S Synchronous: D new = D old + S –Transition only when next clock edge arrives) Asynchronous: doesn't wait for clock –quick but dangerous

27 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 27 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis WhiteBoard Work  Use Gates and a D- FF to Implement the JK-FF operation CJKQnQn Notes 0xxQ n−1 No Chg 1xxQ n−1 No Chg ↓00Q n−1 No Chg ↓010Reset to 0 ↓101Set to 1 ↓11Q’ n−1 TOGGLE

28 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 28 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis All Done for Today IEEE 91-1984 Gates

29 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 29 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege.edu Engineering 43 Appendix Logic Syn

30 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 30 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis

31 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 31 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis

32 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 32 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis NAND Gate Synthesis  With the expression in SOP form 1.After any need inversions; In the first logic level there are as many logic gates as terms in the SOP expression 2.Each gate corresponds to a SINGLE Term, and has, as inputs, the variables in that term 3.The outputs of the First Logic-Level are ALL inputs to a SINGLE (multi-input if needed) NAND gate

33 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 33 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis

34 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 34 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis

35 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 35 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis

36 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 36 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis

37 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 37 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis

38 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 38 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis

39 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 39 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis

40 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 40 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis

41 BMayer@ChabotCollege.edu ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 41 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis

Download ppt "ENGR-43_Lec-05c_Thevenin_AC_Power.pptx 1 Bruce Mayer, PE Engineering-43: Engineering Circuit Analysis Bruce Mayer, PE Licensed."

Similar presentations

11/12/2004EE 42 fall 2004 lecture 311 Lecture #31 Flip-Flops, Clocks, Timing Last lecture: –Finite State Machines This lecture: –Digital circuits with.

11/12/2004EE 42 fall 2004 lecture 311 Lecture #31 Flip-Flops, Clocks, Timing Last lecture: –Finite State Machines This lecture: –Digital circuits with.
Sequential Logic ENEL 111. Sequential Logic Circuits So far we have only considered circuits where the output is purely a function of the inputs With.

Sequential Logic ENEL 111. Sequential Logic Circuits So far we have only considered circuits where the output is purely a function of the inputs With.
Sequential Digital Circuits Dr. Costas Kyriacou and Dr. Konstantinos Tatas.

Sequential Digital Circuits Dr. Costas Kyriacou and Dr. Konstantinos Tatas.
1 Lecture 14 Memory storage elements  Latches  Flip-flops State Diagrams.

1 Lecture 14 Memory storage elements  Latches  Flip-flops State Diagrams.
Give qualifications of instructors: DAP

Give qualifications of instructors: DAP
COE 202: Digital Logic Design Sequential Circuits Part 1 Dr. Ahmad Almulhem Email: ahmadsm AT kfupm Phone: 860-7554 Office: 22-324 Ahmad Almulhem, KFUPM.

COE 202: Digital Logic Design Sequential Circuits Part 1 Dr. Ahmad Almulhem ahmadsm AT kfupm Phone: Office: Ahmad Almulhem, KFUPM.
ECE C03 Lecture 81 Lecture 8 Memory Elements and Clocking Hai Zhou ECE 303 Advanced Digital Design Spring 2002.

ECE C03 Lecture 81 Lecture 8 Memory Elements and Clocking Hai Zhou ECE 303 Advanced Digital Design Spring 2002.
1 Sequential Ckts, Latches and Timing Issues Today: Sequential Circuits, LatchesFirst Hour: Sequential Circuits, Latches –Section 6.1.1 of Katz’s Textbook.

1 Sequential Ckts, Latches and Timing Issues Today: Sequential Circuits, LatchesFirst Hour: Sequential Circuits, Latches –Section of Katz’s Textbook.
CHAPTER 3 Sequential Logic/ Circuits.  Concept of Sequential Logic  Latch and Flip-flops (FFs)  Shift Registers and Application  Counters (Types,

CHAPTER 3 Sequential Logic/ Circuits.  Concept of Sequential Logic  Latch and Flip-flops (FFs)  Shift Registers and Application  Counters (Types,
Classification of Digital Circuits  Combinational. Output depends only on current input values.  Sequential. Output depends on current input values and.

Classification of Digital Circuits  Combinational. Output depends only on current input values.  Sequential. Output depends on current input values and.
Multiplexors Sequential Circuits and Finite State Machines Prof. Sin-Min Lee Department of Computer Science.

Multiplexors Sequential Circuits and Finite State Machines Prof. Sin-Min Lee Department of Computer Science.
Module 12.  In Module 9, 10, 11, you have been introduced to examples of combinational logic circuits whereby the outputs are entirely dependent on the.

Module 12.  In Module 9, 10, 11, you have been introduced to examples of combinational logic circuits whereby the outputs are entirely dependent on the.
Sequential Logic Latches & Flip-flops

Sequential Logic Latches & Flip-flops
1 Lecture 20 Sequential Circuits: Latches. 2 Overview °Circuits require memory to store intermediate data °Sequential circuits use a periodic signal to.

1 Lecture 20 Sequential Circuits: Latches. 2 Overview °Circuits require memory to store intermediate data °Sequential circuits use a periodic signal to.
Page 1 Sequential Logic Basic Binary Memory Elements.

Page 1 Sequential Logic Basic Binary Memory Elements.
Circuits require memory to store intermediate data

Circuits require memory to store intermediate data
Dr. ClincyLecture1 Appendix A – Part 2: Logic Circuits Current State or output of the device is affected by the previous states Circuit Flip Flops New.

Dr. ClincyLecture1 Appendix A – Part 2: Logic Circuits Current State or output of the device is affected by the previous states Circuit Flip Flops New.
EET 1131 Unit 10 Flip-Flops and Registers

EET 1131 Unit 10 Flip-Flops and Registers
EKT 124 / 3 DIGITAL ELEKTRONIC 1

EKT 124 / 3 DIGITAL ELEKTRONIC 1
INTRODUCTION TO SEQUENCIAL CIRCUIT

INTRODUCTION TO SEQUENCIAL CIRCUIT

Similar presentations

Ads by Google