1. THE ZAMBIAN SEISMIC NETWORK 2009 IRIS/ORFEUS METADATA WORKSHOP BEING HELD IN NOVEMBER IN CAIRO, EGYPT FROM 8-17 NOVEMBER 2009 By A Mulowezi

2. LOCATION OF ZAMBIA 2 Area: total: 752,618 sq km POPULATION: 12.1Million

3. 3 BACKGROUND ZAMBIAN SEISMIC NETWORK The Government of the Republic of Zambia, through Geological Survey Department operates and maintains a network of five seismic stations. These stations were established way back from 1983 – 1985 with the help from Finland (FINNIDA) these comprises of Lusaka (LSZ) which is the main station and a dial-up the rest are remote these includes Petauke (PTZ) Mansa (MZZ) Isoka (IKZ) and Kasempa (KMZ) all with international codes. It also operates and maintains three Africa Array seismic stations, two are permanent and one temporal. The permanent are Kitwe (KTWE) and Itezhitezhi (TEZI). Mongu (MONG) is temporal. Although Mongu at the moment is still temporal, the Zambian Government has the intention of putting up a permanent structure. The Department hopes to strengthen the Zambian Seismic Network in the Country and for this reason it has procured three more Broadband seismic stations to revamp three other remote stations which were previously installed/ run by FINNIDA but due to some financial constraint the stations were run down and could not be maintained.

4. 4 SEISMIC MONITORING IN ZAMBIA Currently there are five seismic stations working in Zambia though Government is in the process of installing the other two procured stations from Gulrap. These are Lusaka (LSZ) main which is being run in collaboration with United States Geological Surveys (USGS) and Comprehensive Nuclear Test Ban Treaty (CTBTO). The other three are Africa Array seismic stations namely Kitwe (KTWE), Itezhitezhi (TEZI) and Mongu(MONG). Petauke (PTZ) has just been reinstalled.

5. Map showing station distribution 5

6. Location and Instruments used in Stations 6

7. 7 LUSAKA SEISMIC STATION IN KAPOPO VILLAGE SEISMOMETER AND DATA ACQUISITION HOUSE WITH SOLAR POWER Seismometer and recorder house Solar and ac powered Security razor wire fence

8. 8 OVERVIEW OF KAPOPO SEISMIC STATION OVERVIEW OF KAPOPO SEISMIC STATION –Location of Antenna and equipment: Antenna Site Indoor Equipment Location –Cable Run, Grounding and Power –General Information Outdoor environment Access to site Housing facilities Specialised equipment Transportation to site Communications Personnel accommodation Onsite facilities Special permission to install VSAT –Networking –Coordination issues Manned/unmanned station Site preparation (civil works) VSAT shipment

9. 9 Waveform from LSZ (AS119)

10. 10 ZAMBIA NDC (N192) (1) Indoor equipment (2) Data receiving computer (3) Data processing computer 1 23

11. 11 ZAMBIAN NDC (N192) (1) Geological Survey Department hosts the Zambia NDC (N192) (2) Chemistry building atop which the VSAT is anchored (3) Geophysics and seismic building houses the Zambia NDC (N192) 1 2 3

12. STATION PREPERATION 12

13. MONGU TEMPROL SEISMIC STATION DATA ACQUISITION AND DATA LOGER BEING TESTED DATA ACQUISTION AND DATA LOGER BEING ASSEMBLED THE VAULT BEING DUG 13

14. MONGU TEMPRAL STATION SENSOR,BATTERIES,DAT A LODGER AND POWER BOARD INSTALLED GURALP SENSOR 14

15. 15 LUSAKA SEISMIC STATION – AS119 Seismometer (s) Concrete pier (p) Quantera Data Acquisition System (q- das) Accelerometer (a) Insulation (i) CTBTO (c) USGS (u) Monitor (m) s p i a q-das m c u

16. Benefits Zambia through these stations have been able to get data for use to end users Through cooperating partners some members of staff has been trained up to Msc level Technical staff at NDC have been attending training Courses coupled with introductory workshops and seminars Acquisition of application software's (in a Box) Dimas and Seisan for analysis Accessing data for the end users has been made possible

17. 17 The End Thank You