Presentation is loading. Please wait.

Presentation is loading. Please wait.

PRESENTED BY ILAMVAZHUTHI.C 1 Under the guidance of Mr.S.CHOKALINGAM M.E (Assistant professor) DEPARTMENT OF MECHANICAL ENGINEERING E.G.S.PILLAY ENGINEERING.

Similar presentations


Presentation on theme: "PRESENTED BY ILAMVAZHUTHI.C 1 Under the guidance of Mr.S.CHOKALINGAM M.E (Assistant professor) DEPARTMENT OF MECHANICAL ENGINEERING E.G.S.PILLAY ENGINEERING."— Presentation transcript:

1 PRESENTED BY ILAMVAZHUTHI.C 1 Under the guidance of Mr.S.CHOKALINGAM M.E (Assistant professor) DEPARTMENT OF MECHANICAL ENGINEERING E.G.S.PILLAY ENGINEERING COLLEGE NAGAPATTINAN

2 Optimization of MIG and TIG Welding Parameter To Increase The Tensile Strength in HAZ Using Various Destructive,Non destructive test and Finet element analysis.

3  In this competitive world, the customers perceive the most reliable high quality with low cost product. In order to satisfy the customers demand, the manufacturing industries are being forced to continuously optimize their process parameters. Gas metal arc welding famously abbreviated MIG and TIG is one of the most important metals joining process in manufacturing industries. The selection of improper MIG and TIG process parameter increases the power consumption, material consumption, man power and cost of the product decreasing the weld quality. Here in our project we are done a experiment with pure TIG welding for a root and MIG welding for run to perform experiment

4  This project work is part of program for the development of new EN8 and OHNS steels to increase mechanical properties and minimization of metallurgical defects to increasing weldment. The quality of weld in MIG and TIG mainly influenced by independent variables such as welding current, speed of electrode and electrode stick out. The prediction of process involved in MIG and TIG is a very complex. NDT and DT can performed in this research

5  Welding may be defined as the process of joining similar or dissimilar metals by the application of heat with or without addition of filter metal in such a way that the result is continuity of homogeneous material.

6  The customers perceive the most reliable high quality with low cost product  The selection of improper MIG and TIG process parameter increases the power consumption, material consumption, man power and cost of the product.  In this project we will be made many attempts for made test pieces to predict parameter of MIG for getting maximum surface finish, tensile strength and min HAZ

7  Arc welding, Gas welding, Resistance welding, Thermit welding  Arc welding  Carbon arc  Metal Arc  MIG  TIG  Atomic hydrogen  Plasma Arc  Submerged Arc

8  In this type of arc welding the consumable electrode is supplied continuously. The electrode is vied as filler metal and to product arc when DC supply is given, an electric arc is produced between the consumable electrode and the work piece. An inert gas like argon or helium is passed at the welding place through nozzle. The inert gas products a gas shield around the electric arc. This prevents the molten metal to react with atmospheric air. The edges of the work piece are melted by the electric arc and joined together to give weld.

9  Aluminium, Stain less steel, magnesium and nickel alloys can be welded by this method Advantages No flux is needed Welding speed is high Quality welding joint can be obtained

10  This method is similar to MIG welding Non- Consumable tungsten electrode is used. It produces only electric arc. It can not be used as filler metal. The tungsten electrode is fixed in an electrode holder. When power supply is given an electric arc is produced between the tungsten electrode and the work piece. An inert gas like argon (or) helium is passed at the welding place through a nozzle. The inert gas produces a gas shield around the electric arc. The edges of work pieces are melted by the electric arc and joined together to give weld. The electrode will not be melted during welding.

11  Aluminium, cast iron, steel and magnesium can be welded by this method  Welding sheet metal and thinner sections  Aircraft, chemical and instrument industries Rocket motor chemical and instrument industries Rocket motor chamber fabrications in launch vehicles.

12  MIG Welding Machine  Size of Filler Rod : 2mm  Filler Rod Material : Copper Coated Mild Steel  TIG Welding Machine:  Amps : 20 -300-AT/TIG  Tig : 16 Amps /415v  Cooling : Air cooling  Frequency : 50Hz

13  EN8 – Unalloyed medium carbon steel  OHNS – Oil harden Non shrinking steel Typical Analysis EN8 : C Si mn s p 0.40% 0.25%0.80% 0.015% 0.015% OHNS : C Si mn s p 0.40% 0.25% 0.70%1.20% 0.30%

14  Destructive Testing  Non Destructive Testing Non-Destructive Testing Visual testing Penetrant Testing Electro Magnetic Testing Ultrasonic Testing Radiography Testing

15

16

17  Rockwell Hardware Test  Before Welding  EN8-25(average value)  OHNS-16(average value)

18 Radio Graph No V 17.5 / A 129 V 20.2 / A 183 V 25.0 / A 257 Material : EN8&OHNS

19


Download ppt "PRESENTED BY ILAMVAZHUTHI.C 1 Under the guidance of Mr.S.CHOKALINGAM M.E (Assistant professor) DEPARTMENT OF MECHANICAL ENGINEERING E.G.S.PILLAY ENGINEERING."

Similar presentations


Ads by Google