1. ASIC Design Final project requirement - 1 Mid-term project requirement –Write a complete spec of MSDAP Introduce the application Analyze the application in terms of operation and I/O requirements Explain the particular computation method Describe the procedure of developing a spec Develop a complete spec of MSDAP

2. ASIC Design Final project requirement - 2 –Develop a behavior model of MSDAP based on the spec The behavior model needs to be written in VHDL (or Verilog with the permission of TA) The model should cover the complete spec requirement

3. ASIC Design Final project requirement - 3 –Develop a testbench of MSDAP Write a testbench based on the spec in VHDL (or Verilog with the permission of TA) The testbench is the behavior model of the “host machine” discussed in the class Connect the testbench with your behavior model of MSDAP and test all possible transitions (operation conditions) and reasonable number of inputs/outputs Mark your tested results to show they cover the necessary design corners, and they are correct.

4. ASIC Design Final project requirement - 4 –Writing requirement A technical report on this project –Objective –Main work –Results –Remarks and comments –Use examples and figures properly –Write in a logical, formal and technical manner Source codes for both behavior model and testbench Simulation (test) results (well marked and explained) A set of power points slides for the presentation of your project in 15 minutes

5. ASIC Design Final project requirement - 5 –Deadline: Oct. 27, 2014. Send electronic copy to TA