1. ISOMETRIC CIRCLE

2. DRAW THE ISOMETRIC AXIS
DRAW THE ISOMETRIC AXIS. Mark the dimension of the BLOCK Example 60 –
60 mm

3. DRAW THE ISOMETRIC AXIS.
60 mm

4. DRAW THE ISOMETRIC AXIS.
60 mm

5. DRAW THE “BLOCK”.

6. DRAW THE “BLOCK”.

7. DRAW THE “BLOCK”.

8. DRAW THE “BLOCK”..

9. DRAW THE ISOMETRIC AXIS.

10. DRAW THE ISOMETRIC AXIS.

11. THE “BLOCK”.

12. We will start on this plane.
Work on this Plane.
We will start on this plane.

13. Divide the plane into 4. Draw line at the midpoint2 1 3 4

14. Draw a line from the corner with the biggest angle to the midpoint of the opposite side.
Midpoint of opposite side
Corner with biggest angle 2
Midpoint of opposite side 1 3 4

15. Draw a line from the corner with the biggest angle to the midpoint of the opposite side.2 1 3 4

16. Do the same in the other biggest angle.2 1 3 4

17. With the radius equal to the length of line from corner to midpoint, strike an ARC to the opposite corner.
Radius
ARC

18. Do the same in the opposite corner.
ARC
Radius

19. Do the same in the opposite corner.
ARC
Radius

20. Do the same in the opposite corner.
Radius
ARC

21. Remember the Radius use to make the BIG Arc and the SMALL arc..

22. Let us work on the next plane.
Next, We will work on this Plane

23. Again divide the plane into 4.
Draw line from midpoint
Radius
ARC
Draw line from midpoint

24. Draw again the line from the biggest agle to the midpoint of opposite side.
Corner with biggest angle
Midpoint opposite side
Radius
ARC

25. Draw again the line from the biggest agle to the midpoint of opposite side.
Corner with biggest angle
Midpoint opposite side
Radius
ARC

26. Strike again an arc with the given Radius.

27. Strike again an arc with the given Radius.

28. Strike again an arc with the given Radius.

29. Strike again an arc with the given Radius.

30. Strike again an arc with the given Radius.

31. Now we will do the last plane.

32. Again Divide the plane into 4.

33. Make the intersect Line same from previous procedure.

34. Make the intersect Line same from previous procedure.

35. Make the intersect Line same from previous procedure.

36. Make the intersect Line same from previous procedure.

37. Make the intersect Line same from previous procedure.

38. Make the intersect Line same from previous procedure.

39. Make the intersect Line same from previous procedure.

40. Finish
Great Job!!!

42. Inscribe "Isometric CIRCLE”.
“Isometric BOX”.
“Isometric CUBE”.
Draw midpoint line, horizontal and vertical
Draw line from vertex of 120 to midpoint of opposite side. Do on both corner.
Strike big and small radius until circle is complete. 1 2
120
120 3
Inscribe "Isometric CIRCLE”.