1. 1 Positioning Statement LinkRunner Network Multimeter An essential personal tool to quickly verify network connectivity and availability 1

2. 2 Overview Contents Product selection guide Feature set overview Setup and configuration Product structure Note – Please run in presentation mode using space bar to advance slides at your own pace.

3. 3 FunctionLinkRunnerNetToolOneTouch Link ID X XX PC Configuration X Inline Mode X NIC / Hub / Cable TestsXXX UtilizationXXX Errors XX Device Discovery Passive Only X Network Statistics Layer 2Layer 2-3 Source ID PingXXX Trade Route X Duplicate IP Detection XX Web-Based Operation X Reports XX Cable IDX X TonerX X Traffic Generation X Product Selection Guide

4. 4 Easy to Use Get Quick Answers to Questions Like These: Is this an active Ethernet port? What speed/duplex is this device configured for? Can I see traffic from this connection? Can I Ping? Is the PC NIC ok? Is this a good cable? Where does the cable go?

5. 5 Isolate performance and connectivity problems by verifying that speed and duplex configurations of the PC and the switch port are compatible Understand if an Ethernet port is active by seeing Utilization

6. 6 Ping LinkRunner can be configured to use DHCP to automatically acquire a DHCP address and verify basic connectivity to key devices on the network.

7. 7 LinkRunner will ping the DNS server and default router Allows you to set up to 4 specified target IP address Identify non responsive key devices by watching transmitted/received frames

8. 8 Ping detail shows round trip time helping you to identify devices with a slow response time Identifies the segment your connected to

9. 9 Quickly isolate the cable plant or infrastructure as the culprit of a problem by checking the cable integrity

10. 10 Save hours of time documenting un-marked segments

11. 11 Use the optional Cable ID kit to identify unmarked segments

12. 12 LinkRunner Setup

13. 13 Configuration

14. 14 Ping Configuration In DHCP network environments, LinkRunner pings: –Default Router –DNS Server –User-defined device If a DHCP address can not be obtained by LinkRunner, this symbol will appear.

15. 15 User-defined Device Configuration

16. 16 LinkRunner IP Address Configuration

17. 17 LinkRunner Subnet Mask Configuration

18. 18 Blink Hub Port & Send Tone

19. 19 Product Structure

20. 20 LinkRunner LinkRunner Kit Contents –P/N1664475 / LINKRUNNER –LinkRunner –Wire map adapter –Localized users manual (English, French, German, Spanish, Portuguese, Korean, Japanese, Chinese) LinkRunner Extended Test Kit –P/N 1778554 / LINKRUNNER-KIT –All items in standard LinkRunner kit including all available accessories and custom carrying case. Registration incentive –Generic belt clip holster 20

21. 21 Models, Options and Accessories