Download presentation
Presentation is loading. Please wait.
Published byMervin Samuel White Modified over 9 years ago
1
Ions in Intense Femtosecond Laser Fields Jarlath McKenna MSci Project10th December 2001 Supervisor: Prof. Ian Williams
2
Outline Experimental Apparatus / Techniques –Z-scan –Intensity scan Introduction / Background –Strong Field Ionisation –Sequential and Non-sequential Ionisation Results and Analysis
3
Introduction Study of the ionisation dynamics of positively charged atomic ions in intense femtosecond Laser fields Analysis and interpretation of results –familarisation with experimental apparatus Experiments carried out in collaboration with a group from UCL –February 2002 at RAL using the ASTRA laser
4
Why? Why study strong field ionisation of positive atomic ions?Why study strong field ionisation of positive atomic ions? First study using a beam of positive atomic ions –allows study of wider range of species e.g. O +, N + –compare with results from neutral target All previous experiments have used neutral targets
5
Ground state Ionisation level Single Photon IonisationSingle Photon Ionisation –Ionisation energy of valence electron is supplied by one photon What happens in high intensity Laser interactions?What happens in high intensity Laser interactions? –Low intensity: Single Photon Ionisation –Higher intensity: Multiphoton Ionisation –Very high intensity: Field Ionisation
6
Multiphoton IonisationMultiphoton Ionisation –Ionisation energy of valence electron is supplied by a number of photons Ground state Ionisation level Virtual excited state Real excited state What happens in high intensity Laser interactions?What happens in high intensity Laser interactions? –Low intensity: Single Photon Ionisation –Higher intensity: Multiphoton Ionisation –Very high intensity: Field Ionisation
7
Multiphoton IonisationMultiphoton Ionisation –Ionisation energy of valence electron is supplied by a number of photons –Above Threshold Ionisation may take place Ground state Ionisation level ATI Virtual excited state Real excited state What happens in high intensity Laser interactions?What happens in high intensity Laser interactions? –Low intensity: Single Photon Ionisation –Higher intensity: Multiphoton Ionisation –Very high intensity: Field Ionisation
8
Electric field distorts the atomic potential well –this lowers the potential barrier seen by an electron in the atom/ion Field Ionisation Potential range ( x ) x0x0 Atomic Potential well V 0 ( x ) Potential well Electric field e-e-
9
Tunnelling RegimeTunnelling Regime Electric field distorts the atomic potential well –this lowers the potential barrier seen by an electron in the atom/ion Field Ionisation As barrier is lowered, it’s width decreases. Increased probability of electron tunnelling Potential range ( x ) x0x0 Atomic Potential well V 0 ( x ) Potential well Electric field e-e- e-e-
10
Over-the-barrier RegimeOver-the-barrier Regime Field Ionisation Electron is free to escape the atom Potential range ( x ) x0x0 Atomic Potential well V 0 ( x ) Potential well Electric field e-e- Potential barrier is lower than electronic state Electric field distorts the atomic potential well –this lowers the potential barrier seen by an electron in the atom/ion
11
Dynamic Stark ShiftDynamic Stark Shift Field Ionisation Potential range ( x ) x0x0 Atomic Potential well V 0 ( x ) Potential well Electric field e-e- Electric field distorts the atomic potential well –this lowers the potential barrier seen by an electron in the atom/ion Energy states of electrons are Stark shifted up towards the continuum Dynamic or ac Stark shift because of oscillating E-field of laser
12
Sequential: –Ionisation takes place in a series of steps Sequential and Non-Sequential Ionisation A A + A 2+ Non-Sequential: –Ionisation takes place in a single step A A 2+
13
CORE A Recollision Model Atomic core with outer shell of electrons Electric field strength from laser pulse expels an electron
14
CORE A+A+ Recollision Model During oscillatory motion of E-field, the electron may make multiple returns to the atomic core Electron may collide with a valence electron
15
CORE A 2+ Recollision Model Collision with another electron may directly remove the electron or excite it to a higher energy state in which it then tunnels its way through the remaining barrier
16
Ion Source -ions produced via discharge Extraction and Focussing Lenses - ions are accelerated to 1-2 keV Selection Magnet Einzel lens Deflection Plates Interaction Region 45 o Parallel Plate deflectors Neutral Fragment Detector Primary Beam Collector Charged Fragment Detector Apparatus Laser Beam
17
Laser Intensity is –Lorentzian along z direction –Gaussian in radial r direction Scan with a 0.5mm aperture r Z Value (mm) Radius (mm) z Slit Laser beam Intensity Selective Scanning or Z-scan
18
r Z Value (mm) Radius (mm) z Slit Laser beam Intensity Selective Scanning Laser Intensity is –Lorentzian along z direction –Gaussian in radial r direction Scan with a 0.5mm aperture or Z-scan
19
r Z Value (mm) Radius (mm) z Slit Laser beam Intensity Selective Scanning Laser Intensity is –Lorentzian along z direction –Gaussian in radial r direction Scan with a 0.5mm aperture or Z-scan
20
r Z Value (mm) Radius (mm) z Slit Laser beam Intensity Selective Scanning Laser Intensity is –Lorentzian along z direction –Gaussian in radial r direction Scan with a 0.5mm aperture or Z-scan
21
r Z Value (mm) Radius (mm) z Slit Laser beam Intensity Selective Scanning Laser Intensity is –Lorentzian along z direction –Gaussian in radial r direction Scan with a 0.5mm aperture or Z-scan
22
Uses a half-wave plate energy selector technique By rotating the angle of polarisation , the intensity is given by I = I 0 cos 2 Intensity Scan /2 Polaroid /2 Plate Slow Fast Laser
23
Results and Analysis Z-scan and Intensity scan results for ionisation of positively charged ions: C +, Ne +, He +, Kr + Model the results using theoretical approaches –Volume fit for saturation ionisation –ADK tunneling model Suggest explanations for some of the main features of the results
24
Z Scan results for C 2+ ion production Z scan displays the classic Gaussian volume shape Shoulder feature is indicative of a secondary process at a lower threshold intensity Shoulder feature
25
Determines the ion production volume at saturation For saturated regime; Ion yield Interaction volume r Z Value (mm) Radius (mm) z Slit Laser beam Saturated Volume Method Rayleigh range z 0 = 0 2 / Waist radius 0 =2f / D z -aperture size I s -Saturation intensity IsIs
26
Theoretical Volume fit to Z-scan of C 2+ Volume method only works well for ‘over-the-barrier’ ionisation –It doesn’t describe the tunneling ionisation regime at low intensities
27
Intensity Scan for C 2+ Production Two distinguishable regions to the results: 1. Low intensity curve indicating C 2+ production from the C + metastable state. 2. High intensity curve indicating production from C + groundstate.
28
Intensity Scan for C 2+ Production ADK Tunneling Model 1. ADK is a quasi-static tunneling method which models ionisation rate w 2. Provides a probability of tunnel ionisation as a function of the intensity of the alternating E-field C + GS – C 2+ GS C + MS – C 2+ GS C + MS – C 2+ MS MS –Metastable GS -Groundstate
29
Intensity Scan for C 2+ Production 1. ADK is a quasi-static tunneling method which models ionisation rate w 2. Provides a probability of tunnel ionisation as a function of the intensity of the alternating E-field ADK Tunneling Model SUM
30
Intensity Scan for Ne 2+ Production Best fit includes ionisation to states which require the spin flip of an electron Ne + GS – Ne 2+ GS Ne + 4 P – Ne 2+ GS Ne + 4 P – Ne 2+ 1 S Ne + 4 P – Ne 2+ 1 D SUM
31
At low intensity there is the apparent onset of non-sequential ionisation processes The best physical model for these non-sequential processes is the ‘recollision model’ Non-Sequential Ionisation in C 3+ ADK fit
32
Summary In an intense Laser field, atoms and ions are ionised via field ionisation –distortion of Coulomb potential by E-field of laser –sequential and non-sequential ionisation processes Experimental techniques employed are the z-scan and intensity scan ADK and Saturated Volume models appear to work well –suggestion of spin-flips due to magnetic field effects
33
Multiply charged positive ions Limit the interaction volume for the intensity scan studies Future February 2003, 4 week experimental run at RAL Compare results from positive ion target to neutral target Repeat some of the results from previous run
34
Acknowledgements Prof. Ian Williams (Dr) Gail Johnston Dr B. Srigengan Dr Jason Greenwood Many thanks to…. …..et al
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.