1. SAFETY IN THE CLASSROOM
General Woodshop Safety
Part I

2. Why Learn about Safety
Knowledge of Safety helps you learn how to protect yourself from different hazards that you will encounter as you begin working in the shop at the school.
It applies to you even if you are working with tools at your own house, or are helping someone out with a building project.

3. General Shop Safety-Part I
Eye & Face Protection
Foot Protection, Clothing, Jewelry, Hair
Machine Guards
Electrical Hazards
Shop Cleanup

4. Eye & Face Protection
When cutting and working with wood, you always run the chance of being exposed flying particles that can hit either your eyes or your face.
Any time you are working with a chemical product that might splash into your eyes, such as when you are putting a finish, such as oil or urethane on your project, you need to wear safety glasses.

5. Safety glasses
Safety glasses are the easiest type of eye protection to wear. Safety glasses should cover both the front and sides of your eyes. They protect against flying objects such as particles and dust.

6. Goggles
In addition to protection from particles and dust, goggles provide additional protection from splashes of liquids, because they fit snugly on your face. For this reason they protect your eyes better than safety glasses.

7. Face shields
Can be worn with safety glasses or goggles. Face shields are adjustable and guard your face against both flying objects and splashes.

8. Contact lenses and prescription glasses
Contact lenses and prescription glasses will not protect your eyes. Special safety glasses and goggles are available that can fit over your regular prescription glasses. Let your teacher know that you need safety glasses that fit over your regular glasses.
If you wear contact lenses, fine wood dust might get under the contact lens and injure your eye. Wearing goggles will help keep dust from getting under your contact lenses.

9. Eye & Face Protection Quiz
1) When you're in the shop, if you normally wear prescription glasses, you: a) Should take them off and just wear safety glasses instead b) Should ask your teacher for safety goggles that fit over your glasses c) Do not need safety goggles because your regular glasses will protect your eyes d) Both A and C
2) Safety goggles can protect your eyes better than safety glasses because: a) They protect against dust b) They protect against particles c) They fit snugly against splashes d) All of the above
3) If you wear contact lenses it is particularly important to wear safety goggles in the shop because: a) Dust particles can get under your contact lens and injure your eye b) It can be hard to see small objects without safety goggles c) Safety goggles will do a better job keeping out dust than safety glasses d) Both A and C

10. Foot Protection, Clothing, Jewelry, Hair
                                                                                   
Foot Protection, Clothing, Jewelry, Hair
Why is it so important to wear the right kind of clothing when you are working in a wood shop?
Anytime you are wearing something loose, there is the possibility it could become tangled in your machine. This includes not only your clothing, but also necklaces and other jewelry.

11. Foot Protection, Clothing, Jewelry, Hair
People have been seriously injured when their hair has gotten wound around a fast-spinning tool.
Open-toed shoes (like sandals) do not offer enough protection for your feet

12. Clothing
Roll long sleeves up above the elbow. This will keep your clothes clean and prevent the material from getting caught in the tool you are working with.

13. Foot Protection
If you don't have the right shoes or boots, you could jam or stub your toe on equipment. Your toes could also get crushed or cut by falling objects. Even a small object, no heavier than 7 pounds, can injure your foot when dropped from waist height. To prevent these injuries NEVER wear shoes with open toes (like sandals of any kind) while working in the shop.

14. Foot Protection
Shoe Soles Make sure the soles of your shoes are thick enough to prevent nails from puncturing them. On construction and building sites, it is easy to walk on a board with a nail sticking out of it. If you were just wearing tennis shoes, that nail could puncture your foot.

15. Foot Protection
Steel Toes The best way to protect your feet from crushing is to wear boots or shoes that have cap built into the shoe, which covers the toes. These are called steel-toed shoes. These are required on many construction and building sites because the risk of foot injuries is so high.

16. Jewelry
If you are wearing a loose necklace, either tuck it into your shirt or take it off and put it into your pocket while you are working. Take off rings and put them in your pocket to prevent your fingers from getting caught in the moving equipment.

17. Long hair
Tie it back so it can not hang over the tool you are working with.

18. Foot Protection, Clothing, Jewelry and Hair Quiz
1) How heavy would an object dropped from waist-height need to be to injure your foot? a) 100 pounds b) 50 pounds c) 20 pounds d) 10 pounds
2) What is the best way to protect your feet from falling objects? a) Always be ready to jump out of the way when something falls b) Wear sneakers or tennis shoes so you can move quickly c) Wear boots with steel caps to protect your toes d) Both A and B
3) Which of the following is NOT a good reason to tie your hair back when you're in the shop? a) Pony-tails are in style b) It could get tangled in a machine c) To keep it from hanging over your work d) Both B and C

19. Machine Guards
Because most of the equipment found in a shop has sharp blades moving at high speeds, the potential for severe injuries is high. For this reason an essential part of most pieces of equipment in a shop are the machine guards.
Modern guards provide protection without interfering with the tools ability to do the job you want it to do.

20. Machine Guards
Properly functioning guards provide a barrier between the person operating the tool and the fast moving blades. They also help contain sawdust, wood chips and other debris that can be thrown towards the person operating the equipment.

21. Machine Guards
Machine guards by themselves can’t protect you. In order for them to work properly requires that you set up and use the equipment in a safe manner.

22. Machine Guards Quiz
1) Which of the following is NOT a function of machine guards? a) To protect the operator from fast moving blades b) To contain sawdust, wood scraps and debris c) To interfere with the operator's ability to use the equipment d) To help keep the operator safe
2) What should you do with the machine guard when you go to use a machine a) Remove it before beginning your cut b) Fold it back c) Cover it d) Keep them in place

23. Electrical Hazards
Power equipment, hand tools, and electrical cords are commonly found in woodworking shops. Because even small electric shocks are dangerous, it is important that you are familiar with the hazards. These include electrocution, fire, or explosions

24. Electrical Hazards
Electricity is always trying to get to the ground. If something that conducts electricity (like your body) gives electricity an easy path to the ground, it will take it. So if you touch an electric circuit and the ground at the same time, you will become electricity’s easiest path. Electricity will flow through you, and you could be seriously hurt or killed.

25. Electrical Hazards
The tools you work with in the shop (just like appliances at home) have insulated coverings and cords to prevent your body from contacting the electricity inside.
You can never tell when contact with electricity will be fatal, but it will always hurt. Electric shock can cause muscle spasms, weakness, shallow breathing, rapid pulse, severe burns, unconsciousness, or possibly death.

26. Electrical Hazards
In a serious shock accident, the path that the electric current takes through the body gets very hot. Burns occur all along that path, including the places on the skin where the current enters and leaves the body

27. Electrical Hazards
If you see crack, frays, or holes in plugs, power cords or extension cords –DO NOT USE until replaced or repaired by your teacher. Worn cords can cause a fire, shocks, or short circuits.

28. Electrical Hazards
Never break off the third prong from a three prong plug, to make it fit in a two prong outlet.
Never overload an outlet with too many plugs. Plugging in too many cords is a fire hazard.

29. Electrical Hazards
When removing a plug from an outlet, pull it by the plug, not the cord. Pulling the cord will wear it out quickly and create a shock hazard.
Keep cords away from heat and water. Heat and water can damage the insulation and create a shock hazard. Don’t run cords under floor mats, where they are a fire hazard.

30. Electrical Hazards Quiz
1) Which of the following is not a good way to place an electrical cord: a) Away from water b) Away from heat c) Under a floor mat d) All of the above
2) If you touch a source of electricity while you're also touching the ground, the electricity will: a) Look for the easiest path to the ground, so it will travel through your clothes b) Look for the easiest path to the ground, so it will travel directly through your body c) Be absorbed by your body, and never reach the ground d) Stay within the wires
3) When you're dealing with an electrical cord you should NEVER: a) Stop what you're doing if the cord is frayed or uncovered, it's a waste of your time in the shop fixing things instead of working on your projects b) Break off the third prong of a three prong plug to make it fit in a two prong outlet c) Waste your time looking for another outlet if you find too many plugs in one outlet, outlets are made to hold many, many plugs d) Both A and C

31. Shop Cleanup
Clutter Don’t allow clutter to accumulate in the shop area. Clutter provides areas for wood dust to accumulate and not get cleaned up. Clutter can also get into your way while you are working, increasing the risk of an accident. On the floor it can cause tripping hazards.

32. Cleaning Work Benches
When cleaning sawdust from tools and work benches, do not use compressed air or your hands. Compressed air could blow small pieces of wood or sawdust into your eyes. If you use your hands, you could get cuts or splinters. The best way to clean equipment and bench tops is to use a hand brush.

33. Cleaning the floor
At the end of class, make sure the floor is swept and the waste sawdust is disposed of properly

34. Equipment Storage
When you are finished for the day, place your project in the storage area, This will help protect your work and keep it from getting in the way of other students.

35. Tool Storage
Return all tools to back to their assigned storage areas.

36. Shop Cleanup Quiz
1) Which of the following is NOT a good reason to keep a shop neat and tidy: a) Things left on the floor can be tripping hazards b) A clean shop looks more productive c) Wood dust can accumulate on piles of clutter d) Clutter can increase the chance of having an accident
2) If you see a liquid spilled on the floor you should a) Let the custodian clean it up at the end of the day b) Wait till the end of class to clean it up c) Throw saw dust on it to absorb the liquid d) Let the teacher know and clean it up immediately
3) What is the safest way to clean up wood dust? a) Blow the wood dust off using your breath b) Using compressed air c) Wiping the dust away with your hands d) Use a hand brush or broom
4) At the end of class you should be sure to do each of the following, EXCEPT: a) Sweep the floor b) Put tools back in the right storage places c) Put your project in the storage area d) Leave you project in the work area so it will be easy to start working again the next time you're in the shop

37. Source
University of Washington