1. Building Fast, Flexible Virtual Networks on Commodity Hardware Nick Feamster Georgia Tech Trellis: A Platform for Building Flexible, Fast Virtual Networks on Commodity Hardware, Mundada, Bhatia, Motiwala, Valancius, Muhlbauer, Bavier, Nick Feamster, Rexford, Peterson, ROADS 2008 Building a Fast, Virtualized Data Plane with Programmable Hardware, Bilal Anwer and Nick Feamster (In Submission)

2. 2 Concurrent Architectures are Better than One (Cabo) Infrastructure: physical infrastructure needed to build networks Service: slices of physical infrastructure from one or more providers The same entity may sometimes play these two roles.

3. 3 Network Virtualization: Characteristics Multiple logical routers on a single platform Resource isolation in CPU, memory, bandwidth, forwarding tables, … Customizable routing and forwarding software General-purpose CPUs for the control plane Network processors and FPGAs for data plane Sharing Customizability

4. 4 Requirements Scalable sharing (to support many networks) Performance (to support real traffic, users) Flexibility (to support custom network services) Isolation (to protect networks from each other)

5. 5 VINI s c BGP Prototype, deploy, evaluate new network architectures –Carry real traffic for real users –More controlled conditions than PlanetLab Extend PlanetLab with per-slice Layer 2 virtual networks –Support research at Layer 3 and above

6. 6 PL-VINI Abstractions –Virtual hosts connected by virtual P2P links –Per-virtual host routing table, interfaces Drawbacks –Poor performance: 50Kpps aggregate 200Mb/s TCP throughput –Customization difficult Control XORP (routing protocols) UML eth1eth3eth2eth0 PlanetLab VM Click Packet Forward Engine Data UmlSwitch element Tunnel table Filters UDP tunnels

7. 7 Trellis Same abstractions as PL-VINI –Virtual hosts and links –Push performance, ease of use Full network-stack virtualization Run XORP, Quagga in a slice –Support data plane in kernel Approach native Linux kernel performance (15x PL-VINI) Be an early adopter of new Linux virtualization work kernel FIB virtual NIC application virtual NIC user kernel bridge shaper EGRE tunnel bridge shaper EGRE tunnel Trellis virtual host Trellis Substrate

8. 8 Virtual Hosts Use container-based virtualization –Xen, VMWare: poor scalability, performance Option #1: Linux Vserver –Containers without network virtualization –PlanetLab slices share single IP address, port space Option #2: OpenVZ –Mature container-based approach –Roughly equivalent to Vserver –Has full network virtualization

9. 9 Network Containers for Linux Create multiple copies of TCP/IP stack Per-network container –Kernel IPv4 and IPv6 routing table –Physical or virtual interfaces –Iptables, traffic shaping, sysctl.net variables Trellis: marry Vserver + NetNS –Be an early adopter of the new interfaces –Otherwise stay close to PlanetLab

10. 10 Virtual Links: EGRE Tunnels Virtual Ethernet links Make minimal assumptions about the physical network between Trellis nodes Trellis: Tunnel Ethernet over GRE over IP –Already a standard, but no Linux implementation Other approaches: –VLANs, MPLS, other network circuits or tunnels –These fit into our framework kernel FIB virtual NIC application virtual NIC user kernel EGRE tunnel EGRE tunnel Trellis virtual host Trellis Substrate

11. 11 Tunnel Termination Where is EGRE tunnel interface? Inside container: better performance Outside container: more flexibility –Transparently change implementation –Process, shape traffic btw container and tunnel –User cannot manipulate tunnel, shapers Trellis: terminate tunnel outside container

12. 12 Glue: Bridging How to connect virtual hosts to tunnels? –Connecting two Ethernet interfaces Linux software bridge –Ethernet bridge semantics, create P2M links –Relatively poor performance Common-case: P2P links Trellis –Use Linux bridge for P2M links –Create new shortbridge for P2P links

13. 13 Glue: Bridging How to connect virtual hosts to EGRE tunnels? –Two Ethernet interfaces Linux software bridge –Ethernet bridge semantics –Support P2M links –Relatively poor performance Common-case: P2P links Trellis: –Use Linux bridge for P2M links –New, optimized shortbridge module for P2P links kernel FIB virtual NIC application virtual NIC user kernel bridge* shaper EGRE tunnel bridge* shaper EGRE tunnel Trellis virtual host Trellis Substrate

14. 14 IPv4 Packet Forwarding 2/3 of native performance, 10X faster than PL-VINI Forwarding rate (kpps)

15. 15 Virtualized Data Plane in Hardware Software provides flexibility, but poor performance and often inadequate isolation Idea: Forward packets exclusively in hardware –Platform: OpenVZ over NetFPGA –Challenge: Share common functions, while isolating functions that are specific to each virtual network

16. 16 Accelerating the Data Plane Virtual environments in OpenVZ Interface to NetFPGA based on Stanford reference router

17. 17 Control Plane Virtual environments –Virtualize the control plane by running multiple virtual environments on the host (same as in Trellis) –Routing table updates pass through security daemon –Root user updates VMAC-VE table Hardware access control –VMAC-VE table/VE-ID controls access to hardware Control register –Used to multiplex VE to the appropriate hardware

18. 18 Virtual Forwarding Table Mapping

19. 19 Share Common Functions Common functions –Packet decoding –Calculating checksums –Decrementing TTLs –Input arbitration VE-Specific Functions –FIB –IP lookup table –ARP table

20. 20 Forwarding Performance

21. 21 Efficiency 53K Logic Cells 202 Units of Block RAM Sharing common elements saves up to 75% savings over independent physical routers.

22. 22 Conclusion Virtualization allows physical hardware to be shared among many virtual networks Tradeoffs: sharing, performance, and isolation Two approaches –Trellis: Kernel-level packet forwarding (10x packet forwarding rate improvement vs. PL-VINI) –NetFPGA-based forwarding for virtual networks (same forwarding rate as NetFPGA-based router, with 75% improvement in hardware resource utilization)