1. Hybrid IP PBX

2. KX-TDA100/200

3. KX-TDA Hybrid IP-PBX
The ultimate solution for the seamless synchronisation of voice and data.
Vastly improved feature set and even greater ease of operation.
Completely new architecture with Panasonic’s legendary reliability.
Integrated DECT portable phones.
PC-Phone and PC-Console via USB.

4. KX-TDA Hybrid IP-PBX Advanced Networking.
Tie Lines
VPN
Q-Sig
VoIP
Higher Call Centre functionality.
Multi-connect CTI.

5. Hybrid IP-PBX The Concept: New Technology Quick Development
VoIP
QSIG
Wireless
xDSL
Open Architecture
Hybrid
IP-PBX
Global Business
using Internet
Expandability
Call Centre with
CTI / IVR / CRM
New Architecture
Worldwide
Software Ver.
Unified Messaging
VM/Fax-mail/
Quick Development
New Customer Needs

6. Convergence of Telephone & IT Networks
Telephony Network
IT Network
Remote
Maintenance
Remote
Maintenance
Networking
CTI Server
Panasonic
PSTN/ISDN
Internet
Personal CTI
DPT
Panasonic
Hybrid IP-PBX
Office CTI
Router
USB
CTI Client
SLT
LAN
H.323
IP Telephony
Wireless Data
Hybrid of
Technologies

7. KX-TDA Line-up
TDA ports
TDA ports
TDA ports

8. KX-TDA System Outline
The Main Unit consists of a Basic Shelf that includes an MPR (Main Processor) card. * Power Supply must be ordered separately according to requirements.
The ‘Free Slot’ architecture allows a wide variety of CO, Extension and other peripheral cards to be installed easily into the system’s remaining slots.

9. KX-TDA System Outline
The TDA200 can be configured to a maximum of 216 ports.
128 Extns / 128 Lines max.
The TDA100 can be configured to an absolute maximum of 108 ports.
64 Extns / 64 Lines max.

10. KX-TDA Configurations
Free Slot Architecture
TDA100
TDA200

11. KX-TDA System Capacity - 1
Max. Port
216
108 36
Initial Configuration
0-CO / 4-Hybrid port
Free Card Slot
10-slot
5-slot CO
2-slot [4-port]
Optional Card Slot
1-slot
1-slot
EXT.
2-slot [8-port]
1-slot [4-port]
Power Supply
Medium (M)
Small (S)
Max. Trunk Port
128 64
8 or 12
Max. CO (PSTN)
128 64 8
Max. E&M (Tie Line) 32 16
N/A
Max. BRI, S0-Bus
64 (128-ch)
32 (64-ch)
6 (12-ch)
Max. PRI, Internal PRI
4 (120-ch)
2 (60-ch)
N/A
Max. E1
4 (120-ch)
2 (60-ch)
N/A
Max. IP Gateway Card
4 (16-ch)
2 (8-ch)
1 (2-ch)

12. KX-TDA System Capacity - 2
Max. Port
216
108 36
Free Card Slot
10-slot
5-slot
4-Hybrid port
1 x 4-Port Slot
2 x 8-Port Slot
Optional Card Slot
1-slot
1-slot
Max. Extension
128 64 28
Max. SLT
128 64 24
Max. D-PT
(T7600 series, T7565, T7560)
128 64 24
Max. D-PT including Digital XDP
128 64 24
Max. Old D-PT (Note-1 )
(T75/T74/T72 series) 32
(128 : Note2 ) 16
(32 : Note3 ) 4
(24 : Note4 )
Max. DECT-Cell Station
32 (128-ch)
16 (64-ch)
4 (16-ch)
Note-1: An old DPT Consumes 4 times the power of a new DPT. Therefore, calculate 1 old DPT as 4 DPTs.
Note-2: Requires Optional Power Supply L.
Note-3: Requires Optional Power Supply M. Note-4: Requires Optional Power Supply SX.

13. KX-TDA System Capacity - 3
Other Accessories
Max. DECT CS (Antenna) 32 16 4
Note : A DECT CS belongs to Extension Type and is counted as an Extension.
Max. DECT PS (Cordless)
128
128 24
Max. TVP system 2 2 1
Max. Doorphone 16 8 4
Max. Door Opener 16 8 4
Max. External Relay 16 8
N/A
Max. External Sensor 16 8
N/A
Max. Voice MSG(OGM) Ch. 16 8 2
Max. BGM / MOH Input 2 2 1
Max. External Paging 2 2 2
Max. RS232C / SMDR 1 1 1
Max. USB 1 1 1
Max. Ethernet For CTI or Programming 1 1 1
Max. PC Console 8 8
N/A

14. 1 KX-TDA200/100 MPR card MPR : Main Processor card (Pre-installed)
Same unit for both TDA100 and TDA200
SD (Secure Digital) card (16 Mb Pre-installed) - System Software - Customer Data - Replaceable
- ISDN Remote Maintenance to update Main Software
SD Slot
RMT Analogue Modem
Analogue Modem card (Optional) - Max. 56K bps (V.90)
USB Interface (Pre-installed) - Programming / CTI
USB I/F
MEX Expansion Memory
Expansion Memory card (Optional) - Available from Version 1.1 Software - Extension Capacity Expansion
Serial I/F
RS232-C / V.24 Interface (Pre-installed) - Programming / SMDR 1

15. KX-TDA200/ Trunk cards
Trunk cards (Optional) Installed in any “Free slot”
LCOT 8 LCOT 16
8 or 16 Analogue CO card - Polarity Reversal
E&M 8
8 E&M card
- Type 5
CID8/PAY8
Caller ID card for 8 CO (FSK/DTMF) 12/16KHz Detection
BRI 4
BRI 8
PRI 30
4 or 8 Basic Rate ISDN card
1 Primary Rate ISDN card (30-ch)
- RJ45 / BNC
E1 (30-ch)
IP-GW 4
1 E1 card
- RJ45 / BNC
4 IP Gateway card
- 10 Base-T
- Occupies 2-slots

16. KX-TDA200/100 Extension cards
Extension cards (Optional) Installed in any “Free slot”
8 Digital Hybrid Line card
- Supports 8 DPT and 8 SLT, or 8 APT.
- 2 Power Failure port
- 8 DTMF Receiver
- XDP
- DXDP (from V1.1)
DHLC8
DLC 8 DLC 16
8 or 16 Digital Line card
- Cabling : 500 m
- DXDP (from V1.1)
SLC8
SLC16
MSLC16
8 or 16 SLT Line card
- 2 or 4 Power Fail ports
- 8 or 16 DTMF Receivers
- 48V (1500m)
16 SLT with Message Lamp
- 90-Volt Neon Lamp
- 4 Power Fail ports
- 16 DTMF Receivers
CSINF4
CSINF 8
4 or 8 DECT-CS Interface
- Cabling : Up to 1000 m

17. KX-TDA200/100 Optional cards
Option card Installed in “Option Slot” & any “Free slot”
OPB 3
Optional card mounting base board
- Houses 3 small optional cards MSG4 / DPH4 / EIO4 and ECHO16
4 Doorphone / Door Opener card
DPH4
4-Ch. Message card
- Total 8 min. Max. 64 Msgs
MSG4
16-Ch. Echo Canceller card
- Suppresses echo signal
- Required for
1) Multiparty Conference from party to 8-party (Especially for Analogue CO and SLT customers)
2) Analogue CO to CO Transfer
3) Network-based echo
ECHO16
4 Sensor Input / 4 Relay Output card (Ver.1.1)
EIO4
CTI-LINK
CTI Interface Card
- 10 Base-T

18. TDA System Configuration - Cards & Slots
Extension Card
DHLC8
DLC8, DLC16
SLC8, SLC16
Max. 8 Cards
Max. 4 Cards
CSINF4
CSINF8
Max. 4 Cards
Max. 2 Cards
Free Slot
Limitation
Total
Max. 8 Cards
Max. 4 Cards
Trunk Card
LCOT8, LCOT16
BRI4, BRI8, E1
PRI30, E&M4
IP-GW4
Max. 8 Cards
Max. 4 Cards
System
Limitation
One PRI30 or One E1 card counts as “2-cards”
Free Slot TOTAL
Max. 10 Cards
Max. 5 Cards
PRI30 / E1 count as “1-card” (Not 2)
Option
OPB3, CTI-Link
Max. 4 Cards
Max. 2 Cards
System TOTAL
Max. 11 Cards
Max. 6 Cards

19. TDA System Configuration - OPB3 Cards
DOOR4 DOOR2
MSG4
Max. 4 Cards
Max. 2 Cards
Options
ECHO
Max. 2 Cards
Max. 1 Cards

20. TDA System Configuration - Power Factor
Power Supply
PWS-S
For TDA100 64
Power Factor
PWS-M
For TDA100/200
128
PWS-L
For TDA200
512
Terminals and Cards
Power Factor PT
T7600 / T7565 / T7560 (New DPT)
T7400 / T7200 (Old DPT)
APT (T73xx) / DSS (T73/74xx) 1 4 4
SLT
SLC8 card
SLC16 card
MSLC16 card
DHLC8 card 8 16 16 8
DECT CS (TDA0142) 4
ISDN-Extension (2ch) 2
KX-TVP Port (2ch) 1

21. TDA System Configuration - Calculation-1
Step 1
Requirement
Step 2
Slot Calculation
Step 3
Unit Selection
Physical Slots
T76xx 30
DLC16 x 2-cards = 32 port 2
Extension
SLT 60
SLC16 x 4-cards = 64 port 4
BRI8 x 2-cards = 16 port
ISDN BRI 15 2
Trunk
Analogue CO 4
LCOT8 x 1-card = 8 port 1
Total
9 Slots
is Required
for this Configuration. 
TDA200
Step 4
Power Factor Calculation
Power
Factor
T76xx / T7565 / T7560 PT 1 x 30 = 30
Total
Power Factor 94
SLT
SLC16 card 16 4 64 x = 
Therefore, is Required !
PWS-M

22. TDA System Configuration - Calculation-2
Step 1
Requirement
Step 2
Slot Calculation
Step 3
Unit Selection
Physical Slots
T76xx 4
Total DPT ports = = 14
DLC16 x 1-card = 16 port
T74xx 10 1
Extension
SLT 15
SLC16 x 1-card = 16 port 1
DECT CS 6
CSINF8 x 1-card = 8 port 1
ISDN BRI 7
Total BRI ports = = 10
BRI 8 x 2-cards = 16 port
Trunk 2
ISDN Extension 3
Total
5 Slots
Step 4
Power Factor Calculation
is OK
for this Configuration. 
TDA100
Power
Factor
T76xx / T7565 / T7560
T74xx / T72xx PT 1 x 4 = 4 4 x 10 = 40
SLC8 card
SLC16 card
SLT 8 x =
Total
Power Factor 90 16 1 16 x = 
DECT CS (TDA0142) 4 6 24 x =
Therefore, is Required !
PWS-M
ISDN-Extension (2ch) 2 3 6 x =

23. TDA System Configuration - Calculation-3
Step 1
Requirement
Step 2
Slot Calculation
Step 3
Unit Selection
Physical Slots
T76xx 25
DLC16 x 2-cards = 32 port 2
Extension
SLT 15
SLC16 x 1-card = 16 port 1
DECT CS 5
CSINF8 x 1-card = 8 port 1
Trunk
BRI8 x 2-cards = 16 port 2
ISDN BRI 14
Total
6 Slots
TDA200
is Necessary ! 
Step 4
Power Factor Calculation
Power
Factor PT
T76xx / T7565 / T7560 1 x 25 = 25
SLT
Total 61
SLC16 card 16 1 16
Power Factor x =
DECT CS (TDA0142) 4 5 20  x =
Therefore, is Required !
PWS-M

24. TDA System Configuration - Calculation- 4
Step 1
Requirement
Step 2
Slot Calculation
Step 3
Unit Selection
Physical Slots
T76xx 4
Total DPT ports = = 14
DLC16 x 1-card = 16 port 1
T74xx 10
Extension
Extension
SLC16 x 1-card = 16 port 1
SLT 15
DECT CS 6
CSINF8 x 1-card = 8 port 1
ISDN BRI 7
Total BRI ports = = 10
BRI8 x 2-cards = 16 port
Trunk
Trunk 2
ISDN Extension 3
Total
5-Slots
Step 4
Power Factor Calculation PT
T76xx / T7565 / T7560
T74xx / T72xx
APT / T73/74xx DSS 1 x 4 = 4 4 10 40
TDA100
is OK
for this configuration.  x = 4 x =
SLT
SLC8 card
SLC16 card
MSLC16 card
DHLC8 card 8 x = 16 1 16 x =
Total 90
Power Factor 16 x = 16 x =
Therefore, is Required !
PWS-M 
DECT CS (TDA0142) 4 6 24 x =
ISDN-Extension (2ch) 2 3 6 x =
KX-TVP Port (2ch) 1 x =

25. TDA System Configuration - Calculation- 5
Step 1
Requirement
Step 2
Slot Calculation
Step 3
Unit Selection
Physical Slots
T76xx 15
Total DPT ports = = 18
DLC16 x 1-card = 16 port
DHLC8 x 2-cards = 16 port
SLC16 x 3-cards = 48 port 1
T7640 3
Extension
Extension 2
T7330 10
SLT 51 3
PRI 1
PRI30 x 1-card = 30 port 1
Trunk
Trunk
ISDN Extension 8
BRI8 x 1-card = 8 port 1
Step 4
Power Factor Calculation
Total
8-Slots PT
T76xx / T7565 / T7560
T74xx / T72xx
APT / T73/74xx DSS 1 x 15 = 15 4 x =
TDA200
is Required  4 13 52 x =
SLT
SLC8 card
SLC16 card
MSLC16 card
DHLC8 card 8 x = 16 3 48 x =
Total
163
Power Factor 16 x = 16 x 2 = 32
Therefore, is Required !
PWS-L 
DECT CS (TDA0142) 4 x =
ISDN-Extension (2ch) 2 8 16 x =
KX-TVP Port (2ch) 1 x =

26. KX-TDA100/200 Hardware

27. KX-TDA200/100 MPR RMT KX-TDA0196 MEX KX-TDA0105 SD (Built-in )
Card Name
Function
Card Configuration
FLASH: 512KB
SDRAM: 8MB
SRAM: 1.0MB * (TDA MB)
Slide SW ( Initialise / Normal)
TSW is in both MPR and LPR.
MPR
CPU : SH7709A (133MHz/32bit)
(Main Central Processing Unit )
RMT
Analogue modem card
Modem IC (V.90 support)
MAX:33.6Kbps
(Remote Maintenance Trunk)
(This card is unnecessary
when ISDN remote is used)
KX-TDA0196
Flash: 8MB
SDRAM: 8MB
SRAM: 1MB (Version 1.1)
MEX
Reserved for feature expansion
(Memory Expansion)
KX-TDA0105 SD
Pre-installed software
System will not initialise if an
SD card is not installed
-System data Back-up
Memory size: 16MB
(Built-in )
(Secure Digital Card)

28. System Initialize Switch
Main Processor Card [MPR]
Pager 1
Pager 2
LED1
(BATT Alarm)
LED2
(SD Access)
Reset Switch
System Initialize Switch
USB Port
MOH2
MOH1
*ASIC : Application Specific Integrated circuit
(Includes TSW)
SD Card Controller
Flash ROM
SRAM
USB Controller
ASIC*
SDRAM
CPU

29. KX-TDA200/100 DHLC8 DLC16 (DLC8) MSLC16 SLC16 (SLC8) CSIF8 Card Name
Max use
Function
Card Configuration
DHLC8
CPU : SH-1(12.288MHz)
Flash : 512KB External
RAM : 1KB Internal 128KB External
TDA200 8
TDA100 4
8 DPT/ APT/SLT/DSS Console ports
2 power fail ports
8 DTMF receivers
Level control per port
*Software downloadable from PBX
( Digital Hybrid Line)
KX-TDA0170
DLC16 (DLC8)
16(8) port DPT card
DSS console can be connected
Level control per port
*Software downloadable from PBX
CPU : SH-1(12.288MHz)
Flash : 512KB External
RAM : 1KB Internal 128KB External
TDA200 8
TDA100 4
(Digital Proprietary Line)
KX-TDA0172 (0171)
MSLC16
Message Waiting Lamp control
16 DTMF receivers
4 power fail ports
Level control per port
TDA200 8
TDA100 4
NO CPU
(SLT 90VMW Lamp 48V cct.)
KX-TDA0175
SLC16 (SLC8)
TDA200 8
TDA100 4
16(8) DTMF receivers
4(2) power fail ports
Level control per port
NO CPU
(8-port SLT Line 48V)
KX-TDA0174 (0173)
For DECT(4ch) / 2.4GHzSS-FH(3ch)
*Software downloadable from PBX
Level control per port
(CSIF8 is counted as 2 EXT. cards
with standard power unit.)
CSIF8
CPU : SH-1(12.288MHz)
Flash : 512KB External
RAM : 1KB Internal 128KB External
(8-port Cell Station I/F )
TDA200 4
TDA100 2
KX-TDA0144

30. CSIF8 Card Trans for the transmission LED1 (Card status)
Echo Canceling
ASIC
(CS-LPR communication)
RJ45
ASIC
(MPR-LPR communication)
CPU
Flash ROM

31. KX-TDA200/100 LCOT16 (LCOT8) CID/PAY8 CID8 E&M 8 E1 Card Name Max use
Function
Card Configuration
LCOT16 (LCOT8)
Polarity reversal detection
4 (2) power fail ports
Level control per port
(-6dB ~ +3dB per 3dB)
NO CPU
TDA200 8
TDA100 4
(Loop Start Trunk)
2-daughter board on LCOT16
KX-TDA0181 (0180)
1-daughter board on LCOT8
CID/PAY8
TDA
TDA100 8
(Caller ID/Pay Tone)
NO CPU
CO Caller ID type
-> Bell/ETSI/DTMF type
KX-TDA0189
CID8
(Caller ID )
TDA
TDA100 8
CO Caller ID type
-> Bell/ETSI/DTMF type
NO CPU
KX-TDA0193
Type5
DTMF/Pulse Dial
Signaling Type:
Continuous E&M / Pulsed E&M
*Software downloadable from PBX
CPU: SH-1 (12.288MHz)
FLASH: 512KB
RAM: Internal 1KB
SRAM: 128KB
E&M 8
TDA200 8
TDA100 4
(E&M TIE line card)
KX-TDA0184 E1
TDA200 4
TDA100 2
Level control (-9dB ~ 0dB per 3 dB)
*Software downloadable from PBX
MFC-R2 / DTMF / Pulse Dial
Signaling Type: Digital R2 /
Continuous E&M / Pulsed E&M
RJ45/BNC (Slide SW) (ITU-T / ANSI )
Connector:RJ45 (EIA/TIA)
CPU : SH-1(12.288MHz)
FLASH : 512KB
SRAM : 512KB
DSP mounted
(30ch E1 TIE line card)
KX-TDA0188

32. KX-TDA200/100 BRI8 (BRI4) PRI30 BRI2 DHLC4 LCOT4DHLC4 CID4 Card Name
Max use
Function
Card Configuration
BRI8 (BRI4)
TDA200 8
TDA100 4
CPU : SH-1(12.288MHz)
FLASH : 512KB
SRAM : 512KB
RJ45
(ISDN Basic)
Extension / CO trunk per port
*Software downloadable form PBX
Level control (-9dB ~ 0 dB per 3 dB)
Euro-ISDN / ETS
(Q-SIG)
KX-TDA0288 (0284)
CO Trunk / Extension
*Software Downloadable from PBX
Level control (-9 dB ~ 0 dB per 3 dB)
Impedance: selective (75/120ohms)
Euro-ISDN / ETS / NT1
PRI30
CPU : SH-1(12.288MHz)
FLASH : 512KB
SRAM : 512KB
Coaxial/RJ45 (Slide SW)
TDA200 4
TDA100 2
(ISDN Primary)
(Q-SIG)
KX-TDA0290
CPU : SH-1(12.288MHz)
Flash : 512KB External
RAM : 1KB Internal
128KB External
RJ45(CO trunk side)
BRI2 DHLC4
2-port ISDN basic I/F
for Extension / CO trunk per port
DPT / APT / SLT / DSS / Console
card with 4-port.
TDA200 4
TDA100 2
(Ver. 1.1)
(Q-SIG)
KX-TDA????
CPU : SH-1(12.288MHz)
Flash : 512KB External
RAM : 1KB Internal 128KB External
RJ45 (CO trunk side)
LCOT4DHLC4
4-port analog LCOT (polarity reversal)
1 power fail port
4-Ports DPT / APT / SLT / DSS / Console
TDA200 4
TDA100 2
(Ver. 1.1)
KX-TDA????
CID4
(Ver. 1.1)
TDA200 4
TDA100 2
CO Caller ID type
-> Bell/ETSI/DTMF type
NO CPU
KX-TDA????

33. KX-TDA200/100 IP-GW4 CTI-LINK Card Name Max use Function
Card Configuration
IP-GW4
Supports VoIP H.323 V.2
Voice coded: G.729a, G723.1
FAX:G3 64 Kbps ,
Physical I/F: 10 BASE-T
(occupies 2 slots)
TDA200 4
TDA100 2
(Q-SIG)
KX-TDA0480
Card Name
Max use
Function
Card Configuration
Ethernet card for CTI communication
Data controlled
Physical I/F: 10BASE-T
CPU SH7709A(133MHZ)
FLASH:512KB
SDRAM:8MB
CTI-LINK
TDA200 1
TDA100 1
(LAN I/F)
KX-TDA0410

34. IP-GW4 Card DSP CPU 10 Base T Ethernet Port SD RAM FPGA*
RS232C Maintenance Port
(Communication between Lower card
and Upper card)
Upper Card ( VoIP/H.323 control )
Lower Card ( Communication with MPR )
*FPGA: Field Programmable Gate Array

35. CTI-LINK Card LAN Controller LED1 (Card status) Flash Memory LED2
(Link status)
Trans
SD RAM
RJ45
ASIC
(MPR-LPR communication)
CPU

36. KX-TDA200/100 Not in AL version OPB3 MSG4 DPH4 DPH2 (-G) EIO4 ECHO16
Card Name
Max use
Function
Card Configuration
OPB3
CPU : SH1(12.288MHz)
ROM : 512KB(External)
RAM : 1KB(internal) 128KB(External)
TDA200 4
TDA100 2
Max 3 option cards
*Software Downloadable from PBX
(Optional base card)
KX-TDA0190
OGM for
DISA / Queuing / Wake up Calls /
Internal hold melody
DTMF detection,
CO-CO conversation
DTMF repeater functions
MSG4
TDA200 4
TDA100 2
NO CPU
Total 16 min. Max. 64 messages
for System
(4-channels)
KX-TDA0191
DPH4
TDA200 4
TDA100 2
4-port Door-phone & Door-opener card
Door-phone (T30865)
NO CPU
KX-TDA0161
DPH (-G)
TDA200 8
TDA100 4
2-port Door-phone & Door-opener card
For Germany D-phone I/F
NO CPU
KX-TDA0162
EIO4
(Ver. 1.1)
TDA200 4
TDA100 2
(External I/O)
4 Outputs (Relay) Inputs
Used for external relay / sensor
NO CPU
KX-TDA0164
ECHO16
TDA200 4
TDA100 2
16-port Echo Cancelling card
NO CPU
KX-TDA0166
Not in AL version

37. OPB-3 Card DPH2 DPH4 MSG4 CPU Flash Memory SRAM Extended I/O DSP
(rear)
DPH2
DPH4
MSG4
ASIC

38. Digital Telephones Accessories T7636 T7633 T7630 T7625 4-Position Tilt

39. T7636 6-line x 24-character display Backlight 24 Programmable keys
Dual-colour LEDs
Navigator Key
Full duplex handsfree
DXDP (version 1.1)
Headset Jack
20-character extension ID
Optional USB port
Optional 12-CO keys

40. DXDP (Available Ver 1.1) * 0.5mm cable DPT DPT SLT Up to 720m*

41. T7633 3-line x 24-character display Backlight 24 Programmable keys
Dual-colour LEDs
Navigator Key
Full duplex handsfree
DXDP (version 1.1)
Headset Jack
20-character extension ID
Optional USB port
Optional 12-CO keys

42. T7630 3-line x 24-character display 24 Programmable keys
Dual-colour LEDs
Navigator Key
Full duplex handsfree
DXDP (version 1.1)
Headset Jack
20-character extension ID

43. T7625 24 Programmable keys Dual-colour LEDs Volume Key
Full duplex handsfree
DXDP (version 1.1)
Headset Jack

44. T7640 DSS 60 DSS/BLF keys Fully-programmable flexible keys
For all T76xx models
Requires 1 digital port

45. T7603 Add-on Module 12 Programmable keys Dual-colour LEDs
Connects to DPT
No additional port required
For T7636 & T7633 only

46. T7590 DECT PS 4L x 16C Display 3 Programmable CO keys Tri-colour LED
Caller ID
Ringer
6 tone, 4 melody + vibrate
100 number directory

47. Incoming Call Distribution SMDR(Call Information data)
System Resources
Resource
TDA100
TDA200
Tenant 8 8
COS 64 64
Trunk Group 64 64
Paging Group 32 32
Call Pick up Group 64 64
Incoming Call Distribution
Group
64 (32Extn)
64 (32Extn)
Idle Hunting Group
64 (16Extn)
64 (16Extn)
VM(DPT) Group 2 2
VM(DTMF) Group 2 2
Queuing Time Table 64 64
Absent Message 9 9
Message Waiting
256
256
No. chars of the name 20 20
Extension Digits
1- 4
1- 4
Call Park Area
100
100
SMDR(Call Information data)
200
200

48. System Resources Conference Verified Code Special Carrier Code
TDA100
TDA200
Conference
10x3p – 4x8p (32CNFT)
10x3p – 4x8p (32CNFT)
Verified Code
10 digits, 1000 entries
10 digits, 1000 entries
Special Carrier Code
16 digits, 20 entries
16 digits, 20 entries
Host PBX Access Code
10 digits, 4 entries/TG
10 digits, 4 entries/TG
DDI/DID Table
16 digits, 1000 entries
16 digits, 1000 entries

49. System Resources Emergency Dial Quick Dial System Speed Dial
TDA100
TDA200
Emergency Dial
32 digits, 10 entries
32 digits, 10 entries
Quick Dial
1-4 digits, 80 entries
1-4 digits, 80 entries
System Speed Dial
32 digits, 1000 entries
32 digits, 1000 entries
Station Speed Dial
32 digits, 10 ent./Ext
32 digits, 10 ent./Ext
One Touch Dial
32 digits
32 digits
Pick up Dial
32 digits
32 digits
Key Pad protocol Dial
32 digits
32 digits
Redial
32 digits
32 digits

50. System Resources Routing Plan Leading Digits Exception Leading Digits
TDA100
TDA200
Routing Plan 16 16
Leading Digits
10 digits, 1000 entries
10 digits, 1000 entries
Exception Leading Digits
200 entries
200 entries
ARS/LCR Carrier 10 10
Itemized Code
5 digits
5 digits
Authorization Code
20 digits
20 digits
TIE Routing Table
32 entries
32 entries
Leading Digits
3 digits
3 digits
PBX Code
7 digits
7 digits
Toll Restriction Level 7 7
Toll restriction Code
7 digits, 100 entries/LV
7 digits, 100 entries/LV
Toll restriction Exception Code
16 digits, 200 entries
16 digits, 200 entries

51. 2 System Resources Charge Rate Charge Currency Charge Record for Hotel
TDA100
TDA200
Charge Rate
8 digits
8 digits
Charge Currency
3 chars
3 chars
Charge Record for Hotel
1000
2000
Call Log-Outgoing Call
0-100 log/EXTN
MAX. 640 log/Sys
0-100 log/EXTN
MAX. 640 log/Sys
Call Log-Incoming Call
0-100 log/EXTN
MAX log/Sys
0-100 log/EXTN
MAX log/Sys
Call Log-Incoming Call - ICD Group
0-100 log/EXTN
MAX. 640 log/Sys
0-100 log/EXTN
MAX. 640 log/Sys
VPS(DPT) No. of Systems
2 systems
2 systems
VPS(DPT) Number of Channels
24 CH
24 CH
Mail BOX No.Digits
16 digits
16 digits
System Password (Administrator)
4-10 digits
4-10 digits
System Password (End user)
4-10 digits
4-10 digits
Manager Password
4-10 digits
4-10 digits
Extension PIN
0-10 digits/Station
0-10 digits/Station 2

52. Features 3

53. Installation 4

54. Installation Requirements
Dedicated 240VAC Power Source
Static-Preventive procedures
Category 3 Cabling (minimum Requirement)
Avoid RF Interference (as much as possible)
Avoid HF Interference (as much as possible)
PC with TDA Maintenance s/w installed
SD Card Reader/Writer (highly recommended)

55. Main Unit Installation
Wall Mounting

56. Main Unit Installation
Floor Mounting (TDA200 only)

57. Main Unit Installation
Minimum
Clearances
10cm to left & right
20cm above
Do not place objects on
top of the Main Unit
20cm
10cm

58. Main Unit Construction

59. Power Supplies

60. RMT Card Installation
MPR Card

61. CID/Paytone Card Installation
ELCOT16 Card

62. E1 Card Installation
Trunk or Extension

63. BRI Card Installation
Trunk or Extension

64. PRI Card Installation
Trunk or Extension

65. Option Card Installation

66. Option Card Installation

67. DECT Installation
CSIF8 Card
Cabling
Refer to Handout 5

68. Start-up Precautions 6 SD Card MUST be installed.
Begin with power ‘disconnected’, not just switched off.
Discharge static before touching anything on the system.
See Getting Started Guide 6

69. Programming

70. Programming 7 Windows-based Maintenance Console Structured Menu system
Multi-connection
RS232c/USB/Modem/LAN/ISDN Remote
SD Card Backup feature
Diagnostics
BRI Auto-configuration 7

71. Connection LAN Connection via CTI Link Card
Modem Connection via RMT Card
External Modem Connection
ISDN Modem Connection

72. PC Programming Software

73. Troubleshooting & Diagnostics

74. Troubleshooting & Diagnostics
Built-in Diagnostics
Initial self-diagnostic test
Various on-line diagnostic tests
Background
Manual
Regular
Digital Line Error Rate monitor

75. Troubleshooting & Diagnostics
Self-diagnosis
Hardware is tested for each individual card at start-up.
Error indication is shown on the card LEDs.
Errors are recorded in the system log.

76. Troubleshooting & Diagnostics
On-line Diagnostics
Periodical ‘active’ tests.
Hardware Interrupt monitoring
Reporting by:
System Alarm LED
Card Status LED
Error Log
Local Alarm
Remote Alarm

77. Troubleshooting & Diagnostics
LED1 : Battery Alarm
LED2 : SD card access
MPU Card

78. Troubleshooting & Diagnostics
Option Cards
LED1
OFF
G ON
G Flash
R ON
R Flash
: Power OFF
: Normal (all idle)
: Normal (in use)
: Fault / Reset
: Out of Service

79. Troubleshooting & Diagnostics
Local Alarm
On-site notification
Alarm button programmed on DPT
Remote Alarm
PC Console / PC Phone
Local Alarm creates message

80. Troubleshooting & Diagnostics

81. Troubleshooting & Diagnostics
Internet
System
PC Console or PC Phone
DPT
SMTP Server
Customer Site
Dealer Site

82. Thank You