1. Work, Power, and Machines
Chapter 9.1
Work, Power, and Machines

2. Work is defined as a quantity that measures the effects of a force acting over a distance – if nothing gets moved from one place to another, there is NO WORK DONE!

3. Work Equation W = F X d Work = force x distance Units: Force = Newtons
Distance = meters, kilometers
Work – Joules

5. Power is calculated Power = work/time P = __W___ T
and is measured in watts (W)
make sure it’s a capital “W”

7. What is a JOULE? Just like Newton means kg m/s2
Joule means the same as 1 N – M
(1 Newton-Meter) meaning the amount of work done lifting something with a weight of 1 Newton through a distance of 1 meter.

8. Power defined: quantity that measures the rate at which work is done.
i.e., (how fast!)
If we both do the same work, but you do it faster, you are more “powerful”

9. Mechanical Advantage
Simply put, it’s how much help we get from the machine.
How much the machine “multiplies” our
efforts.
Or how much it increases our distance.
(think about how little your wrist moves when bat, and how wide the other end of the bat swings through the air.

10. Mechanical Advantage Equation
either
output force or input distance
input force output distance
INPUT is what you do
OUTPUT is the work that gets done,
thanks to the machine’s help! M

12. Example Problem:
A crate of bananas weighing 3000 N is lifted using a pulley.
If 500 N of force is applied (the effort force), what is the
mechanical advantage of the pulley?
M.A. (mechanical advantage) = Force out / Force in
So, M.A. = 3000 N / 500 N = 6
This means that the force needed to lift the crate is reduced
by 6 times the weight of the crate.

13. Example :
A screwdriver is used to open a can of paint. The distance
that the arm is moved downward is 4 cm, while the lid moves
0.5 cm before popping open.
M.A. = distance in / distance out
M.A. = 4 cm / .5 cm = 8

14. The Inclined Plane (Ramp or screw)
- reduces the effort force needed by increasing
the distance through which the force is applied.
10 m
2 m
The ideal mechanical advantage is equal to the length
of the run divided by the height of the rise.
M.A. = 10 m / 2 m = 5

15. Another way to calculate the mechanical advantage:
M.A. = Force out / Force in
Example: A 3500 N piano is moved up a small fight of stairs
by using a ramp. If the piano movers only push with a force
of 500 N, what is the mechanical advantage?
M.A. = 3500 N / 500 N = 7