1. Insert the CD Click on Play

2. Input Devices Output Devices Processor Memory Storage Devices that used to Input data into the computer in the form of machine code. Devices that used to output information to users or other machines Processing- Changing data into useful formation for Human needs

3. BLOCK DIAGRAM

5. 1. Input Devices Peripheral devices that are used to enter commands or information into a computer, such as the keyboard, mouse, joystick, modem, scanner, and touch screen.

6. Key Board Joy Stick Digital Camera Input Device –Contd.

7. Pointing devices Input Device –Contd. Track ball Wireless optical mouseTouch pad Track stick

8. Scanner Bar code reader Microphone Input Device –Contd.

9. BACK Web Camera Punch card Digitizer

10. Input Device –Contd. BACK Touch Screen Light pen

11. Input Device –Contd. BACK Data Glove The Data-Glove is the device that most people think of when talking about VR input devices. It is the device that allows us to do everything in the virtual world that our real hand can do in the real world. The data glove is the translator from real to virtual.

12. 2. Output Devices Any machine capable of representing information from a computer. This includes display screens, printers, plotters, and Disk etc..

13. Output Device –Contd. CRT Monitor Laser Printer Inkjet Printer Plotter Dot matrix Printer

14. Output Device –Contd. BACK More Head phone Punch card machine

15. 3. Storages/Memory BACK Internal storage areas in the computer. The term memory identifies data storage that comes in the form of chips, and the word storage is used for memory that exists on tapes or disks. Moreover, the term memory is usually used as a shorthand for physical memory, which refers to the actual chips capable of holding data. Some computers also use virtual memory, which expands physical memory onto a hard disk. Every computer comes with a certain amount of physical memory, usually referred to as main memory or RAM. You can think of main memory as an array of boxes, each of which can hold a single byte of information. A computer that has 1 megabyte of memory, therefore, can hold about 1 million bytes (or characters) of information.

16. DDR-RAM DIMM-RAM RAMBUS Memory BACK

17. There are several different types of memory: RAM (random-access memory): This is the same as main memory. When used by itself, the term RAM refers to read and write memory; that is, you can both write data into RAM and read data from RAM. This is in contrast to ROM, which permits you only to read data. Most RAM is volatile, which means that it requires a steady flow of electricity to maintain its contents. As soon as the power is turned off, whatever data was in RAM is lost. ROM (read-only memory): Computers almost always contain a small amount of read-only memory that holds instructions for starting up the computer. Unlike RAM, ROM cannot be written to. PROM (programmable read-only memory): A PROM is a memory chip on which you can store a program. But once the PROM has been used, you cannot wipe it clean and use it to store something else. Like ROMs, PROMs are non-volatile. EPROM (erasable programmable read-only memory): An EPROM is a special type of PROM that can be erased by exposing it to ultraviolet light. EEPROM (electrically erasable programmable read-only memory): An EEPROM is a special type of PROM that can be erased by exposing it to an electrical charge

18. Magnetic Tape (Mass storage for Backup) Hard Disk Drive Flash drive / Thumb drive (Removable)

19. 5 1 / 2 Floppy disk 3 1 / 2 Floppy disk 1.44 MB Zip Disk 1.44 100MB CD 640/700MB Removable Storage

20. Types of CDs (640MB/700MB) CD- ROM = Compact Disc Read Only Memory CD-R = Compact Disc Recordable (Once) CD-RW= Compact Disc Rewritable (Many time) Diameter 12cm Thickness 1.2cm

21. DVD-R/RW Formats Five types of recordable DVD products currently exist on the market. Some are approved and supported by the DVD Forum and some are not. Industry standard and recognised by the DVD Forum: DVD-R = DVD Recordable DVD-RW = DVD Rewritable DVD-RAM = DVD Random Access Memory Types of DVDs (Digital Versatile Disc) Single Side Single layer = 4.5GB Double Side Single layer = 9.4GB Single Side Double layer = 8.54GB Double Side Double layer = 17GB

23. The main differences between the CD and DVD are summarized in the following table: FeatureDVDCD-ROM Substrate diameter / thickness (mm)120 / 1.2 Sides1 or 21 Layers per side1 or 21 Capacity (GB)4.7, 8.54, 9.4, or 17~ 0.7 Track pitch (microns)0.741.6 Min pit length (microns)0.4 - 0.440.83 Linear velocity used for scan (m/s) 3.5 - 3.841.3 Laser wavelength (nm)635 or 650780 Numerical aperture0.60.45 Modulation8 to 16EFM (8 to 17) Error correction code (ECC)RSPCCIRC Durability and dust/scratchsame as that of CDhigh

24. Backwards compatibility with current CD media (at least the newest models of DVD drives) Physical dimensions identical to compact disc with total thickness equal to 1.2 mm, but with capacity at least 7 times larger than that of CD. Capacities of 4.7 GB, 8.54 GB, 9.4 GB, and 17.08 GB, depending on the disk structure. Single-layer/dual-layer and single/double sided options. DVD replication process is similar to that used for compact disks. A disc-based format means fast random access like in hard drives and CDs and unlike tapes. Designed from the outset for video, audio and multimedia. Meets the requirement for 133 minutes of high quality video on one side of a disk. DVD-ROM for enhanced multimedia and games applications. DVD-Video for full length high quality movies on one disc. DVD-Audio for higher quality music, surround sound and optional video, graphics and other features. All formats use a common file system. Copy protection built into standard (unless it is broken...) The main features of the DVD formats can be summarized as follows:

25. 4. Processor A silicon chip that contains a CPU. In the world of personal computers, the terms microprocessor and CPU are used interchangeably. At the heart of all personal computers and most workstations sits a microprocessor. Microprocessors also control the logic of almost all digital devices, from clock radios to fuel-injection systems for automobiles.

26. Central Processing Unit (CPU) The central processing unit performs the majority of calculations and controls the operation of a computer. CPUs are rated by the speed at which they can execute instructions. The speed of a CPU is measured in Megahertz (MHz), and is also known as the clock speed. The higher the value of the speed the faster the computer can run programs. The capacity of a CPU is expressed in terms of word size. A word is the maximum number of bits that the CPU can manipulate or store at one time

28. BACK CPU –Contd.

29. 01001010 01101010 01101111 10001111 10000000