1. OMEGA ® Scanner Overview

2. Introduction The OMEGA® Tracer® System allows practitioners to create prosthetic and orthotic devices electronically instead of with plaster The system features the OMEGA Scanner – Hand-held laser scanner – Non-contact – Completely portable

3. The contours of the shape being captured are determined by a pulsed crosshair laser that is emitted from the Scanner. Simultaneously, LEDs illuminate reflective targets on the surface of the shape so that digital cameras in the Scanner can record the position of the targets in space.

4. Capable of scanning directly over skin, sock, liner, plaster, or foam Able to scan complex and intricate or detailed shapes and surfaces Can pause and resume scanning during the scanning session Can merge two scans to create a shape

5. OMEGA Scanner Applications

6. Prosthetic Below Knee Above Knee Below Elbow Above Elbow Breast Orthotic Insole AFO Cranial Knee Spinal

7. Alpha DESIGN ® Liners Upper and lower extremity shapes captured with the Scanner can be used as the basis for creating custom Alpha Liners Ideal for providing comfort and protection for patients who are not suited for off-the-shelf components

8. Below Knee Example

9. Above Knee Example

10. Below Elbow Applications Accommodates various levels of amputation for Below Elbow as well as Wrist Disarticulation patients Skin-fit suction sockets DESIGN liners

11. Above Elbow Applications Accommodates various levels of amputation for the Above Elbow, as well as Elbow and Shoulder Disarticulations DESIGN liners

12. Custom Breast Prostheses Scans of the intact breast and surgical site are taken and merged into a single shape in the software Order form is completed within Tracer and is sent to a WillowWood fabrication partner with the shape file for fabrication

13. Insoles Direct scan of foot Scan of foam impression

14. AFOs Scan the outer surface of a negative model Scan the inner surface of 2 halves of a negative model Scan the limb with the foot in a foam impression box

15. Cranial Remolding Helmets After the shape is captured with the OMEGA Scanner and modified as desired, the file is sent to an FDA-approved partner for fabrication

16. Knee Braces Knee shapes can be captured using the OMEGA Scanner and sent to the desired manufacturer for brace fabrication

17. Spinals Scan the patient directly or scan a cast of the patient

18. Using the Scanner Hand-held, non-contact, portable Captures intricate detail Wide range of orthotic and prosthetic applications

19. OMEGA ® Scanner Overview