1. UNITRONICS
Server
WEB
Send

2. What are we going to review ?
How to Send ?
How to use Web Server ?
2/18

3. UNITRONICS
Server
WEB
3/18

4. Web Server Enhanced Vision controllers can host web pages.
The controller must comprise a TCP/IP port, and must be connected to an Ethernet network.
If the controller contains web pages, a remote user can enter the
IP address of the controller into a web browser and view the pages.
4/18

5. Only One Net in the Ladder
Selecting HTTP sets the local port to 80 and the controller to slave.
5/18

6. Web Server Configuration
Click the Web Server Configuration icon on the VisiLogic toolbar to open the utility.
Click in the Web Page Name field and type in a page name.
6/18

7. Alarms & Warnings Configure Alarm colors for register values by
clicking in the Alarms & Warnings column.
7/18

8. Web Page
Home Page –
Information
8/18

9. Web Page
9/18

10. Web Page Web Page Capacity V570 and V350 series is 128k.
requirements of your pages by checking Pages>Calculate Memory Allocation.
10/18

11. VisiLogic application
Lets Open
VisiLogic application
11/18

12. UNITRONICS
Thank You
12/18

13. UNITRONICS
Send
13/18

14. Send E-Mail This function is located on the Com>TCP/IP menu.
This function enables a controller to send an in response to Ladder conditions. In order to send , the controller must comprise a TCP/IP port, and must be connected to an Ethernet network with access to an SMTP or ESMTP server
The utility is under COM  TCP/IP
14/18

15. How to send e-mail throw the visilogic ladder ?
Configure Ethernet in your application by building a net
that comprises the following elements:
Establish Ethernet Connection using the
Com>TCP/IP>TCP/IP Connect Socket function.
The function must be configured to your mail server IP,
and to Port 25, which is the outgoing messages port.
15/18

16. Send the e-mail using the Com>TCP/IP>Send e-mail function
SB 345 Send in Progress to to avoid communication conflicts
Close the connection and free the socket
16/18

17. How to send e-mail throw the visilogic ladder ?
Configuring the Send Function
Fill in the parameters
Applies to all Visions
17/18

18. VisiLogic application
Lets Open
VisiLogic application
18/18