Presentation is loading. Please wait.

Presentation is loading. Please wait.

Section 1 Dr.Hoda’s part Sheet 1: Calculating equipment cost Eng. Reda Zein.

Similar presentations


Presentation on theme: "Section 1 Dr.Hoda’s part Sheet 1: Calculating equipment cost Eng. Reda Zein."— Presentation transcript:

1 Section 1 Dr.Hoda’s part Sheet 1: Calculating equipment cost Eng. Reda Zein

2 Section timeSectionsPlace 8:30 - 101,433307 2 - 3:302,333129

3   Why we need to calculate it?  Equipment cost could be calculated using: 1- Chart OR 2- Equation OR 3- Table Equipment Cost

4  1- Size of equipment (e.g.: diameter, height, volume or area of heat transfer). 2- Material of construction. 3- Operating conditions (e.g.: pressure). Factors to be taken under consideration in getting equipment cost

5  Cost index

6  Let’s begin first sheet

7 1) Estimate the cost of the following: (a) Condenser ; fixed tube sheets, area 25.3 m 2, carbon steel shell and tubes, operating pressure 1 bar. (Ans.=£ 3040) (b) Cooler ; U tubes, area 10.1 m 2, carbon steel shell and tubes, operating pressure 5 bar. (Ans.=£ 1785)

8

9 3) Estimate the cost of a recovery column, date mid-1979 ; diameter 1 m, vessel overall height 20 m, 35 sieve plates, vessel and plates are stainless steel, operating pressure 1 bar. (Ans.=£ 41000) Note: The cost of a specialized equipment that can not be found in literature, so it can usually be estimated from the cost of components that make up the equipment.

10 5) Estimate the cost of the following equipment, date mid-1979, absorption column ; diameter 1 m, vessel overall height 15 m, packed height 12 m, packing 38 mm stainless steel pall rings, vessel carbon steel, operating pressure 5 bar. (Ans.=£ 11000)

11  Any questions?


Download ppt "Section 1 Dr.Hoda’s part Sheet 1: Calculating equipment cost Eng. Reda Zein."

Similar presentations


Ads by Google